Silyl enol ethers preparation

The silyl enol ether prepared from (-)-menthone is transformed into a mixture of two diastereo-meric optically active cyclopropane derivatives by the diiodomethane/diethylzinc reagent28. 

Some synthetic modification for Pd(II)-catalyzed oxidation of silyl enol ethers is also developed. Silyl enol ethers prepared from aldehydes and ketones are converted to the corresponding a,/3-unsaturated carbonyl compound in good yields by 10 mol % of palladium(II) acetate in the presence of 1 atm pressure of O2 in DMSO as solvent (Scheme... 

Dehydrosilylation of silyl enol ethers prepared from unsymmetrical polyfunctional-ized ketones gives the corresponding acyclic and five-,f f seven-,t t ... 

Enamine and Silyl Enol Ether Preparation. Both enamines and silyl enol ethers are useful intermediates in organic s)fnthe-sis. Aldehydes and ketones can be transformed into enamines via treatment with 2-3 equiv of trimethylsilyldiethylamine in the presence of a trace of / -toluenesulfonic acid. The presence of excess silylamine obviates the normal requirements for water removal by azeotropic distillation or by addition of an insoluble drying agent. No solvent or heating is required for the transformation, and the reaction normally proceeds at room temperature. However, heating the reaction mixture allows enamine synthesis in equally high yield without an acid catalyst. 

The silyl enol ethers 209 and 212 are considered to be sources of carbanions. and their transmetallation with Pd(OAc)2 forms the Pd enolate 210. or o.w-tt-allylpalladium, which undergoes the intramolecular alkene insertion and. 1-elimination to give 3-methylcyclopentenone (211) and a bicyclic system 213[199], Five- and six-membered rings can be prepared by this reaction[200]. Use of benzoquinone makes the reaction catalytic. The reaction has been used for syntheses of skeletons of natural products, such as the phyllocladine intermediate 214[201], capnellene[202], the stemodin intermediate 215[203] and hir-sutene [204]. 

The silyl enol ether 940 is prepared from the Q-bromo ketone 939 by the transmetahation with trimethylsilyltributyjtin[784J. 

Preparation of o,/3-Unsaturated Carbonyl Compounds by the Reactions of Silyl Enol Ethers and Enol Acetates with Ally Carbonates... 

Another preparative method for the enone 554 is the reaction of the enol acetate 553 with allyl methyl carbonate using a bimetallic catalyst of Pd and Tin methoxide[354,358]. The enone formation is competitive with the allylation reaction (see Section 2.4.1). MeCN as a solvent and a low Pd to ligand ratio favor enone formation. Two regioisomeric steroidal dienones, 558 and 559, are prepared regioselectively from the respective dienol acetates 556 and 557 formed from the steroidal a, /3-unsaturated ketone 555. Enone formation from both silyl enol ethers and enol acetates proceeds via 7r-allylpalladium enolates as common intermediates. 

The preparation of silyl enol ethers has been reviewed. 

Although ethereal solutions of methyl lithium may be prepared by the reaction of lithium wire with either methyl iodide or methyl bromide in ether solution, the molar equivalent of lithium iodide or lithium bromide formed in these reactions remains in solution and forms, in part, a complex with the methyllithium. Certain of the ethereal solutions of methyl 1ithium currently marketed by several suppliers including Alfa Products, Morton/Thiokol, Inc., Aldrich Chemical Company, and Lithium Corporation of America, Inc., have been prepared from methyl bromide and contain a full molar equivalent of lithium bromide. In several applications such as the use of methyllithium to prepare lithium dimethyl cuprate or the use of methyllithium in 1,2-dimethyoxyethane to prepare lithium enolates from enol acetates or triraethyl silyl enol ethers, the presence of this lithium salt interferes with the titration and use of methyllithium. There is also evidence which indicates that the stereochemistry observed during addition of methyllithium to carbonyl compounds may be influenced significantly by the presence of a lithium salt in the reaction solution. For these reasons it is often desirable to have ethereal solutions... 

Silylated cyanohydrins have also been prepared via silylation of cyanohydrins themselves and by the addition of hydrogen cyanide to silyl enol ethers. Silylated cyanohydrins have proved to be quite useful in a variety of synthetic transformations, including the regiospecific protection of p-quinones, as intermediates in an efficient synthesis of a-aminomethyl alcohols, and for the preparation of ketone cyanohydrins themselves.The silylated cyanohydrins of heteroaromatic aldehydes have found extensive use as... 

The in situ cyanosilylation of p-an1saldehyde is only one example of the reaction which can be applied to aldehydes and ketones in general. - The simplicity of this one-pot procedure coupled with the use of inexpensive reagents are important advantages over previous methods. The silylated cyanohydrins shown in the Table were prepared under conditions similar to those described here. Enolizable ketones and aldehydes have a tendency to produce silyl enol ethers as by-products in addition to the desired cyanohydrins. The... 

