Sacrificial reductant

H2 or O2 from water in the presence of a sacrificial reductant or oxidant employ a mthenium complex, typically [Ru(bipy)2], as the photon absorber (96,97). A series of mixed binuclear mthenium complexes having a variety of bridging ligands have been the subject of numerous studies into the nature of bimolecular electron-transfer reactions and have been extensively reviewed (99—102). The first example of this system, reported in 1969 (103), is the Creutz-Taube complex [35599-57-6] [Ru2(pyz)(NH3. 

The most significant chemical property of zinc is its high reduction potential. Zinc, which is above iron in the electromotive series, displaces iron ions from solution and prevents dissolution of the iron. For this reason, zinc is used extensively in coating steel, eg, by galvanizing and in zinc dust paints, and as a sacrificial anode in protecting pipelines, ship hulls, etc. 

New combined (or binary) alloy sacrificial anodes have been developed . An aluminium anode, for example, might have attached to it a short-life supplementary magnesium anode, or anodes, for quick polarisation of the structure. The overall reduction in structure current requirements is claimed to result in an anode weight saving of 35-50% . 

In view of the above physical meaning of A it is clear why A can approach infinite values when Na+ is used as the sacrificial promoter (e.g. when using j "-Al203 as the solid electrolyte) to promote reactions such as CO oxidation (Fig. 4.15) or NO reduction by H2 (Fig. 4.17). In this case Na on the catalyst surface is not consumed by a catalytic reaction and the only way it can be lost from the surface is via evaporation. Evaporation is very slow below 400°C (see Chapter 9) so A can approach infinite values. 

The chemical reactivity of metallic Mg has been utilized in several ways. It is employed in the reduction step in the manufacture of Ti, in the deoxidation and desulfurization of steels and in the nodularization of cast iron. It has also been used for the preparation of photoengraving plates, in dry batteries, and as a sacrificial anode for cathodic protection of other metals. 

In the future, further studies should be addressed to improve the chemose-lectivity and diastereoselectivity of the reductive coupling process, especially searching for novel reagents and milder experimental conditions. As a matter of fact, a few novel reductive couphng procedures which showed improved efficiency and/or stereoselectivity have not been further apphed to optically active imines. For example, a new electrochemical procedure which makes use of the spatially addressable electrolysis platform with a stainless steel cathode and a sacrificial aluminum anode has been developed for imines derived from aromatic aldehydes, and the use of the N-benzhydryl substituent allowed 1,2-diamines to be obtained with good yields and dl-to-meso ratios... 

Transition-metal catalyzed photochemical reactions for hydrogen generation from water have recently been investigated in detail. The reaction system is composed of three major components such as a photosensitizer (PS), a water reduction catalyst (WRC), and a sacrificial reagent (SR). Although noble-metal complexes as WRC have been used [214—230], examples for iron complexes are quite rare. It is well known that a hydride as well as a dihydrogen (or dihydride) complex plays important roles in this reaction. 

Using electrons for the electrolytic reduction of metal salts, Reetz and coworkers have introduced a further variation to the tetraalkylammoniumhalide-stabilization mode [192-198]. The overall electrochemical process can be divided into the following steps (i) oxidative dissolution of the sacrificial Metbuik anode, (ii) migration of Met ions to the cathode, (iii) reductive formation of... 

Reduction of two different precious metal ions by refluxing in ethanol/water in the presence of PVP gave a colloidal dispersion of core/shell structured bimetallic nanoparticles. In the case of Pd and Au ions, e.g., the colloidal dispersions of bimetallic nanoparticles with a Au core/Pd shell structure are produced. In contrast, it is difficult to prepare bimetallic nanoparticles with the inverted core/shell (in this case, Pd-core/Au-shell) structure. The sacrificial hydrogen strategy was used to construct the inverted core/shell structure, where the colloidal dispersions of Pd-cores are treated with hydrogen and then the solution of the second element, Au ions, is slowly added to the dispersions. This novel method, developed by us, gave the inverted core/shell structured bimetallic nanoparticles. The Pd-core/Au-shell structure was confirmed by FT-IR spectra of adsorbed CO [144]. 

Ru(bipy)3 formed in this reaction is reduced by the sacrificial electron donor sodium ethylenediaminetetra-acetic acid, EDTA. Cat is the colloidal catalyst. With platinum, the quantum yield of hydrogenation was 9.9 x 10 . The yield for C H hydrogenation was much lower. However, it could substantially be improv l by using a Pt colloid which was covered by palladium This example demonstrates that complex colloidal metal catalysts may have specific actions. Bimetalic alloys of high specific area often can prepared by radiolytic reduction of metal ions 3.44) Reactions of oxidizing radicals with colloidal metals have been investigated less thoroughly. OH radicals react with colloidal platinum to form a thin oxide layer which increases the optical absorbance in the UV and protects the colloid from further radical attack. Complexed halide atoms, such as Cl , Br, and I, also react... 

