Secondary butyl hydroperoxide

The first practical method for asymmetric epoxidation of primary and secondary allylic alcohols was developed by K.B. Sharpless in 1980 (T. Katsuki, 1980 K.B. Sharpless, 1983 A, B, 1986 see also D. Hoppe, 1982). Tartaric esters, e.g., DET and DIPT" ( = diethyl and diisopropyl ( + )- or (— )-tartrates), are applied as chiral auxiliaries, titanium tetrakis(2-pro-panolate) as a catalyst and tert-butyl hydroperoxide (= TBHP, Bu OOH) as the oxidant. If the reaction mixture is kept absolutely dry, catalytic amounts of the dialkyl tartrate-titanium(IV) complex are suflicient, which largely facilitates work-up procedures (Y. Gao, 1987). Depending on the tartrate enantiomer used, either one of the 2,3-epoxy alcohols may be obtained with high enantioselectivity. The titanium probably binds to the diol grouping of one tartrate molecule and to the hydroxy groups of the bulky hydroperoxide and of the allylic alcohol... 

Oxidation of C12-C14 n-paraffms using boron trioxide catalysts was extensively studied for the production of fatty alcohols.Typical reaction conditions are 120-130°C at atmospheric pressure. ter-Butyl hydroperoxide (0.5 %) was used to initiate the reaction. The yield of the alcohols was 76.2 wt% at 30.5% conversion. Fatty acids (8.9 wt%) were also obtained. Product alcohols were essentially secondary with the same number of carbons and the same structure per molecule as the parent paraffin hydrocarbon. This shows that no cracking has occurred under the conditions used. The oxidation reaction could be represented as ... 

All classes of primary amine (including primary, secondary, and tertiary alkyl as well as aryl) are oxidized to nitro compounds in high yields with dimethyl dioxirane." Other reagents that oxidize various types of primary amines to nitro compounds are dry ozone, various peroxyacids," MeRe03/H202,"" Oxone ," ° tcrt-butyl hydroperoxide in the presence of certain molybdenum and vanadium compounds, and sodium perborate." ... 

Complex (1) is a catalyst for selective oxidation of benzylic, allylic alcohols to aldehydes, and secondary alcohols to ketones using r-butyl hydroperoxide. Primary aliphatic alcohol oxidation failed. The use of cumyl hydroperoxide as radical probe discounted the involvement of i-BuO /t-BuOO. Hammett studies p = -0.47) and kinetic isotope effects kn/ku = 4.8) have been interpreted as suggesting an Ru—OO—Bu-i intermediate oxidant. 

The liquid enthalpy of formation difference between 1-hexyl and 1-heptyl hydroperoxides is almost twice that of a normal enthalpy of formation methylene increment of about 25 kJmol . But which of these two, if either, is correct For hydrocarbon snb-stituents bonded to electronegative functional groups, the secondary isomers are more stable than the n-isomer. Accordingly, either the 1- or 4-heptyl hydroperoxide, or both, have an inaccurate enthalpy of formation because the primary isomer is reported to have the more negative enthalpy of formation. All of the enthalpies of formation for the Cg and C7 hydroperoxides cited in Reference 2 come from a single source. There is a reported value for the gas phase enthalpy of formation of fert-butyl hydroperoxide that is 11 kJ mol less negative than the value in Reference 2. 

Hydroperoxides and peroxides oxidize primary and secondary aliphatic amines to imines. Thus f-butyl hydroperoxide oxidizes 4-methyl-2-pentyl-amine to 2-(4-methylpentylidene)-4-methyl-2-pentylamine in 66% yield [29]. Di-r-butyl peroxide reacts in a similar manner [29]. However, this reaction is... 

Oxidations. The reagent 1 oxidizes primary and secondary alcohols to carbonyl compounds in fair to good yield. It is not useful for epoxidation of simple alkenes, but it epoxidizes allylic alcohols to form a,/ -epoxy alcohols in 60-70% yield, In general, this epoxidation is more stcreospccific than that observed with r-butyl hydroperoxide in combination with Mo(CO)6 (9, 81-82). 

Cumene or isopropylbenzene, diisopropylbenzene, and secondary butyl-benzene, although produced in smaller quantities than some of the other petrochemical alkylates, are very important petroleum refining products. Cumene is further reacted by oxidation to form cumene hydroperoxide, which is converted to phenol and acetone it is produced by alkylating benzene with propylene catalyzed by either solid or liquid phosphoric acid. Secondary butylbenzene is made by alkylating benzene with normal butylene using the same catalysts. Diisopropylbenzene is made by reacting cumene with propylene over solid phosphoric acid or aluminum chloride catalyst. 

