Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Solid state condensation reaction

Solid-state condensation reactions of secondary amines are not yet well developed. However, an interesting condensation of the pyrazolidinone (336) with aromatic aldehydes 77 gives a quantitative access to the azomethinimines 337 by cogrinding and heating to 80 °C [103] (Scheme 53). [Pg.157]

X.L. li, H. Ma, Y.M. Wang, JA4. Meng, Studies on solid state condensation reaction of aromatic aldehydes and 3-methyl-l-phenyl-5-pyrazolone, Chem. J. Chin. Univ. 16 (1995) 1903-1906. [Pg.599]

Traditionally one categorizes matter by phases such as gases, liquids and solids. Chemistry is usually concerned with matter m the gas and liquid phases, whereas physics is concerned with the solid phase. However, this distinction is not well defined often chemists are concerned with the solid state and reactions between solid-state phases, and physicists often study atoms and molecular systems in the gas phase. The tenn condensed phases usually encompasses both the liquid state and the solid state, but not the gas state. In this section, the emphasis will be placed on the solid state with a brief discussion of liquids. [Pg.86]

A unique characteristic of polyesters is their ability to undergo additional condensation reactions during processing or when in the solid state. These reactions redistribute the molecular weight of the polymer until a dynamic equilibrium is established. Water, when present at high temperatures in polyester melts, can depolymerize polyesters via a hydrolysis reaction. For this reason, manufacturers must carefully dry the polymer before processing. [Pg.373]

Experimental determination of Ay for a reaction requires the rate constant k to be determined at different pressures, k is obtained as a fit parameter by the reproduction of the experimental kinetic data with a suitable model. The data are the concentration of the reactants or of the products, or any other coordinate representing their concentration, as a function of time. The choice of a kinetic model for a solid-state chemical reaction is not trivial because many steps, having comparable rates, may be involved in making the kinetic law the superposition of the kinetics of all the different, and often unknown, processes. The evolution of the reaction should be analyzed considering all the fundamental aspects of condensed phase reactions and, in particular, beside the strictly chemical transformations, also the diffusion (transport of matter to and from the reaction center) and the nucleation processes. [Pg.153]

These materials have been prepared by polymerisation of p-halothiophenoxide metal compounds both in the solid state and in solution. They have also been prepared by condensation of p-dichlorobenzene with elemental sulphur in the presence of sodium carbonate while the commercial polymers are said to be produced by the reaction of p-dichlorobenzene with sodium sulphide in a polar solvent. [Pg.593]

The strategy of Kaeriyama represents a so-called precursor route and was developed to overcome the characteristic shortcomings (insolubility, lack of process-ability) of previous PPP syntheses. The condensation reaction is carried out with solubilized monomers, leading to a soluble polymeric intermediate. In the final reaction step this intermediate is then converted, preferentially in the solid state allowing the formation of homogeneous PPP films or layers, into PPP (or other poly(arylene)s). [Pg.33]

At moderately high molecular weights, the reaction mass becomes highly viscous, which limits heat transfer and evaporation of the condensation water. This high viscosity limits further melt polymerization in the bulk. In the literature, the melt polymerization stage is sometimes omitted and the prepolymers are condensed to high molecular weights in the solid state.6,28 41 The polymerizations can easily be carried out without a catalyst. [Pg.165]

Fourier transform infrared (FTIR) spectroscopy is the most popular method for determining the imidization process in the solid state and identifying specific substituents on the macromolecular backbone (e.g., CN, SO3H, CO, SO2).131 A method for calculating the diermal imidization extent based on FTIR data has been reported by Pride.132 Raman spectroscopy was used on the model study of PMDA-ODA condensation, and the possible formation of an inline bond by reaction of an amino group with an imide carboxyle was evidenced.133... [Pg.300]

Table 6 Stobbe condensation reaction of 22 and 23 in the solid state... Table 6 Stobbe condensation reaction of 22 and 23 in the solid state...

See other pages where Solid state condensation reaction is mentioned: [Pg.375]    [Pg.893]    [Pg.357]    [Pg.375]    [Pg.893]    [Pg.357]    [Pg.74]    [Pg.374]    [Pg.377]    [Pg.161]    [Pg.342]    [Pg.157]    [Pg.349]    [Pg.417]    [Pg.279]    [Pg.417]    [Pg.338]    [Pg.356]    [Pg.584]    [Pg.883]    [Pg.912]    [Pg.98]    [Pg.99]    [Pg.164]    [Pg.174]    [Pg.236]    [Pg.237]    [Pg.176]    [Pg.188]    [Pg.191]    [Pg.6]    [Pg.235]    [Pg.351]    [Pg.3]    [Pg.378]    [Pg.463]    [Pg.152]   
See also in sourсe #XX -- [ Pg.357 ]

See also in sourсe #XX -- [ Pg.357 ]




SEARCH



Condensed states

Solid state reactions

© 2024 chempedia.info