Solids, processes involving synthesis

Intermetallics also represent an ideal system for study of shock-induced solid state chemical synthesis processes. The materials are technologically important such that a large body of literature on their properties is available. Aluminides are a well known class of intermetallics, and nickel aluminides are of particular interest. Reactants of nickel and aluminum give a mixture with powders of significantly different shock impedances, which should lead to large differential particle velocities at constant pressure. Such localized motion should act to mix the reactants. The mixture also involves a low shock viscosity, deformable material, aluminum, with a harder, high shock viscosity material, nickel, which will not flow as well as the aluminum. 

Other microwave-assisted parallel processes, for example those involving solid-phase organic synthesis, are discussed in Section 7.1. In the majority of the cases described so far, domestic multimode microwave ovens were used as heating devices, without utilizing specialized reactor equipment. Since reactions in household multimode ovens are notoriously difficult to reproduce due to the lack of temperature and pressure control, pulsed irradiation, uneven electromagnetic field distribution, and the unpredictable formation of hotspots (Section 3.2), in most contemporary published methods dedicated commercially available multimode reactor systems for parallel processing are used. These multivessel rotor systems are described in detail in Section 3.4. 

Ketcha and Wilson reported the solid-phase version of the classic Nenitzescu indole synthesis in a process involving initial acetoacetylation of ArgoPore-NH2 resin with diketene to afford a polymer bound acetoacetamide <00TL6253>. Formation of the corresponding enaminone 102 via condensation with primary amines in the presence of trimethylorthoformate followed by addition of 1,4-benzoquinones 103 leads to formation of polymer bound 5-hydroxyindole-3-carboxamides 104 which could be cleaved from the resin using TFA yielding the indoles 105. 

Esterification is the first step in PET synthesis but also occurs during melt-phase polycondensation, SSP, and extrusion processes due to the significant formation of carboxyl end groups by polymer degradation. As an equilibrium reaction, esterification is always accompanied by the reverse reaction being hydrolysis. In industrial esterification reactors, esterification and transesterification proceed simultaneously, and thus a complex reaction scheme with parallel and serial equilibrium reactions has to be considered. In addition, the esterification process involves three phases, i.e. solid TPA, a homogeneous liquid phase and the gas phase. The respective phase equilibria will be discussed below in Section 3.1. 

It should be highlighted that in some cases the distinction between a traditional solid-phase synthesis and a process involving solid-supported reagents is often difficult. The reader is advised to refer also to the chapter on the integration of microwave-assisted synthesis with solid supported reagents and scavengers (Chapter 6). 

Although the electrochemical method is old, the processes involved in the synthesis of various solids are... 

Several different processes have been proposed for the conversion of solid organic wastes to a more usable liquid or gaseous form to be utilized as fuel or petrochemical feedstocks. Principally the commonly discussed processes involve the biological conversion to alcohols, the catalytic chemical conversion to methanol or Fischer-Tropsch liquids via a carbon monoxide and hydrogen synthesis gas, or the thermochemical formation of gases or oxygenated liquids by pyrolysis. Pyrolysis is defined as the decomposition of organic material at elevated temperatures. The process to be described uses a very special case of pyrolysis. 

As the drug discovery process proceeds from early lead discovery through lead optimization and toward candidate selection, the level of purity required of each compound increases. Late-stage compounds may be tested in multiple assays, many of which may involve animal models and may be labor-intensive. Even the best solid phase combinatorial synthesis methods cannot assure that... 

Various catalysts have been studied for these reaction processes. The major disadvantages of these reaction processes are (i) the need for an energy intensive separation step for catalyst recovery and (ii) limiting solubility of CO and O2 in the liquid reactant medium. One of the objectives of our study is to develop a heterogeneous gas-solid catalytic reaction process for the synthesis of methyl-N-phenylcarbamate involving step 3 and dimethyl carbonate involving step 4 over Cu-based catalyst. This gas-solid process would eliminate the solubility limitation and catalyst separation step, thus enhancing the overall economics of the carbamate synthesis (6-8). 

---