Sodium acetamide alcoholate

The organic phase is dried over sodium sulfate, filtered, the dichloroethane is evaporated off and the residue is crystallized from ethyl alcohol (95%). The product is dried in the oven and there is thus obtained about 800 grams (yield 90%) of the N-(2,5-diethoxyphenyl)-4-butoxy phenoxy acetamide, MP 101°C. 

Acid (0.78 M), neutralized to 25% Pt-anode, 0.25 A/cm Alcohol, ester, ether and acetamide according to solvent Sodium salt Tetrabutylammonium-salt... 

Nitric acid. Sulfuric acid, N-Methylhydroxy acetamide Phosphorus oxytrichloride. Benzene, Neopentyl glycol. Pyridine, Petroleum ether. Ammonium fluoride Thiophosphorus trichloride. Benzene, Neopentyl glycol. Pyridine, Petroleum ether. Ammonium fluoride Nitric acid. Sulfuric acid. Glycerol, Magnesium sulfate Anhydrous hydrazine. Cyanogen bromide. Isopropyl alcohol. Sodium nitrite. Sodium bicarbonate. Copper nitrate trihydrate. Nitric acid. Diethyl ether... 

Condensation, of paraldehyde with diethyl malonate, 32, 54 of a-phene thyl chloride with diphenylacetonitrile, 39, 74 of phenylacetylene with ethyl orthoformate, 39, 59 of 1-phenylbiguanide with ethyl chloroacetate, 38,1 of potassium diphenylacetonitrile with benzyl chloride, 39, 73 of potassium trithiocarbonate with potassium chloroacetate, 39, 77 of sodium acetylacetonate to tetraacetylethane, 39, 61 of sodium formylacetone with cyano-acetamide, 32, 32 of tetracyanoethylene with N,N-dimethylaniline, 39, 68 of thiophene, paraldehyde, and hydrogen chloride, 38, 86 of thiourea with furfuryl alcohol, 36,66... 

The lactams 2-pyrrolidinone and lV-methyl-2-pyrrolidinone may be used to increase the solubility of carbohydrates in alcoholic reaction media. However, they cannot be used in the preparation of metal halide adducts, because of their tendency to associate, perhaps by complexing, with metal halide adducts.1 Amides are known to form complexes with metal halides. For example, sodium iodide combines with N, N-dimethylformamide to give Nal 3 N,N-dimethylformamide. Acetamide can form NaBr 2 acetamide and NaI-2 acetamide. 7... 

Azoxybenzene has been prepared by reduction of nitrobenzene with alcoholic potassium hydroxide,1 with sodium amalgam,2 with hydrogen in the presence of lead oxide,3 with methyl alcohol and sodium hydroxide,4 with sodium methylate and methyl alcohol,5 and by electrolytic reduction 6 by oxidation of azobenzene with chromic anhydride 7 by treatment of /9-phenylhydroxylamine with alkaline potassium permanganate,8 with nitrobenzene,9 with mineral adds,10 and with mercury acetamide,11 and by oxidation of aniline with hydrogen peroxide,12 and with acid permanganate solution in the presence of formaldehyde.13 The procedure described above is a slight modification of one described in the literature.14... 

The o-t-butyl-a-phenylbenzyl alcohol and N,N-dimethylmonochloroacetamide are dissolved in anhydrous diethyl ether. Portionwise 50% sodium hydride in the form of an oily suspension is added to the solution with stirring. After all the sodium hydride is added, the mixture is stirred at room temperature for another 3 h and then water is added to decompose excess sodium hydride. The ethereal layer is separated, dried with sodium sulfate, filtered and concentrated by removal of the solvent. The residue crystallizes upon addition of petroleum ether (boiling range 80-100°C) to which some diethyl ether is added. There is obtained 2-[o-t-butyl-a-phenylbenzyl)oxy]-N,N-dimethyl acetamide, melting point 90-91°C (81% yield). 

The carboxylic acid 61 was converted to its aldehyde counterpart which, upon condensation with m-terf-butyldimethylsilyloxyphenyl-magnesium bromide, gave the alcohol 62. Conversion of the alcohol to the acetamide 63 was effected by a one-pot tosylation/sodium azide displacement, followed by hydrogenation (H2/Pd(C)/Florisil) and acetylation. Treatment of 63 by thallium(III) trifluoroacetate (TTFA)... 

The isothiocyanates are transformed into thiocarbamates by reaction with alcohols or into the acetamides by reaction with acetic acid or anhydride and sodium acetate. These transformations have also been applied to the preparation of unsaturated aminosugars73,74. Thus, suprafa-cial rearrangement of ethyl 2.3,4-trideoxy-6-0-methanesulfonyl-4-thiocyan ato-a-D-t/ireo-hex-2-enopyranoside to the 2-isothiocyanatc occurs in refluxing toluene (1 h), whereas the erythro-epimer needs to be heated in dimethylformamide for 6 hours73. This difference in reactivity might be due to an unfavorable anomeric effect and C-6 in an axial orientation in the transition state of the errr/iro-epimer, respectively. 

A -substituted 2-oxazolidinones (194) are the products of reaction of trifluoroacetamide sodium salts with terminal epoxides or a-hydroxy tosylates (Scheme 97) <92TL377>. When the nitrogen is unsubstituted, the reaction stops before cyclization, presumably because the acetamide N—H is more acidic than the hydroxy group. Tosylation of iV-Boc derivatives of )S-amino alcohols furnishes... 

The reaction of (f /Z)-4-arylidenepyrazol-3-ones 491a-c with reactive methylene compounds such as diethyl or dimethyl malonate, ethyl cyanoacetate or cyano-acetamide in alcoholic solution containing sodium hydroxide afforded the corresponding addition products 492c-j. These adducts were found to be almost exclusively enol tautomers (79AP478) (Scheme 151). 

---