Relaxed dielectric constant

The static value s is called the relaxed dielectric constant and the short-time (or high-frequency) value lDO the non-relaxed dielectric constant es — e,x, is called the dielectric strength. They are equal to... 

Non-Fickian diffusion, 696 Non-functional structural groups, 129 Non-linear optics, 347 Non-Newtonian viscosity, 554 Non-redox doping, 345 Non-relaxed dielectric constant, 325 Normal... 

Here a is the bulk ionic or dc conductivity is the angular frequency (27rf) r is the dipole relaxation time is the relaxed dielectric constant or low frequency/high temperature dielectric constant (relative permittivity due to induced plus static dipoles) is the unrelaxed dielectric constant or high frequency/low temperature dielectric constant (relative permittivity due to induced dipoles only) o is the permitivity of free space E p is the electrode polarization term for permittivity and E"-p is the electrode polarization term for loss factor. The value of E p and E"p is usually unity, except when ionic conduction is very high (75). 

Polymer chain motion, Tg Damping, creep and relaxation, dielectric constant... 

Electrical conductivity, thermal conductivity, color/absorbance Refractive index, reflectance Density/speciflc gravity Damping, creep and relaxation, dielectric constant Coefficient of expansion... 

Dielectric Behavior of Adsorbed Water. Determination of the dielectric absorption of adsorbed water can yield conclusions similar to those from proton NMR studies and there is a considerable, although older literature on the subject. Figure XVI-7 illustrates how the dielectric constant for adsorbed water varies with the frequency used as well as with the degree of surface coverage. A characteristic relaxation time r can be estimated... 

The dielectric constant (permittivity) tabulated is the relative dielectric constant, which is the ratio of the actual electric displacement to the electric field strength when an external field is applied to the substance, which is the ratio of the actual dielectric constant to the dielectric constant of a vacuum. The table gives the static dielectric constant e, measured in static fields or at relatively low frequencies where no relaxation effects occur. 

A variety of experimental techniques have been employed to research the material of this chapter, many of which we shall not even mention. For example, pressure as well as temperature has been used as an experimental variable to study volume effects. Dielectric constants, indices of refraction, and nuclear magnetic resonsance (NMR) spectra are used, as well as mechanical relaxations, to monitor the onset of the glassy state. X-ray, electron, and neutron diffraction are used to elucidate structure along with electron microscopy. It would take us too far afield to trace all these different techniques and the results obtained from each, so we restrict ourselves to discussing only a few types of experimental data. Our failure to mention all sources of data does not imply that these other techniques have not been employed to good advantage in the study of the topics contained herein. 

R = factor for electrical relaxation D = dielectric constant of medium F = factor for size of spheres and = zeta potential. 

For many years the petroleum industry has defined nonconductive liquids as having conductivities less than 50 pS/m. A higher value of 100 pS/m is used here to address the higher dielectric constants of certain flammable chemicals in relation to petroleum products. For example the dielectric constant of ethyl ether is 4.6 versus 2.3 for benzene from Eq. (2-3.2), ethyl ether therefore has the same relaxation time at a conductivity of 100 pS/m as benzene at a conductivity of 50 pS/m. It is the relaxation time, not the conductivity alone, that determines the rate of loss of charge hence the same logic that makes 50 pS/m appropriate for identifying nonconductive hydrocarbons makes 100 pS/m appropriate for identifying nonconductive chemical products. 

The addition of salts modifies the composition of the layer of charges at the micellar interface of ionic surfactants, reducing the static dielectric constant of the system [129,130]. Moreover, addition of an electrolyte (NaCl or CaCli) to water-containing AOT-reversed micelles leads to a marked decrease in the maximal solubihty of water, in the viscosity, and in the electrical birefringence relaxation time [131],... 

Dielectric relaxation studies of phosphorylated polyethers from — 180° to 200 °C have been used to study their structures. The magnitude of the dielectric constants of high-phosphonic-acid-content polymers is much larger than predicted, which suggests a microphase-separated structure. Conductance studies on some aryl- and alkyl-phosphonium salts showed a higher conductance for the halides than for the nitrate. ... 

A larger protein dielectric constant of four was used by Eberini et al. [124] to fit the experimental pKa, in a case where the protein structural relaxation upon protonation was especially large. The need for a larger protein dielectric suggests a breakdown of the linear response assumption for this system. It may be preferable in such a case to simulate an additional point along the reaction pathway, such as the midpoint, rather than shifting to what is effectively a parameter-fitting approach. 

---