Specimen size, glass transition temperature

Glass Transition Temperature The glass transition temperatures were measured on a Perkin-Elmer Differential Scanning Calorimeter, DSC-2. Measurements were carried out from -120°C to +60oC under helium at a scanning rate of lO C per min. Specimen sizes were on the order of 20 mg. 

Thermomechanical Analysis (TMA) measures unidirectional dimensional changes in materials as functions of time, temperature and applied force. The TMA measurements are coefficient of linear thermal expansion (CLTE), glass transition temperatures (Tg) and softening points (Ts). Newer applications of TMA include elasticity, melt viscosity, and heat deflection temperature. In addition to traditional TMA instruments, many modem dynamic mechanical thermal analysis (DMTA) instruments can operate in a TMA (static force) mode. The main differences between the two types of instruments are the size of the specimens and the materials used to fabricate the measurement fixtures (stage, probe, clamps, etc.). Most TMA instruments use quartz, while DMTA instruments use larger steel components. The specimens used in these experiments are... 

Numerous studies have been made of the mechanical properties of fibrous composites these include recently published papers on impact properties by Izod (1,2, 3,4) and Charpy (5,6) and drop weight (7) tests. We reported the Charpy impact fracture behavior of various glass-polyester composites regarding the effects of temperature (8,9,10), specimen size (8), and fiber orientation (10). This paper describes the effects of the tough-brittle transition in the impact behavior of glass-polyester composites which occurs with a variation of temperature and specimen size. 

---