Selective fluonnation in polar solvents has proved commercially successful in the synthesis of 5 fluorouracil and its pyrimidine relatives, an extensive subject that will be discussed in another section Selective fluonnation of enolates [47], enols [48], and silyl enol ethers [49] resulted in preparation of a/phn-fluoro ketones, fieto-diketones, heta-ketoesters, and aldehydes The reactions of fluorine with these functionalities is most probably an addition to the ene followed by elimination of fluonde ion or hydrogen fluoride rather than a simple substitution In a similar vein, selective fluonnation of pyridmes to give 2-fluoropyridines was shown to proceed through pyridine difluondes [50]... 

Silyl enol ethers are fluonnated in high yields with xenon difluoride [62 93, 94 95] Applications of this reaction to the preparation of fluonnated... 

More recently, further developments have shown that the reaction outlined in Scheme 4.33 can also proceed for other alkenes, such as silyl-enol ethers of acetophenone [48 b], which gives the endo diastereomer in up to 99% ee. It was also shown that / -ethyl-/ -methyl-substituted acyl phosphonate also can undergo a dia-stereo- and enantioselective cycloaddition reaction with ethyl vinyl ether catalyzed by the chiral Ph-BOX-copper(ll) catalyst. The preparative use of the cycloaddition reaction was demonstrated by performing reactions on the gram scale and showing that no special measures are required for the reaction and that the dihydro-pyrans can be obtained in high yield and with very high diastereo- and enantioselective excess. 

Cyclic and acyclic silyl enol ethers can be nitrated with tetranitromethane to give ct-nitro ketones in 64-96% yield fEqs. 2.42 and 2.43. " The mechanism involves the electron transfer from the silyl enol ether to tetranitromethane. A fast homolydc conphng of the resultant cadon radical of silyl enol ether with NO leads tn ct-nitro ketones. Tetranitromethane is a neutral reagent it is commercially available or readdy prepared. " ... 

Rawal and Kozmin have utilized a Reissert type reac The requisite niiro ketone is prepared by SnAt rea fluoride with ketone silyl enol ether fScheme 10.10. ... 

The chiral (V-camphanoyl iminium ion 7, prepared by hydride abstraction from 2-camphanoyl-l,2,3,4-tetrahydro-6,7-dimethoxyisoquinoline 6 (see Appendix) with triphenylcarbenium te-trafluoroborate, reacts with silyl enol ethers to give 1-substituted tetrahydroisoquinoline derivatives with reasonable diastereoselectivity, 0°. On addition of titanium(IV) chloride, prior to the addition of the silyl enol ether, the diastereoselectivity gradually rises to an optimum at 2.5 equivalents of the Lewis acid, but the yield drops by 20%. 

The enol acetates, in turn, can be prepared by treatment of the parent ketone with an appropriate reagent. Such treatment generally gives a mixture of the two enol acetates in which one or the other predominates, depending on the reagent. The mixtures are easily separable. An alternate procedure involves conversion of a silyl enol ether (see 12-22) or a dialkylboron enol ether (an enol borinate, see p. 560) to the corresponding enolate ion. If the less hindered enolate ion is desired (e.g., 126), it can be prepared directly from the ketone by treatment with lithium diisopropylamide in THE or 1,2-dimethoxyethane at —78°C. ... 

Vinylic lithium reagents (26) react with silyl peroxides to give high yields of silyl enol ethers with retention of configuration. Since the preparation of 26 from vinylic halides (12-37) also proceeds with retention, the overall procedure is a... 

Ketones and carboxylic esters can be a hydroxylated by treatment of their enolate forms (prepared by adding the ketone or ester to LDA) with a molybdenum peroxide reagent (MoOs-pyridine-HMPA) in THF-hexane at -70°C. The enolate forms of amides and estersand the enamine derivatives of ketones can similarly be converted to their a hydroxy derivatives by reaction with molecular oxygen. The M0O5 method can also be applied to certain nitriles. Ketones have also been Qc hydroxylated by treating the corresponding silyl enol ethers with /n-chloroperoxy-... 

The oxidation of silyl enol ethers 111 with palladium(n) acetate is a convenient nnethod for the preparation of synthetically useful 2,6-disubstituted 2,3-dihydro-4-pyridones 112 <95TL(36)9449>. 

In 1991, Kobayashi el al. prepared novel chiral S/N ligands for the tin-mediated aldol reaction of silyl enol ethers with aldehydes. As an example, the reaction of benzaldehyde afforded the expected syn aldol product as the major product with a good yield and an enantioselectivity of up to 92% ee (Scheme 10.26). Moreover, other aldehydes such as substituted benzaldehydes or aliphatic unsaturated aldehydes were converted into their corresponding aldol products with enantioselectivities of more than 90% ee. It was checked that the corresponding diamine ligands provided less active complexes for the same reactions. 

