Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Stereoselectivity titanium enolates

Moreover, stereoselective titanium enolate additions to different iV-sulfinyl imines113 114 or in situ-prepared iV-arylimines (three-component reaction) have been carried out to afford the corresponding sulfinyl amides or valuable /3-amino acid precursors.115... [Pg.420]

Stereoselectivities of 99% are also obtained by Mukaiyama type aldol reactions (cf. p. 58) of the titanium enolate of Masamune s chired a-silyloxy ketone with aldehydes. An excess of titanium reagent (s 2 mol) must be used to prevent interference by the lithium salt formed, when the titanium enolate is generated via the lithium enolate (C. Siegel, 1989). The mechanism and the stereochemistry are the same as with the boron enolate. [Pg.62]

A more effective control of both simple diastereoselectivity and induced stereoselectivity is provided by the titanium enolate generated in situ by transmetalation of deprotonated 2,6-dimethylphenyl propanoate with chloro(cyclopentadienyl)bis(l,2 5,6-di-0-isopropylidene-a-D-glucofuranos-3-0-yl)titanium. Reaction of this titanium enolate with aldehydes yields predominantly the. yyw-adducts (syn/anti 89 11 to 97 3). The chemical yields of the adducts are 24 87% while the n-u-products have 93 to 98% ee62. [Pg.475]

In another approach, a glucose-derived titanium enolate is used in order to accomplish stereoselective aldol additions. Again the chiral information lies in the metallic portion of the enolate. Thus, the lithiated /m-butyl acetate is transmetalated with chloro(cyclopentadienyl)bis(l,2 5,6-di-0-isopropylidene- -D-glucofuranos-3-0-yl)titanium (see Section I.3.4.2.2.I. and 1.3.4.2.2.2.). The titanium enolate 5 is reacted in situ with aldehydes to provide, after hydrolysis, /i-hydroxy-carboxylic acids with 90 95% ee and the chiral auxiliary reagent can be recovered76. [Pg.488]

Titanium enolates, which are weak Lewis acids, add to 2-alkoxyaldehydes with remarkable stereoselectivity under nonchelation control 1. Thus, 2-benzyloxypropanal is attacked by the tris(isopropyloxy)titanium enolate 7 preferably from the 57-face, to give a 87 13 mixture of adducts with complete simple diastereoselectivity3,1. [Pg.565]

Among the preformed enol derivatives used in this way have been enolates of magnesium, lithium, titanium, zirconium, and tin, ° silyl enol ethers, enol borinates,and enol borates, R CH=CR"—OB(OR)2. The nucleophilicity of silyl enol ethers has been examined. In general, metallic Z enolates give the syn (or erythro) pair, and this reaction is highly useful for the diastereoselective synthesis of these products. The ( ) isomers generally react nonstereoselectively. However, anti (or threo) stereoselectivity has been achieved in a number of cases, with titanium enolates, with magnesium enolates, with certain enol bor-inates, and with lithium enolates at — 78°C. ... [Pg.1221]

Titanium enolates can also be used under conditions in which the titanium exists as an ate species. Crossed aldehyde-aldehyde additions have been accomplished starting with trimethylsilyl enol ethers, which are converted to lithium enolates and then to ate species by addition of Ti(0- -Bu)4.26 These conditions show only modest stereoselectivity. [Pg.75]

Entry 6 involves a titanium enolate of an ethyl ketone. The aldehyde has no nearby stereocenters. Systems with this substitution pattern have been shown to lead to a 2,2 syn relationship between the methyl groups flanking the ketone, and in this case, the (3-siloxy substituent has little effect on the stereoselectivity. The configuration (Z) and conformation of the enolate determines the 2,3-vyn stereochemistry.113... [Pg.108]

Titanium enolates also can be prepared from /V-acyloxazolidinones. These Z-enolates, which are chelated with the oxazolidinone carbonyl oxygen,128 show syn stereoselectivity, and the oxazolidinone substituent exerts facial selectivity. [Pg.116]

As is the case for aldol addition, chiral auxiliaries and catalysts can be used to control stereoselectivity in conjugate addition reactions. Oxazolidinone chiral auxiliaries have been used in both the nucleophilic and electrophilic components under Lewis acid-catalyzed conditions. (V-Acyloxazolidinones can be converted to nucleophilic titanium enolates with TiCl3(0-/-Pr).320... [Pg.193]

