Size surface-density

The data from Table 2 show that the algorithm developed in allows sizing of different cracks with complex cross-sections and unknown shapes for orientation angles not exceeding 45°. It is seen that the width 2a and the parameter c (or the surface density of charge m=4 r // e at the crack walls) are determined with 100% accuracy for all of the Case Symbols studied. The errors in the computation of the depths dj and di are less than 4% while the errors in the computation of d, dj, d, and d are less than 20% independent of the shape of the investigated crack and its orientation angle O <45°. 

The most commonly measured pigment properties ate elemental analysis, impurity content, crystal stmcture, particle size and shape, particle size distribution, density, and surface area. These parameters are measured so that pigments producers can better control production, and set up meaningful physical and chemical pigments specifications. Measurements of these properties ate not specific only to pigments. The techniques appHed are commonly used to characterize powders and soHd materials and the measutiag methods have been standardized ia various iadustries. 

Properties Affecting Solids Mixing Wide differences among properties such as particle-size distribution, density, shape, and surface characteristics (such as elec trostatic charge) may m e blending very difficult. In fact, the properties of the ingredients dominate the mixing operation. The most commonly observed characteristics of solids are as follows ... 

At X-ray fluorescence analysis (XRF) of samples of the limited weight is perspective to prepare for specimens as polymeric films on a basis of methylcellulose [1]. By the example of definition of heavy metals in film specimens have studied dependence of intensity of X-ray radiation from their chemical compound, surface density (P ) and the size (D) particles of the powder introduced to polymer. Have theoretically established, that the basic source of an error of results XRF is dependence of intensity (F) analytical lines of determined elements from a specimen. Thus the best account of variations P provides a method of the internal standard at change P from 2 up to 6 mg/sm the coefficient of variation describing an error of definition Mo, Zn, Cu, Co, Fe and Mn in a method of the direct external standard, reaches 40 %, and at use of a method of the internal standard (an element of comparison Ga) value does not exceed 2,2 %. Experiment within the limits of a casual error (V changes from 2,9 up to 7,4 %) has confirmed theoretical conclusions. 

Fig. 7. Data of Parsonage et al. [77] on the adsorption of a series of block copolymers of polystyrene-poly-2-vinylpyridine. The ordinate is the measured surface density ( d 2) reduced by the density required for the nonadsorbing chains to overlap the abscissa is the solvent-enhanced size asymmetry of the block copolymer defined under Eq. 26. The form of this plot is that suggested by Eq. 28...

Sample name V content (wt.%) Particle size (nm) BET surface area (nt g- ) VOx surface density (pmol VaOsm )... 

FIGURE 9-1. Lipoprotein structure. Lipoproteins are a diverse group of particles with varying size and density. They contain variable amounts of core cholesterol esters and triglycerides, and have varying numbers and types of surface apolipoproteins. The apolipoproteins function to direct the processing and removal of individual lipoprotein particles. (Reprinted from LipoScience, Inc. with permission.)... 

Size Bulk density (kg/m3) Surface area a (m2/m3) Packing factor Fp m 1... 

Flotation. In many cases, contaminants adsorbed on the surface of clay particles, or contaminants occurring in soil as discriminate particles, have different surface properties to clean soil particles. By adding special chemical substances, the formation of a hydrophobic surface on the contaminated particles is possible. Pulp aeration results in the attachment of hydrophobic contaminated particles to the surface of the small bubbles that are formed. In this way, selective flotation of these particles is achieved. Contrary to the gravimetric separation methods, flotation offers the possibility to separate contaminated and noncontaminated particles of the same grain size and density but with different surface properties. 

It is seen that the diameters of bronchioles (averaged over generations 11 - 15) vary little with age. The increase in bronchial size is greater, but still less than might be expected if airways are simply scaled for overall body dimensions (illustrated by the dashed curves in Figure 9, which are functions of body weight W). Since bronchiolar diameter does not change much with age it is likely that the thickness of bronchiolar epithelium is also relatively constant. However, in the case of the bronchi, it is reasonable to assume that epithelial thickness is proportional to bronchial diameter. Thus, it is necessary to use age dependent conversion factors between the surface density of alpha-decays and dose to cells. 

---