Resin Transfer Molds

C. F. Johnson, Resin Transfer Molding and Structural Reaction Injection Molding in Engineering Materials Handbook, Vol. 2, ASM, International, USA (1988). 

Resin Transfer Molding Spray-up Hand Lay-up Mat-Preform Compound... 

Resin transfer molding With vacuum assisted RTM, this process can be called infusion molding. RTM usually uses liquid TS plastics that is transferred or injected into an enclosed mold usually at low pressures of about 60 psi (410 kPa) in which reinforcement... 

SCRIMP process This Seeman Composites Resin Infusion Process (SCRIMP) is described as a gas-assist resin transfer molding process. As an example glass fiber fabrics/ thermoset vinyl ester polyester plastic and polyurethane foam panels (for insulation) are placed in a segmented tool. A vacuum is pulled with a bag so that a huge amount of plastic can be drawn into the mold (Marco process approach). Its curved roof is made separately and bonded to the box with mechanical and adhesive fastening. It is similar to various reinforced plastics molding processes. 

Spray ing/bru shing/rolling Resin transfer molding Rotational casting Rotomolding Thermoforming Compounding/vulcani-zation... 

Conversion of cyclic oligomers to composite structures via Resin Transfer Molding (RTM) and Reaction Injection Molding (RIM) techniques has been demonstrated, and will be the subject of subsequent publications. Glass loadings... 

Differentiate between pultrusion, resin transfer molding, and filament winding methods for fiber-reinforced composite production. 

Resin transfer molding (RTM) is a hybrid of two polymer processing techniques we have already described transfer molding and reaction injection molding (RIM). The key difference is that a reinforcement is incorporated during molding to create a composite. 

Figure 7.90 Schematic diagram of a typical resin transfer molding (RTM) process. Reprinted, by permission, M. Schwartz, Composite Materials Handbook, 2nd ed., p. 4.56. Copyright 1992 by McGraw-HiU.

---