Low-valent lanthanides represented by Sm(II) compounds induce one-electron reduction. Recycling of the Sm(II) species is first performed by electrochemical reduction of the Sm(III) species [32], In one-component cell electrolysis, the use of sacrificial anodes of Mg or A1 allows the samarium-catalyzed pinacol coupling. Samarium alkoxides are involved in the transmet-allation reaction of Sm(III)/Mg(II), liberating the Sm(III) species followed by further electrochemical reduction to re-enter the catalytic cycle. The Mg(II) ion is formed in situ by anodic oxidation. SmCl3 can be used in DMF or NMP as a catalyst precursor without the preparation of air- and water-sensitive Sm(II) derivatives such as Sml2 or Cp2Sm. 

Later, an improved system for C02 photofixation was reported by the same authors.164 The new system consisted of 6.5 x 1(T5 M tris(2,2 -bipyridine)ruthenium(II), Ru(bpy)3, as the photosensitive electron donor, methyl viologen (MV2+, 20 mM) as the electron acceptor, and triethanolamine (TEOA, 0.6 M) as a sacrificial electron donor in a C02-saturated aqueous solution (Fig. 18). Under irradiation with a 300-W high-pressure Hg lamp with a CuS04 chemical filter (A > 320 nm), formic acid, which was detected by isotachophoresis, was produced in quantum yields of ca. 0.01%. Recently, however, Kase et al.165 have repeated this experiment using a 13C02 tracer and have claimed that the formic acid obtained was produced not by C02 reduction but rather by oxidative cleavage of TEOA. 

Lehn and Ziessel166 have also developed systems for the photochemical reduction of C02. These systems are similar to those represented by Fig. 18. Visible-light irradiation of C02-saturated aqueous acetonitrile solutions containing Ru(bpy)2+ as a photosensitizer, cobalt(II) chloride as an electron acceptor, and triethyl-amine as a sacrificial electron donor gave carbon monoxide and... 

Fig. 9. Postulated oxidation state changes occurring at the Mo and Fe centers of SO during the catalytic oxidation of sulfite, and concomitant reduction of cyt c. The one-electron reduction shown with a dashed arrow connecting MoVIFem and MoVIFen can be initiated with a laser pulse, in a solution containing 5-deazariboflavin (dRF) and a sacrificial electron donor (AH2). Reprinted with permission from Ref. (20). Copyright 1999, Society of Biological Inorganic Chemistry.

The applications of polyoxometalates in catalytic dehalogenation of halocar-bons have been succinctly reviewed by Hill and coworkers [188]. This reaction involves the photocatalytic transformation of organic halides coupled with the oxidation of sacrificial organic reductants (secondary alcohols or tertiary amides) (Eq. (9)) [189, 190] ... 

It is possible to use isolated, partially purified enzymes (dehydrogenases) for the reduction of ketones to optically active secondary alcohols. However, a different set of complications arises. The new C H bond is formed by delivery of the hydrogen atom from an enzyme cofactor, nicotinamide adenine dinucleotide (phosphate) NAD(P) in its reduced form. The cofactor is too expensive to be used in a stoichiometric quantity and must be recycled in situ. Recycling methods are relatively simple, using a sacrificial alcohol, or a second enzyme (formate dehydrogenase is popular) but the real and apparent complexity of the ensuing process (Scheme 8)[331 provides too much of a disincentive to investigation by non-experts. 

The reactions appear to be similar to organometallic synthesis, where the reduction is performed by the metal instead of electricity. However, these reactions have been shown to be essentially different from the corresponding organometallic reactions. This method has valuable advantages. As the anode reaction is controlled, an undivided cell can be used, the reaction occurs in one-step, the conditions are quite simple, and so on. Sibille and Perichon et al. have found that the sacrificial zinc anode is quite effective for trifluoromethylation of aldehydes to form trifluoromethylated alcohols in almost quantitative yields (Eq. 6) [19]. The reaction proceeds via the reduction of Zinc(II) salts, followed by a chemical reaction between the reduced metal, CF3Br, and aldehyde. 

A typical example is the synthesis of oxalic acid. Electrochemical synthesis of oxalic acid by reduction of C02 in aprotic media with a Zn sacrificial anode was brought to pilot scale by the Dechema Institute some years ago (1981) [177]... 

In an undivided cell, the sacrificial anode is used so that it is oxidized in preference to the silyl and chloride ions. There is thus a requirement for the reduction potential of the sacrificial anode to be more negative than the reduction potential of the silyl chlorides, Eesich that is, E°m < E°sici (Equation (3) and Equation (4)) ... 

---