Solubility various solvents

The products are Hquids, soluble in various solvents and stable over prolonged periods. Monochloroborane is an equiUbtium mixture containing small amounts of borane and dichloroborane complexes with dimethyl sulfide (81). Monobromoborane—dimethyl sulfide complex shows high purity (82,83). Solutions of monochloroborane in tetrahydrofuran and diethyl ether can also be prepared. Strong complexation renders hydroboration with monochloroborane in tetrahydrofuran sluggish and inconvenient. Monochloroborane solutions in less complexing diethyl ether, an equiUbtium with small amounts of borane and dichloroborane, show excellent reactivity (88,89). Monochloroborane—diethyl etherate [36594-41-9] (10) may be represented as H2BCI O... 

Another approach to processible bismaleimide resins via a Michael addition chain extension, is the reaction of bismaleimide, or alow melting mixture of bismaleimides, with aminobenzoic hydrazide to provide a resin that is soluble in various solvents, such as acetone [67-64-1methylene chloride [75-09-2] and dimethylform amide [68-12-2] (33). The idealized chemical stmcture for a 2 1 BMI—aminobenzoic hydrazide resin is as follows ... 

Solubility parameters and liquid molar volumes for various solvents and polymers (25°C)... 

Petroleum products may be treated with various solvents for the removal by selective solubility of undesirable constituents or for the recovery of by-products. The solvent and solute must be separated to yield the desired product and to recover the solvent for reuse. The solvents normally boil at a lower temperature than the products from which they are to be removed and so are generally distilled off as overhead products. The pipe stills used for this service may be single-stage or multi-stage units, depending on the service involved. Some solvents can be removed by the use of steam heated stills. In other cases, the high temperature required necessitates the use of fired heaters and vacuum towers. 

More recently considered candidates are large molecular anions with delocalized anionic charge, which offer low lattice energies, relatively small ion-ion interaction, and hence sufficient solubility and relatively large conductivity. Delocalization of the charge is achieved by electron-with drawing substituents such as -F or - CF3. Furthermore, these anions show a good electrochemical stability to oxidation. In contrast to Lewis acid-based salts they are chemically more stable with various solvents and often also show excellent thermal stability. 

The chelatoborates LiB(C6H4 xFt 02)2 (x = 0, 1,4) are sufficiently soluble in various solvents and yield chemically stable solutions. Figure 14 shows the results of conductivity measurements at concentrations of about 1 mol L 1 in DME solvent, showing that a conductivity increase of about 440 percent at 35 °C and of about 240 percent at -45°C can be obtained with increasing fluorination of the salt. 

The solubility of TNPht in grams per lOQg of various solvents was detd by Desvergnes (Ref 4, pp 255-6), and are given below in rounded figures ... 

E6.7 Bronsted measured the solubility of solid orthorhombic and monoclinic sulfur at 298.15 K in various solvents (benzene, diethyl ether and ethanol). He found that the solubility of monoclinic sulfur is always 1.28 times that of orthorhombic sulfur. That is, the concentration of sulfur in the solution in equilibrium with monoclinic sulfur is always 1.28 times the concentration of sulfur in the solution in equilibrium with orthorhombic sulfur. Sulfur exists in these solvents exclusively in the form of Sg molecules. 

The most convenient and successful synthetic preparation of octa-chlorodibenzo-p-dioxin has been described by Kulka (13). The procedure involves chlorination of pentachlorophenol in refluxing trichlorobenzene to give octachlorodibenzo-p-dioxin in 80% yield. Kulka has explained the reaction as coupling between two pentachlorophenoxy radicals. Large amounts (5—15%) of heptachlorodibenzo-p-dioxin were observed in the unpurified product. Since the pentachlorophenol used in this study contained 0.07% tetrachlorophenol, we feel that tetrachloro-phenol may be produced in situ (Reaction 4). Such a scheme would be analogous to the formation of 2,4-dichlorophenol and 3-chlorophenol produced from 2,4,4 -trichloro-2 -hydroxydiphenyl ether (Reaction 2). The solubility of octachlorodibenzo-p-dioxin was determined in various solvents data are presented in Table II. 

Vinyl acetate Free radical polymerization similar to the above —CH2—CH— 1 OCOCHs 30 Amorphous, even when stretched. Soluble in various solvents... 

Our approach for chiral resolution is quite systematic. Instead of randomly screening different chiral acids with racemic 7, optically pure N-pMB 19 was prepared from 2, provided to us from Medicinal Chemistry. With 19, several salts with both enantiomers of chiral acids were prepared for evaluation of their crystallinity and solubility in various solvent systems. This is a more systematic way to discover an efficient classical resolution. First, a (+)-camphorsulfonic acid salt of 19 crystallized from EtOAc. One month later, a diastereomeric (-)-camphorsulfonic acid salt of 19 also crystallized. After several investigations on the two diastereomeric crystalline salts, it was determined that racemic 7 could be resolved nicely with (+)-camphorsulfonic acid from n-BuOAc kinetically. In practice, by heating racemic 7 with 1.3equiv (+)-camphorsulfonic acid in n-BuOAc under reflux for 30 min then slowly cooling to room temperature, a cmde diastereomeric mixture of the salt (59% ee) was obtained as a first crop. The first crop was recrystallized from n-BuOAc providing 95% ee salt 20 in 43% isolated yield. (The optical purity was further improved to -100% ee by additional recrystallization from n-BuOAc and the overall crystallization yield was 41%). This chiral resolution method was more efficient and economical than the original bis-camphanyl amide method. 

The classic definition of asphaltenes is based on the solution properties of petroleum residua in various solvents. The word asphaltene was coined in France by J.B. Boussingault in 1837. Boussingault described the constituents of some bitumens (asphalts) found at that time in eastern France and in Peru. He named the alcohol insoluble, essence of turpentine soluble solid obtained from the distillation residue "asphaltene", since it resembled the original asphalt. 

Conversion of coal to benzene or hexane soluble form has been shown to consist of a series of very fast reactions followed by slower reactions (2 3). The fast initial reactions have been proposed to involve only the thermal disruption of the coal structure to produce free radical fragments. Solvents which are present interact with these fragments to stabilize them through hydrogen donation. In fact, Wiser showed that there exists a strong similarity between coal pyrolysis and liquefaction (5). Recent studies by Petrakis have shown that suspensions of coals in various solvents when heated to 450°C produce large quantities of free radicals (. 1 molar solutions ) even when subsequently measured at room temperature. The radical concentration was significantly lower in H-donor solvents (Tetralin) then in non-donor solvents (naphthalene) (6). 

Sample preparation was carried out with various solvents, depending on the solubility of the sample sometimes gentle warming was necessary. Whereas mostly tetrahydrofuran (THF) in addition to methanol, ethanol and water were used for polar substances, cyclohexane and toluene proved suitable for nonpolar waxes and free fatty acids. 

Hiller and Funke extensively investigated the change of the polymer structure as a function of the monomer and the initiator concentration in various solvents [231]. The content of pendant vinyl groups in the polymer was about 100% for n-BuLi concentrations below 2 mol % and for the whole range of the monomer concentration studied (20-100 g/1). The content of pendant groups decreased when the n-BuLi concentration increased and approached 80% in the transition region of a soluble polymer to a macrogel. As seen in Fig. 45, the decrease of pen-... 

Solubilities of halcinonide were determined in various solvents.29 Results are reported using the U.S.P. 

---