Sodium olefins

Cationic surfactant cetyl pyridinium chloride. Anionic sodium olefin dodecylbenzene sulphonate. Non-ionic octylphenyl polyoxyethylate surfactant. From [284]. 

A -Bromosuccinimide (prepared by the action of bromine on succinimide at o in the presence of sodium hydroxide) is a valuable specific reagent for brominating olefines in the a-methylene position to the double bond without simultaneously adding bromine to this bond. For example, if A -bromosuccini-mide is represented by (C4H40t)NBr —... 

Certain features of the addition of acetyl nitrate to olefins in acetic anhydride may be relevant to the mechanism of aromatic nitration by this reagent. The rapid reaction results in predominantly cw-addition to yield a mixture of the y -nitro-acetate and y5-nitro-nitrate. The reaction was facilitated by the addition of sulphuric acid, in which case the 3rield of / -nitro-nitrate was reduced, whereas the addition of sodium nitrate favoured the formation of this compound over that of the acetate. As already mentioned ( 5.3. i), a solution of nitric acid (c. i 6 mol 1 ) in acetic anhydride prepared at — 10 °C would yield 95-97 % of the nitric acid by precipitation with urea, whereas from a similar solution prepared at 20-25 °C and cooled rapidly to —10 °C only 30% of the acid could be recovered. The difference between these values was attributed to the formation of acetyl nitrate. A solution prepared at room... 

If alkyl groups are attached to the ylide carbon atom, cis-olefins are formed at low temperatures with stereoselectivity up to 98Vo. Sodium bis(trimethylsilyl)amide is a recommended base for this purpose. Electron withdrawing groups at the ylide carbon atom give rise to trans-stereoselectivity. If the carbon atom is connected with a polyene, mixtures of cis- and rrans-alkenes are formed. The trans-olefin is also stereoseiectively produced when phosphonate diester a-carbanions are used, because the elimination of a phosphate ester anion is slow (W.S. Wadsworth, 1977). 

Cis-olefins or cis./rjns-dienes can be obtained from alkynes in similar reaction sequences. The alkyne is first hydroborated and then treated with alkaline iodine. If the other substituents on boron are alkyl groups, a cis-olefin is formed (G. Zweifel, 1967). If they are cir-alkenyls, a cis, trans-diene results. The reactions are thought to be iodine-assisted migrations of the cis-alkenyl group followed by (rans-deiodoboronation (G. Zweifel, 1968). Trans, trans-dienes are made from haloalkynes and alkynes. These compounds are added one after the other to thexylborane. The alkenyl(l-haloalkenyl)thexylboranes are converted with sodium methoxide into trans, trans-dienes (E. Negishi, 1973). The thexyl group does not migrate. 

The less hindered f/ans-olefins may be obtained by reduction with lithium or sodium metal in liquid ammonia or amine solvents (Birch reduction). This reagent, however, attacks most polar functional groups (except for carboxylic acids R.E.A. Dear, 1963 J. Fried, 1968), and their protection is necessary (see section 2.6). 

Chloroacetate esters are usually made by removing water from a mixture of chloroacetic acid and the corresponding alcohol. Reaction of alcohol with chloroacetyl chloride is an anhydrous process which Hberates HCl. Chloroacetic acid will react with olefins in the presence of a catalyst to yield chloroacetate esters. Dichloroacetic and trichloroacetic acid esters are also known. These esters are usehil in synthesis. They are more reactive than the parent acids. Ethyl chloroacetate can be converted to sodium fluoroacetate by reaction with potassium fluoride (see Fluorine compounds, organic). Both methyl and ethyl chloroacetate are used as agricultural and pharmaceutical intermediates, specialty solvents, flavors, and fragrances. Methyl chloroacetate and P ionone undergo a Dar2ens reaction to form an intermediate in the synthesis of Vitamin A. Reaction of methyl chloroacetate with ammonia produces chloroacetamide [79-07-2] C2H ClNO (53). 

In the manufacture of 2-naphthalenol, 2-naphthalenesulfonic acid must be converted to its sodium salt this can be done by adding sodium chloride to the acid, and by neutralizing with aqueous sodium hydroxide or neutralizing with the sodium sulfite by-product obtained in the caustic fusion of the sulfonate. The cmde sulfonation product, without isolation or purification of 2-naphthalenesulfonic acid, is used to make 1,6-, 2,6-, and 2,7-naphthalenedisulfonic acids and 1,3,6-naphthalenetrisulfonic acid by further sulfonation. By nitration, 5- and 8-nitro-2-naphthalenesulfonic acids, [89-69-1] and [117-41-9] respectively, are obtained, which are intermediates for Cleve s acid. All are dye intermediates. The cmde sulfonation product can be condensed with formaldehyde or alcohols or olefins to make valuable wetting, dispersing, and tanning agents. 

