Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Stainless steels copper

Packed Columns A packed column is constructed from glass, stainless steel, copper or aluminum and is typically 2-6 m in length, with an internal diameter of 2-4 mm. The column is filled with a particulate solid support, with particle diameters ranging from 37-44 pm to 250-354 pm. [Pg.564]

Handling and Safety Factors. Oxygen difluoride can be handled easily and safely in glass and in common metals such as stainless steel, copper, aluminum. Monel, and nickel, from cryogenic temperatures to 200°C (4). At higher temperatures only nickel and Monel are recommended. The compatibihty of OF2 with process equipment depends largely on the cleanliness of the equipment contaminants such as dkt, moisture, oil, grease, scale... [Pg.220]

Shipment nd Stora.ge, Sulfur monochloride is minimally corrosive to carbon steel and iron when dry. If it is necessary to avoid discoloration caused by iron sulfide formation or chloride stress cracking, 310 stainless steel should be used. Sulfur monochloride is shipped in tank cars, tank tmcks, and steel dmms. When wet, it behaves like hydrochloric acid and attacks steel, cast iron, aluminum, stainless steels, copper and copper alloys, and many nickel-based materials. Alloys of 62 Ni—28 Mo and 54 Ni—15 Cr—16 Mo are useful under these conditions. Under DOT HM-181 sulfur monochloride is classified as a Poison Inhalation Hazard (PIH) Zone B, as well as a Corrosive Material (DOT Hazard Class B). Shipment information is available (140). [Pg.138]

The cathodic protection of plain carbon and low-alloy steels can be achieved with galvanic anodes of zinc, aluminum or magnesium. For materials with relatively more positive protection potentials (e.g., stainless steels, copper, nickel or tin alloys), galvanic anodes of iron or of activated lead can be used. [Pg.180]

PVC, polythene and PTFE if moist gas is used Stainless steel, copper, nickel. Monel, brass, aluminium for dry gas <200°C. Borosilicate glass for low pressures. For moist gas, copper and polyvinylidene chloride plastics Monel and nickel Monel and nickel Most common metals so long as gas is dry... [Pg.266]

Ethyl acetylene E Steel and stainless steel Copper, other metals capable of... [Pg.267]

Inconel, stainless steel, copper and glass -Hastelloy C-line equipment Any common metal for normal temperatures. [Pg.268]

Many fluorides are corrosive to glass and some metals Even the very corrosive anhydrous fluorides, however, can be handled at room temperature in steel, stainless steel, copper, and Teflon equipment For reactions at higher temperature, nickel and Monel metal are indispensable More data on corrosion of matenals are given in pages 22 and 23 of Chemistry of Organic Fluorine Cowjpoundi, published in 1676... [Pg.26]

All figures are on a dumped basis. Metal Lessing Rings are also made in stainless steel, copper, and aluminum. [Pg.250]

Plain tubes (either as solid wall or duplex) are available in carbon steel, carbon alloy steels, stainless steels, copper, brass and alloys, cupro-nickel, nickel, monel, tantalum, carbon, glass, and other special materials. Usually there is no great problem in selecting an available tube material. However, when its assembly into the tubesheet along with the resulting fabrication problems are considered, the selection of the tube alone is only part of a coordinated design. Plain-tube mechanical data and dimensions are given in Tables 10-3 and 10-4. [Pg.10]

British Standard Method for Determination of Resistance to Intergranular Corrosion of A ustenltic Stainless Steels Copper sulphate-Sulphuric acid Method (Moneypenny Strauss Test) BS 5903 (1980)... [Pg.1227]

Test methods for determining electrolytic corrosion with electrical insulating materials Method for determination of resistance to intergranular corrosion of austenitic stainless steels copper sulphate-sulphuric acid method (Moneypenny Strauss test) Specification for electroplated coatings of tin/lead alloys... [Pg.1097]

Any common metal Steel, stainless steel, copper or brass for dry gas. [Pg.188]

Most common metals Cast iron and stainless steel <120 C, steel =s175°C, Inconel, nickel and platinum 400°C Most common metals Glass, stainless steel, copper, Monel or nickel 200 C. At higher temperatures only nickel and Monel are recommended Glass, stainless steel. Teflon Hypalon, aluminium Tygon PVC and polythene... [Pg.192]

Boron trifluoride c T Stainless steel, copper. Rubber, nylon, phenolic resins. [Pg.195]

Carbonyl fluoride C F T Steel, stainless steel, copper or brass for dry gas. Monel, copper or nickel for moist gas ... [Pg.195]

It is also known as the chromatographic column . In reality the heart of a GC is the column duly packed or capillary in which the separation of constituents is materialized. The packed-column is usually a tubing having an internal diameter of 4.0 mm and made up of stainless-steel, copper, cupronickel or glass either bent in U-shape or coiled. Its length varies from 120 cm to 150 M. [Pg.437]

In our experiments as an experimental set-up an aluminium multi-channel panel was chosen. The main parameters of flat aluminium heat pipe panel, developed in the Luikov Institute are HPP width -70mm, HPP height - 7 mm, HPP length - 700 mm, evaporator length - 98 mm, condenser length - 500 mm, mass- 0, 43 kg. Propane was applied to fill the HPP and it is interesting as a working fluid with the point of view of its compatibility with all heat pipe envelopes and wick materials (aluminium, steel, stainless steel, copper, AL2 O3, etc). [Pg.649]

Columns are usually made of metal (stainless steel, copper, or aluminum) or glass (including the new fused silica OT columns). Inertness is of prime importance, so glass and silica have become increasingly popular, but... [Pg.65]

The ferrous sulfide him is not continuous and the base iron can corrode. Hydrogen sulfide can also be produced. The SRB have been identified to contribute to the corrosion of stainless steels, copper and aluminum alloys. (Dexter)14... [Pg.386]


See other pages where Stainless steels copper is mentioned: [Pg.513]    [Pg.130]    [Pg.296]    [Pg.266]    [Pg.270]    [Pg.271]    [Pg.931]    [Pg.894]    [Pg.744]    [Pg.1037]    [Pg.407]    [Pg.188]    [Pg.193]    [Pg.266]    [Pg.270]    [Pg.271]    [Pg.200]    [Pg.175]    [Pg.129]    [Pg.513]    [Pg.185]    [Pg.444]    [Pg.316]    [Pg.218]   
See also in sourсe #XX -- [ Pg.585 ]




SEARCH



Copper steels

© 2024 chempedia.info