The composition of the enol ethers trimethylsilyl prepared from an enolate mixture reflects the enolate composition. If the enolate formation can be done with high regio-selection, the corresponding trimethylsilyl enol ether can be obtained in high purity. If not, the silyl enol ether mixture must be separated. Trimethylsilyl enol ethers can be prepared directly from ketones. One procedure involves reaction with trimethylsilyl... 

Trimethylsilyl enol ethers can also be prepared by 1,4-reduction of enones using silanes as reductants. Several effective catalysts have been found,38 of which the most versatile appears to be a Pt complex of divinyltetramethyldisiloxane.39 This catalyst gives good yields of substituted silyl enol ethers (e.g., Scheme 1.2, Entry 7). 

The preference for chairlike TSs has been confirmed by using deuterium-labeled enolates prepared from the corresponding silyl enol ethers. The ratio of the location of the deuterium corresponds closely to the ratio of the stereoisomeric enolates for several aldehydes.4... 

Scheme 2.12 shows some representative Mannich reactions. Entries 1 and 2 show the preparation of typical Mannich bases from a ketone, formaldehyde, and a dialkylamine following the classical procedure. Alternatively, formaldehyde equivalents may be used, such as l>is-(di methyl ami no)methane in Entry 3. On treatment with trifluoroacetic acid, this aminal generates the iminium trifluoroacetate as a reactive electrophile. lV,A-(Dimethyl)methylene ammonium iodide is commercially available and is known as Eschenmoser s salt.192 This compound is sufficiently electrophilic to react directly with silyl enol ethers in neutral solution.183 The reagent can be added to a solution of an enolate or enolate precursor, which permits the reaction to be carried out under nonacidic conditions. Entries 4 and 5 illustrate the preparation of Mannich bases using Eschenmoser s salt in reactions with preformed enolates. 

Nitration of the potassium enolates of cycloalkanones with pentyl nitrate81 or nitration of silyl enol ethers with nitronium tetrafluoroborate82 provides a method for the preparation of cyclic a-nitro ketones. Trifluoroacetyl nitrate generated from trifluoroacetic anhydride and ammonium nitrate is a mild and effective nitrating reagent for enol acetates (Eq. 2.41).83... 

In a separate, dry, 1-L, two-necked, round-bottomed flask fitted to a nitrogen bubbler and equipped with a magnetic stirring bar and a septum inlet is added a solution of 12.6 g (60.0 mmol) of 2-(hydroxymethylene)cyclododecanone (Note 4) in 500 mL of anhydrous ether. The stirred ethereal solution of the hydroxymethylene ketone is treated at 22°C with 33 mL of a freshly prepared mixture (1/1, v/v) of chlorotrimethylsilane and triethylamine (Note 5). An immediate reaction takes place with deposition of a white precipitate. The mixture is stirred thoroughly at 22°C for 15 min to insure complete conversion to the silyl enol ether. 

The methyl y-oxoalkanoates shown are not available by alternative methods with similar efficiency and flexibility. Although the reaction of enamines with alkyl ot-bromoacetates proceeds well in some cases, yields are only moderate in many examples.8 A further drawback is that the methods for enamine generation lack the high degree of selectivity and mildness that is characteristic of the preparation of silyl enol ethers. Related alkylations of lithium enolates often afford low yields or polyalkylated products, and are in general very inefficient when aldehydes are utilized as the starting materials.9... 

Enantiomerically pure 2-alkylidenetetrahydrofurans were prepared by TiCl4 mediated reactions of 1,3-bis-silyl enol ethers with enantiomerically pure epichlorohydrin <06TA892>. Rhodium complexes as the one shown below reacted in solution in the presence of triethylphosphine to afford 2,2-disubstituted-5-methylenetetrahydrofurans in good yield <06JA9642>. 

The scope and efficiency of [4+2] cycloaddition reactions used for the synthesis of pyridines continue to improve. Recently, the collection of dienes participating in aza-Diels Alder reactions has expanded to include 3-phosphinyl-l-aza-l,3-butadienes, 3-azatrienes, and l,3-bis(trimethylsiloxy)buta-l, 3-dienes (1,3-bis silyl enol ethers), which form phosphorylated, vinyl-substituted, and 2-(arylsulfonyl)-4-hydroxypyridines, respectively <06T1095 06T7661 06S2551>. In addition, efforts to improve the synthetic efficiency have been notable, as illustrated with the use of microwave technology. As shown below, a synthesis of highly functionalized pyridine 14 from 3-siloxy-l-aza-1,3-butadiene 15 (conveniently prepared from p-keto oxime 16) and electron-deficient acetylenes utilizes microwave irradiation to reduce reaction times and improve yields <06T5454>. 

The stereoselective isomerization of allyl silyl ethers to (E)- or (Z)-silyl enol ethers was carried out in the presence of a cationic iridium(i) catalyst. The complex, prepared in situ by treating [Ir(cod)2]PFf,/2PPi3 with hydrogen was... 

---