Steam fluid catalytic cracking

Olefins are hydrocarbon compounds with at least two carbon atoms and having a double bond. Their unstable nature and tendency to polymerize makes them one of the very important building blocks for the chemical and petrochemical industry (Gary and Handwerk, 1994). Although olefins are produced by fluid catalytic cracking in refineries, the main production source is through steam cracking of liquefied petroleum gas (LPG), naphtha or gas oils. 

Chapter 7 is the climax of the book Here the educated student is asked to apply all that he/she has learned thus far to deal with many common practical industrial units. In Chapter 7 we start with a simple illustrative example in Section 7.1 and introduce five important industrial processes, namely fluid catalytic cracking in FCC units in Section 7.2, the UNIPOL process in Section 7.3, industrial steam reformers and methanators in Section 7.4, the production of styrene in Section 7.5, and the production of bioethanol in Section 7.6. 

Carbon rejection processes, visbreaking, steam cracking, fluid catalytic cracking, and coking. 

In the process, a residuum is desulfurized and the nonvolatile fraction from the hydrodesulfurizer is charged to the residuum fluid catalytic cracking unit. The reaction system is an external vertical riser terminating in a closed cyclone system. Dispersion steam in amounts higher than that used for gas oils is used to assist in the vaporization of any volatile constituents of heavy feedstocks. 

In the S W fluid catalytic cracking process (Figure 8-15), the heavy feedstock is injected into a stabilized, upward flowing catalyst stream whereupon the feedstock-steam-catalyst mixture travels up the riser and is separated by a high efficiency inertial separator. The product vapor goes overhead to the main fractionator (Long, 1987). 

Fluid catalytic cracking (FCC) of heavy oil fractions is a well-known process in oil refineries. Numerous books (e.g., 1—3) and publications about the different aspects of this subject are available. This chapter is concerned with the modeling of the transfer line or riser reactor of an FCC unit (FCCU) or of a pilot plant. The riser reactor in FCCUs is a vertical pipe about 1 m in diameter and 10-30 m in height. The hot catalyst coming from the regenerator at about 710 ° C first comes in contact with steam and is fluidized. Then, at a height of some meters above, the catalyst is mixed with the preheated feedstock at about 300 ° C. 

The olefins ethylene and propylene are highly important synthetic chemicals in the petrochemical industry. Large quantities of such chemicals are used as feedstock in the production of polyethylene, polypropylene, and so on [31]. The prime source of lower olefins is the olefin-paraffin mixtures from steam cracking or fluid catalytic cracking in the refining process [32]. Such mixtures are intrinsically difficult to... 

The use of molecular sieve catalysts has also become more widespread in the past decade for the production and inter-conversion of olefins from feedstocks other than oxygenates. The addition of a modified ZSM-5 additive to the Y zeolite-based catalyst can substantially increase the amount of propylene produced in a conventional Fluid Catalytic Cracking (FCC) unit. This has become a very valuable modification, particularly in areas where propylene supplies are tight. More recently, a number of processes have been announced for the direct cracking of C4+ olefinic steams to propylene. These processes also use modified ZSM-5 based... 

Recent literature shows a growing trend to include free alumina in the formulation of fluid catalytic cracking (FCC) products. Over the last dozen years, FCC catalysts containing free alumina have been cited in the open and patent literature for benefits including (1) enhanced catalyst reactivity and selectivity (1-3). (2) more robust operation in the presence of metals in the petroleum feedstock (4-7). (3) improved attrition resistance (8.9). (4) improved hydrothermal stability against steam deactivation during regeneration (2.8). (5) increased pore volume and decreased bulk density (8), and (6) reduction of SOx emissions (10). 

For some widely practiced processes, especially in the petroleum industry, reliable and convenient computerized models are available from a number of vendors or, by license, from proprietary sources. Included are reactor-regenerator of fluid catalytic cracking, hydro-treating, hydrocracking, alkylation with HF or H2SO4, reforming with Pt or Pt-Re catalysts, tubular steam cracking of hydrocarbon fractions, noncatalytic pyrolysis to ethylene, ammonia synthesis, and other processes by suppliers of catalysts. Vendors of some process simulations are listed in the CEP Software Directory (AIChE, 1994). 

Contaminant-Metal Deactivation and Metal-Dehydrogenation Effects During Cyclic Propylene Steaming of Fluid Catalytic Cracking Catalysts... 

One particular advantage of the CDTECH process is the ability of the alkylation reactor to accept a dilute ethylene feed. Because the alkylator operates in a mixed vapor-liquid phase, it is capable of utilizing dilute ethylene feeds, for example, offgas from a fluid catalytic cracking plant or dilute ethylene from a steam... 

---