All lnaphthalenesulfonic Acids. The aLkyLnaphthalenesulfonic acids can be made by sulfonation of aLkyLnaphthalenes, eg, with sulfuric acid at 160°C, or by alkylation of naphthalenesulfonic acids with alcohols or olefins. These products, as the acids or their sodium salts, are commercially important as textile auxiUaries, surfactants (qv), wetting agents, dispersants (qv), and emulsifying aids, eg, for dyes (qv), wettable powder pesticides, tars, clays (qv), and hydrotropes. 

In the examples, a nitro group is substituted for a hydrogen atom, and water is a by-product. Nitro groups may, however, be substituted for other atoms or groups of atoms. In Victor Meyer reactions which use silver nitrite, the nitro group replaces a hahde atom, eg, I or Br. In a modification of this method, sodium nitrite dissolved in dimethyl formamide or other suitable solvent is used instead of silver nitrite (1). Nitro compounds can also be produced by addition reactions, eg, the reaction of nitric acid or nitrogen dioxide with unsaturated compounds such as olefins or acetylenes. 

Primary nitroparaffins react with two moles of formaldehyde and two moles of amines to yield 2-nitro-l,3-propanediamines. With excess formaldehyde, Mannich bases from primary nitroparaffins and primary amines can react further to give nitro-substituted cycHc derivatives, such as tetrahydro-l,3-oxa2iaes or hexahydropyrimidines (38,39). Pyrolysis of salts of Mannich bases, particularly of the boron trifluoride complex (40), yields nitro olefins by loss of the amine moiety. Closely related to the Mannich reaction is the formation of sodium 2-nitrobutane-1-sulfonate [76794-27-9] by warming 1-nitropropane with formaldehyde and sodium sulfite (41). 

Methyl-l-Pen ten e. This olefin is produced commercially by dimeriza tion of propylene in the presence of potassium-based catalysts at 150—160°C and - 10 MPa. Commercial processes utilize several catalysts, such as sodium-promoted potassium carbonate and sodium- and alurninum-promoted potassium hydroxide (12—14) in a fixed-bed reactor. The reaction produces a mixture of C olefins containing 80—85% of 4-methyl- 1-pentene. 

Sulfation and Sulfonation. a-Olefin reactions involving the introduction of sulfur-containing functional groups have commercial importance. As with many derivatives of olefins, several of these products have appHcations in the area of surfactants (qv) and detergents. Typical sulfur reagents utilized in these processes include sulfuric acid, oleum, chlorosulfonic acid, sulfur trioxide, and sodium bisulfite. 

The solvent is 28 CC-olefins recycled from the fractionation section. Effluent from the reactors includes product a-olefins, unreacted ethylene, aluminum alkyls of the same carbon number distribution as the product olefins, and polymer. The effluent is flashed to remove ethylene, filtered to remove polyethylene, and treated to reduce the aluminum alkyls in the stream. In the original plant operation, these aluminum alkyls were not removed, resulting in the formation of paraffins (- 1.4%) when the reactor effluent was treated with caustic to kill the catalyst. In the new plant, however, it is likely that these aluminum alkyls are transalkylated with ethylene by adding a catalyst such as 60 ppm of a nickel compound, eg, nickel octanoate (6). The new plant contains a caustic wash section and the product olefins still contain some paraffins ( 0.5%). After treatment with caustic, cmde olefins are sent to a water wash to remove sodium and aluminum salts. 

Arsenic Peroxides. Arsenic peroxides have not been isolated however, elemental arsenic, and a great variety of arsenic compounds, have been found to be effective catalysts ia the epoxidation of olefins by aqueous hydrogen peroxide. Transient peroxoarsenic compounds are beheved to be iavolved ia these systems. Compounds that act as effective epoxidation catalysts iaclude arsenic trioxide, arsenic pentoxide, arsenious acid, arsenic acid, arsenic trichloride, arsenic oxychloride, triphenyl arsiae, phenylarsonic acid, and the arsenates of sodium, ammonium, and bismuth (56). To avoid having to dispose of the toxic residues of these reactions, the arsenic can be immobi1i2ed on a polystyrene resia (57). 

Reaction conditions depend on the reactants and usually involve acid or base catalysis. Examples of X include sulfate, acid sulfate, alkane- or arenesulfonate, chloride, bromide, hydroxyl, alkoxide, perchlorate, etc. RX can also be an alkyl orthoformate or alkyl carboxylate. The reaction of cycHc alkylating agents, eg, epoxides and a2iridines, with sodium or potassium salts of alkyl hydroperoxides also promotes formation of dialkyl peroxides (44,66). Olefinic alkylating agents include acycHc and cycHc olefinic hydrocarbons, vinyl and isopropenyl ethers, enamines, A[-vinylamides, vinyl sulfonates, divinyl sulfone, and a, P-unsaturated compounds, eg, methyl acrylate, mesityl oxide, acrylamide, and acrylonitrile (44,66). 

With mercuric acetate (Hg(OOCCH2)2), olefins and / fZ-butyl hydroperoxide form organomercury-containing peroxides (66,100). The organomercury compound can be treated with bromine or a mild reducing agent, such as sodium borohydride, to remove the mercury. 

---