The stereoselective addition of the titanium enolate of A-acetyl-4-phenyl-l,3-thiazolidine-2-thione 153 to the cyclic A-acyl iminium ion 154 is utilized in the synthesis of (-)-stemoamide, a tricyclic alkaloid <06JOC3287>. The iminium ion addition product 155 undergoes magnesium bromide-catalyzed awtz-aldol reaction with cinnamaldehyde 156 to give adduct 157, which possesses the required stereochemistry of all chiral centers for the synthesis of (-)-stemoamide. [Pg.255]

Based on a similar literature method,116 stereoselective coupling reactions between various 3-acetoxy-4-alkyl-/3-lactams and in situ-generated titanium enolates of cyclohexanone117 or propiophenone derivatives were developed, yielding the corresponding a,/3-disubstituted /3-lactams. [Pg.420]

Covalently bonded chiral auxiliaries readily induce high stereoselectivity for propionate enolates, while the case of acetate enolates has proved to be difficult. Alkylation of carbonyl compound with a novel cyclopentadienyl titanium carbohydrate complex has been found to give high stereoselectivity,44 and a variety of ft-hydroxyl carboxylic acids are accessible with 90-95% optical yields. This compound was also tested in enantioselective aldol reactions. Transmetalation of the relatively stable lithium enolate of t-butyl acetate with chloro(cyclopentadienyl)-bis(l,2 5,6-di-<9-isopropylidene-a-D-glucofuranose-3-0-yl)titanate provided the titanium enolate 66. Reaction of 66 with aldehydes gave -hydroxy esters in high ee (Scheme 3-23). [Pg.155]

As the t-butyl group can readily be removed upon acidic or basic hydrolysis, this method can also be used for //-hydroxyl acid synthesis. In analogy with allylation reactions, the enolate added preferentially to the Re-face of the aldehydes in aldol reactions. Titanium enolate 66 tolerates elevated temperatures, while the enantioselectivity of the reaction is almost temperature independent. The reaction can be carried out even at room temperature without significant loss of stereoselectivity. We can thus conclude that this reaction has the following notable advantages High enantiomeric excess can be obtained (ee > 90%) the reaction can be carried out at relatively high temperature the chiral auxiliary is readily available and the chiral auxiliary can easily be recovered.44... [Pg.155]

Further process optimization by Thiruvengadam and co-workers (Thimvengadam et al., 1999), led to a novel, stereoselective, scalable two-step process devoid of chromatography for chiral 2-azetidinone construction (Scheme 13.4). As above, the titanium-enolate of chiral oxazolidinone 11a was preformed, but now when reacted with well behaved imines of type 16, affords the unexpected anti-addition product. This surprising result was further supported by careful comparison to minor antiproducts obtained in the earlier aldol-addition methodology and determination that the major product was indeed 17a (undesired RSR series). Adjustment of the oxazolidinone absolute stereochemistry to the fortuitously less expensive 2S-series afforded the desired diastereo-mer 17b in 95% de and in 50-70% yield. Recrystallization improved the stereochemical purity to >99% de. [Pg.191]

Lactams are also prepared in a highly stereoselective fashion, in good yields, by treatment of imines with titanium enolates of 2-pyridylthioesters (equation 161)577-580 and similar compounds581,582. [Pg.751]

In contrast to titanium enolates of ketones, titanium enolates of aldehydes exhibit practically no stereoselectivity in aldol reactions. However, titanation of dimethylhy-drazones of aldehydes with 1 results in substrates (2) that show high eryt/iro-selecti v i ty in aldol-type reactions with aldehydes (equation I). Bromotitanium tris(diethylamide) can be used in place of 1, but is less efficient, as is Ti(IV) isopropoxide.6... [Pg.193]

Thus, with proper choice of chiral template and aldehyde, all four possible syn- and anti-aldol products can be prepared with predictable stereochemistry. Both boron and titanium enolate methodologies have been successfully applied to the stereoselective syntheses of several biologically active compounds66-69 and natural product synthons.61-70-71... [Pg.468]

The addition of a chiral ketone enolate to an aldehyde displays not only simple diastereoselectivlty, but also highly induced stereoselectivity, as shown by Fecik and coworkers for the formal total synthesis of the polyketide macrolactone narbonoMe (92, equation 27). This reaction demonstrates the successful application of titanium in aldol additions for the highly stereoselective construction of two new stereogenic centers by addition of aldehyde 90 to the titanium enolate of Evans S-keto imide 89 the iyw-aldol product 91 was obtained exclusively in 74% yield. Interestingly, there is no detectable loss of stereochemistry via enolization at the potentially labile C2-methyl-bearing stereocenter in 89 ... [Pg.373]

