Resonance REMPI

REMPI Resonance-enhanced multi- Laser-induced ionization ... 

The most widely used of these tecluiiques is resonance-enlianced multiphoton ionization (REMPI) [ ]. A schematic energy-level diagram of the most conunonly employed variant (2 + 1) of this detection scheme is illustrated in the... 

In contrast to the ionization of C q after vibrational excitation, typical multiphoton ionization proceeds via the excitation of higher electronic levels. In principle, multiphoton ionization can either be used to generate ions and to study their reactions, or as a sensitive detection technique for atoms, molecules, and radicals in reaction kinetics. The second application is more common. In most cases of excitation with visible or UV laser radiation, a few photons are enough to reach or exceed the ionization limit. A particularly important teclmique is resonantly enlianced multiphoton ionization (REMPI), which exploits the resonance of monocluomatic laser radiation with one or several intennediate levels (in one-photon or in multiphoton processes). The mechanisms are distinguished according to the number of photons leading to the resonant intennediate levels and to tire final level, as illustrated in figure B2.5.16. Several lasers of different frequencies may be combined. 

As an example, we mention the detection of iodine atoms in their P3/2 ground state with a 3 + 2 multiphoton ionization process at a laser wavelength of 474.3 run. Excited iodine atoms ( Pi/2) can also be detected selectively as the resonance condition is reached at a different laser wavelength of 477.7 run. As an example, figure B2.5.17 hows REMPI iodine atom detection after IR laser photolysis of CF I. This pump-probe experiment involves two, delayed, laser pulses, with a 200 ns IR photolysis pulse and a 10 ns probe pulse, which detects iodine atoms at different times during and after the photolysis pulse. This experiment illustrates a frindamental problem of product detection by multiphoton ionization with its high intensity, the short-wavelength probe laser radiation alone can photolyse the... 

REMPI resonance-enhanced multiphoton ionization spectroscopy... 

This chapter deals mainly with (multi)hyphenated techniques comprising wet sample preparation steps (e.g. SFE, SPE) and/or separation techniques (GC, SFC, HPLC, SEC, TLC, CE). Other hyphenated techniques involve thermal-spectroscopic and gas or heat extraction methods (TG, TD, HS, Py, LD, etc.). Also, spectroscopic couplings (e.g. LIBS-LIF) are of interest. Hyphenation of UV spectroscopy and mass spectrometry forms the family of laser mass-spectrometric (LAMS) methods, such as REMPI-ToFMS and MALDI-ToFMS. In REMPI-ToFMS the connecting element between UV spectroscopy and mass spectrometry is laser-induced REMPI ionisation. An intermediate state of the molecule of interest is selectively excited by absorption of a laser photon (the wavelength of a tuneable laser is set in resonance with the transition). The excited molecules are subsequently ionised by absorption of an additional laser photon. Therefore the ionisation selectivity is introduced by the resonance absorption of the first photon, i.e. by UV spectroscopy. However, conventional UV spectra of polyatomic molecules exhibit relatively broad and continuous spectral features, allowing only a medium selectivity. Supersonic jet cooling of the sample molecules (to 5-50 K) reduces the line width of their... 

The use of GC-MS in polymer/additive analysis is now well established. Various GC-based polymer/additive protocols have been developed, embracing HTGC-MS, GC-HRMS and fast GC-MS with a wide variety of front-end devices (SHS, DHS, TD, DSI, LD, Py, SPE, SPME, PTV, etc.). Ionisation modes employed are mainly El, Cl (for gases) and ICPI (for liquid and solid samples). Useful instrumental developments are noticed for TD-GC-MS. GC-SMB-MS is a fast analytical tool as opposed to fast chromatography only [104]. GC-ToFMS is now about to take off. GC-REMPI-MS represents a 3D analytical technique based on compound-selective parameters of retention time, resonance ionisation wavelength and molecular mass [105]. 

REMPI Resonance enhanced multiphoton Raman spectroscopy... 

For ion TOF measurement a probe laser was used to ionize reaction products in the reaction zone. The (1 + F) resonance-enhanced multiphoton ionization (REMPI) method was adapted for H-atom detection. The necessary vacuum ultraviolet (VUV) radiation near 121.6 nm (for Lyman-a transition) can readily be generated by a frequency-tripling technique in a Kr cell.37 The sensitivity of this (1 +1 ) REMPI detection scheme is extremely high owing to the large absorption cross-section of Lyman-a transition,... 

The general principle of detection of free radicals is based on the spectroscopy (absorption and emission) and mass spectrometry (ionization) or combination of both. An early review has summarized various techniques to detect small free radicals, particularly diatomic and triatomic species.68 Essentially, the spectroscopy of free radicals provides basic knowledge for the detection of radicals, and the spectroscopy of numerous free radicals has been well characterized (see recent reviews2-4). Two experimental techniques are most popular for spectroscopy studies and thus for detection of radicals laser-induced fluorescence (LIF) and resonance-enhanced multiphoton ionization (REMPI). In the photochemistry studies of free radicals, the intense, tunable and narrow-bandwidth lasers are essential for both the detection (via spectroscopy and photoionization) and the photodissociation of free radicals. 

In resonance-enhanced multiphoton ionization (REMPI, also commonly referred to as resonance ionization—RI) near-UV photons can be used for ionization [60]. When... 

The simplest version of REMPI uses a two photon (1-1-1) process, namely resonant two photon ionization (R2PI). In this, the species M is first promoted from its electronic ground state So to the electronic excited state Si via a resonant absorption step. Then, the non-resonant absorption of a second photon takes the species into the ionization continuum. If the frequencies of the excitation and ionization photons are equal, the process is named one color R2PI (lcR2PI), otherwise two colors R2PI (2cR2PI) (Fig. 1). 

Atmospheric pressure laser ionization (APLl) is a complementary technique to existing API methods. It is based on resonant or near-resonant two-photon ionization of aromatic ring systems. APLI utilizes resonantly enhanced multiphotonionization (REMPI) as the primary ion-production mechanism, nevertheless it occurs at atmospheric pressure [80],... 

---