Iodine-catalysed hydroperoxidation of cyclic and acyclic ketones with aqueous hydrogen peroxide in acetonitrile is an efficient and eco-friendly method for the synthesis of gem -dihydroperoxides and the reaction is conducted in a neutral medium with a readily available low-cost oxidant and catalyst.218 Aryl benzyl selenoxides, particularly benzyl 3,5-bis(trifluoromethyl)phenyl selenoxide, are excellent catalysts for the epoxidation of alkenes and Baeyer-Villiger oxidation of aldehydes and ketones with hydrogen peroxide.219 Efficient, eco-friendly, and selective oxidation of secondary alcohols is achieved with hydrogen peroxide using aqueous hydrogen bromide as a catalyst. Other peroxides such as i-butyl hydroperoxide (TBHP), sodium... 

Amines — I mines. This reagent can effect dehydrogenation of secondary amines activated by an aryl group or an a,[3-double bond to imines. The rate and the yield are increased by addition of Cl2Ru[P(C6H5),]1 and molecular sieves. In this respect iodosylbenzene differs from /-butyl hydroperoxide, which also effects... 

When primary alkyl phenyl tellurium or secondary alkyl phenyl tellurium compounds in methanol were treated with an excess of 3-chloroperoxybenzoic acid at 20, the phenyltelluro group was eliminated and replaced by a methoxy group. This reaction, which converts alkyl halides used in the synthesis of alkyl phenyl telluriums to alkyl methyl ethers, produced the ethers in yields as high as 90%3-4 Olefins are by-products in these reactions4 With ethanol as the solvent, ethyl ethers were formed. Other oxidizing agents (hydrogen peroxide, ozone, (ert.-butyl hydroperoxide, sodium periodate) did not produce alkyl methyl ethers. 

Aluminophosphates (A1P04) were discovered in 198248 and a large amount of research has been directed towards the incorporation of various elements into the framework of these molecular sieves 49 A particular area of study is the oxidation of primary and secondary alcohols to the corresponding carbonyl compounds, which are useful synthetic intermediates. Traditionally, alcohol transformations are performed with stoichiometric chromium(VI) reagents.50 However, due to environmental problems associated with chromium-containing effluent, attention has focused on the use of chromium in conjunction with oxidizing agents such as tert-butyl hydroperoxide.51 Sheldon and co-workers... 

Oxidation. Oxidations with r-butyl hydroperoxide catalyzed with this Mo complex can be used to effect selective oxidations of secondary alcohols in the presence of primary ones in benzene at 60°. Primary alcohols are oxidized slowly to esters in methanol. Aldehydes are oxidized to carboxylic acids in benzene or to esters in methanol. 

A chromium hexacarbonyl-r-butyl hydroperoxide system has also been developed with the remarkable chemoselective ability to e ect allylic oxidation even in the presence of some secondary alcohols (equations 40 and 41). ... 

Zirconyl acetate [ZrO(OAc)2] has been used as a catalyst for the oxidation of primary aliphatic alcohols to aldehydes, with r-butyl hydroperoxide as cooxidant. Under the reaction conditions benzylic and allylic alcohols are also oxicUzed, but the oxidation of saturated secondary alcohols is slow, and C—C double bonds are unaffected and some degree of chemoselectivity would appear to be feasible. ... 

It is possible to oxidize an alcohol in the presence of sulfur- or selenium-containing groups (equation 16) using r-butyl hydroperoxide and a diselenide as the oxidizing system (this also oxidizes secondary alcohols, see later).Selenium chemistry can also be used to oxidize benzylic and related primary alcohols to the aldehydes without oxidizing pyridyl (18 equation 17) or thiophenyl (19 equation 18) groups. ... 

Several procedures for this chemoselective oxidation utilize molybdenum-based catalysts, with either hydrogen peroxide or r-butyl hydroperoxide as the stoichiometric oxidant. These include ammonium molybdate in the presence of a ph e transfer reagent and hydrogen peroxide, which with pH control (potassium carbonate) will selectively oxidize a secondary alcohol in the presence of a primary alcohol without oxidizing alkenes. In addition hindered alcohols are oxidized in preference to less hindered ones (Scheme 18). 

Benzyltrimethylammonium tetrabromooxomolybdate will catalyze the chemoselective oxidation of secondary alcohols with r-butyl hydroperoxide as cooxidant.Remote double bonds can interfere with this oxidation, and 1,2-diols are converted into 1,2-diketones (Scheme 19). 

---