A wide series of oxidants, spanning from TiCLj to iodine, has been used in the oxidative homocoupling of chiral 3-arylpropionic acid derivatives aimed at the preparation of lignans. The /f,/f-selectivity in the reactivity of 34 has been explained by a radical coupling mechanism (equation 20). The initially formed lithium (Z)-enolate may transform into the titanium enolate 35, which undergoes oxidation to the radical intermediate 36 via a single electron transfer process. The iyw-Z-type radicals 36 couple each other at the less hindered S-side si face) to give the R,/f-isomers 37 stereoselectively. [Pg.474]

Trichlorotitanium enolates are directly prepared from a ketone, TiCU, and a tertiary amine [122,123] and undergo aldol reactions with aldehydes [124-129], ketones [129], and imines [130,131], Intramolecular condensation with esters is also known [132-137], Although these reactions, based on a titanium enolate [16], which often results in high diastereoselectivity in aldol and related reactions [122], will not be discussed in detail in this article, the success of the alkylation of this titanium enolate with SNl-active electrophiles should be discussed owing to the high Lewis acidity of the metal center [123], Equation (37) shows stereoselective alkylation with an orthoacetate, which is usually inert to alkali metal enolates [138], Aminoalkylation of trichlorotitanium enolates with (a-chloroalkyl)amine has been performed analogously [139,140],... [Pg.673]

Later in the book, when we deal with asymmetric enolate reactions, boron enolates will be very important. A simple example20 of an aldol reaction with a boron enolate, prepared from the ester 149 and a boron triflate using an amine as base, shows why. The boron enolate 150 could be prepared with a weak base and reacts with the aldehyde without catalysis to give essentially one diastereoisomer of the aldol 151 in good yield. If the titanium enolate (prepared with TiCI4 and an amine) was used, both the yield and the stereoselectivity were worse. In other circumstances enolates of titanium and other metals are very successful. [Pg.152]

Under kinetic control, the reactions of prochiral aldehydes with Z-enolates generally lead to syn aldols, while E-enolates lead to anti aldols. The presence of bulky R groups on the enolates, however, may alter these selectivities. The highest diastereoselectivities are observed with boron or titanium enolates. These selectivity trends are interpreted by a concerted cyclic mechanism. The favored transition state resembles a distorted chair, in line with the Zimmermann-Traxler proposals [57, 160, 253] (Figure 6.70). This model has been supported by theoretical studies [9, 40, 41, 125, 1249], Transition states analogous to C2 and C4 (Figure 6.70) are destabilized by 1,3-ecIipsing interactions between the C-R, M-L and C-R bonds, so that models Ci and C3 are more favorable. For the sake of simplification, only the reaction on one face of the enolates is shown in these models, but enolate face selectivity will be discussed later. In some cases, boatlike transition-state models are invoked to interpret selectivity inversions [401, 402, 666], Moreover, Heathcock and coworkers [105] obtained evidence for the influence of an excess of n-B BOTf on the stereoselectivity of the aldol reactions of Z-enolates. In such reactions, anti aldols can be formed preferentially (see bdow). [Pg.308]

Due to the importance of polypropionate antibiotics, mainy chiral auxiliaries have been introduced on propionic add derivatives in order to perform asymmetric aldol reactions. The use of esters of chiral alcohols usually gives disappointing results [147, 209]. In an important exception, Braun and Sacha [149] recommended the propionate of a trimethylsilyloxyalcohol 1.12. The reaction of the derived dicyclopentylchlorozirconium enolate with aliphatic aldehydes at -105°C leads to anti aldols with an excellent fedal stereoselectivity (Figure 6.78). The selectivity is lower with benzaldehyde. The use of titanium enolates of N-tosyl-aminoephedrine 1.61 (R = Ts) propionate has recently been advocated [1262],... [Pg.322]


See other pages where Stereoselectivity titanium enolates is mentioned: [Pg.110]    [Pg.136]    [Pg.255]    [Pg.127]    [Pg.942]    [Pg.352]    [Pg.208]    [Pg.517]    [Pg.38]    [Pg.58]    [Pg.373]    [Pg.473]    [Pg.486]    [Pg.487]    [Pg.705]    [Pg.354]    [Pg.255]    [Pg.285]    [Pg.288]    [Pg.289]    [Pg.161]   


SEARCH



Enolates stereoselectivity

Enolates titanium

Enolization stereoselectivity

Titanium enolate

Titanium enolates syn stereoselectivity

Titanium, tris enolates aldol reaction, syn stereoselectivity

© 2024 chempedia.info