Silicon rubbers nanocomposites

Pradhan, B. Srivastava, S. K. Ananthakrishnan, R. Saxena, A., Preparation and Characterization of Exfoliated Layered Double Hydroxide Silicone Rubber Nanocomposites. J.Appl. Polym. Sci. 2011,119, 343-351. [Pg.250]

Jiang, M.-J. Dang, Z.-M. Xu, H.-P., Enhanced Electrical Conductivity in Chemically Modified Carbon Nanotube/Methylvinyl Silicone Rubber Nanocomposite. Ear. Polym. J. 2007, 43, 4924-4930. [Pg.252]

Ramirez I, Jayaram S, Chemey EA (2010) Analysis of temperature profiles and protective mechanism against dry-band arcing in silicone rubber nanocomposites. TEF.E Trans Diel Electr Insul 17 597-606... [Pg.262]

Takala M, Ranta H, Nevalainen P, Pakonen P, Pelto J, Karttunen M, Virtanen S, Koivu V, Pettersson M, Sonerud B, Kannus K (2010) Dielectric properties and partial discharge endurance of polypropylene-silica nanocomposite. IEEE Trans Diel Electr Insul 17 1259-1267 Tanaka T, Kozako M, Fuse N, Ohki Y (2005) Proposal of a multi-core model for polymer nanocomposite dielectrics. IEEE Trans Diel Electr Insul 12 669-681 Vaughan AS, Swingler SG, Zhang Y (2006) Polyethylene nanodielectrics the influence of nanoclays on structure formation and dielectric breakdown. Trans lEE Jpn 126 1057-1063 Venkatesulu B, Thomas MJ (2010) Erosion resistance of alumina-filled silicone rubber nanocomposites. IEEE Trans Diel Electr fiisul 17 615-624 Weibull W (1951) A statistical distribution function of wide applicability. J Appl Mech Trans ASME 18 293-297... [Pg.262]

Katihabwa A, Wang W, Jiang Y, Zhao X, Lu Y, Zhang L (2011) Multi-walled carbon nanotubes/silicone rubber nanocomposites prepared by high shear mechanical mixing. J Reinf Plast Compos 30(12) 1007... [Pg.159]

Dang Z-M, Jiang M-J, Xie D, Yao S-H, Zhang L-Q, Bai J (2008) Supersensitive linear piezoresistive property in carbon nanotubes/silicone rubber nanocomposites. J Appl Phys 104 024114... [Pg.41]

Developments and Properties of Reinforced Silicone Rubber Nanocomposites 87... [Pg.87]

The following methods have invariably been used in the preparation of silicone rubber nanocomposites. [Pg.89]

In this method, a calculated amount of filler is first swollen within the liquid monomer and the polymerization is initiated by heat/radiation in presence of a suitable initiator. Large varieties of silicone rubber nanocomposites have been prepared by this method [122]. [Pg.89]

In this method, a solvent is chosen as a reaction medium in which the polymer (or pre-polymer) is soluble and the nanofillers are also well dispersed. Such polymer/prepolymer and dispersed filler are vigorously intermixed by mechanical stirring/ultrasonic vibration at a desired temperature followed by the evaporation of the solvent. A large number of silicone rubber nanocomposites have been prepared by this method, i.e., silicone foams filled with carbon nanotubes [123-127], graphite nanosheets/sfiicone rubber [128-130], graphene sheets/SR [131], MMT/SR [132], POSS/PDMS nanocomposite [133], LDH/SR [134,135]. [Pg.89]

In this method, the nanofillers are mixed with the polymer matrix in the molten state. This method has great advantages over either in-situ intercalative polymerization or solution intercalation. First, this method is environmentally benign due to the absence of organic solvents. Second, it is compatible with current industrial processes such as extrusion and injection molding. The melt intercalation allows the use of polymers, which are not suitable for in-situ polymerization or the solution intercalation method. A wide range of silicone rubber nanocomposites have been prepared by this method [143,144]. [Pg.89]

Silicone rubber nano composites have been prepared by solution blending, melt intercalation and in-situ polymerization modified clay [125, 142, 143,172, 173]. The maximal tensile strength and compressive strength of CTAB modified MMT (6 wt%)/phenylmethylsilicone nanocomposite in comparison to pure silicone are found to be five and four times higher respectively [41]. Wang et al. [143] used CTAB-modified MMT in the synthesis of silicone rubber nanocomposites and concluded that the tensile strength of... [Pg.96]

B. Pradhan, 2D and 3D nanofillers reinforced silicon rubber nanocomposites Preparation, characterization and properties, Ph.D Thesis, Submitted to Indian Institute of Technology, Kharagpur (2013). [Pg.106]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...