Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Recrystallization, synthesis

Synthesis of (A) started with the combination of 2,4,6-trimethylphenol and allyl bromide to give the or/Ao-allyl dienone. Acid-catalyzed rearrangement and oxidative bydroboration yielded the dienone with a propanol group in porlactone ring were irons in the product as expected (see p. 275). Treatment with aqueous potassium hydroxide gave the epoxy acid, which formed a crystalline salt with (R)-l-(or-naphthyl)ethylamine. This was recrystallized to constant rotation. [Pg.319]

The product can be recrystallized readily from dimethyl-formamide to give yellow leaflets, m.p. 290-293°. However, it is pure enough to be used in the next step. This synthesis has also been applied to the preparation of l,4-bis-[4-( -tolyl)buta-dienyljbenzene (100%), l,4-bis-[4-(3-nitrophenyl)butadienyl]-benzene (56%), and l,4-bis-(3-methyl-4-phenylbutadienyl)ben-zene (87%). [Pg.87]

Although the first all-sulfur macrocycles were prepared many years ago " the first systematic study of such compounds was initiated by Busch and his coworkers , who were interested in the cation binding properties of such ligands. A sequential synthesis was utilized to produce 1,4,8,11-tetrathiacyclotetradecane [tetrathia-14-crown-4 (70)] . In the first step, 1,3-propanedithiol is metallated using sodium and alkylated with 2-chloroethanol. The diol was then treated with thiourea to form the dimercapto-dithioether compound 9. The latter was once again metallated with sodium and allowed to react with 1,3-dibromopropane. The yield of 70 in the ring closure step, conducted at high dilution in absolute ethanol, was 7.5% after recrystallization. The entire sequence is illustrated in Eq. (6.8) . ... [Pg.270]

Meyers has also reported the use of chiral oxazolines in asymmetric copper-catalyzed Ullmann coupling reactions. For example, treatment of bromooxazoline 50 with activated copper powder in refluxing DMF afforded binaphthyl oxazoline 51 as a 93 7 mixture of atropisomers diastereomerically pure material was obtained in 57% yield after a single recrystallization. Reductive cleavage of the oxazoline groups as described above afforded diol 52 in 88% yield. This methodology has also been applied to the synthesis of biaryl derivatives. [Pg.243]

The residue is triturated with methanol to afford a crystalline solid. This material contains no detectable amount of starting material by paperstrip chromatography but shows two UV absorbing spots near the solvent front (methanol-formamide 2 1 vs benzene-n-hexane 1 1). An aliquot is recrystallized three times from a mixture of benzene and n-hexane to give 17a,20,20,21-bis(methylenedioxy)-11(3-hydroxy-6,16a-dimethyl-4,6-pregnadiene-3-one which is used in the subsequent step of the synthesis without further purification. [Pg.391]

In extending this direct method of synthesis, we next investigated the possibility of preparing similarly constituted halides from 2-deoxy-D-arabino-hexose (2-deoxy-D-glucose) (21). The hexose was subjected to a partial anomerization procedure described by Bergmann and co-workers (1). The solid material obtained by this procedure is a mixture of the anomeric forms of 2-deoxy-D-arabino-hexose low temperature p-nitro-benzoylation of the latter in pyridine resulted in a mixture of crystalline, anomeric tetrakis-p-nitrobenzoates in a ratio of approximately 1 1. They were readily separable by fractional recrystallization, and treatment of either with an excess of hydrogen bromide in dichloromethane, or with... [Pg.11]

Synthesis of the compounds from such HF solutions is performed by adding soluble fluoride compounds to the tantalum or niobium solution or by recrystallization of prepared fluoride compounds from water or HF solutions of different concentrations. In the first case, the composition of the compounds obtained depends on the ratio between Ta/Nb and the added metal and on the initial concentration of the HF used, whereas in the second case, it depends only on the HF concentration. [Pg.13]

The synthesis of key intermediate 12, in optically active form, commences with the resolution of racemic trans-2,3-epoxybutyric acid (27), a substance readily obtained by epoxidation of crotonic acid (26) (see Scheme 5). Treatment of racemic 27 with enantio-merically pure (S)-(-)-1 -a-napthylethylamine affords a 1 1 mixture of diastereomeric ammonium salts which can be resolved by recrystallization from absolute ethanol. Acidification of the resolved diastereomeric ammonium salts with methanesulfonic acid and extraction furnishes both epoxy acid enantiomers in eantiomerically pure form. Because the optical rotation and absolute configuration of one of the antipodes was known, the identity of enantiomerically pure epoxy acid, (+)-27, with the absolute configuration required for a synthesis of erythronolide B, could be confirmed. Sequential treatment of (+)-27 with ethyl chloroformate, excess sodium boro-hydride, and 2-methoxypropene with a trace of phosphorous oxychloride affords protected intermediate 28 in an overall yield of 76%. The action of ethyl chloroformate on carboxylic acid (+)-27 affords a mixed carbonic anhydride which is subsequently reduced by sodium borohydride to a primary alcohol. Protection of the primary hydroxyl group in the form of a mixed ketal is achieved easily with 2-methoxypropene and a catalytic amount of phosphorous oxychloride. [Pg.176]

The synthesis of key intermediate 6 begins with the asymmetric synthesis of the lactol subunit, intermediate 8 (see Scheme 3). Alkylation of the sodium enolate derived from carboximide 21 with allyl iodide furnishes intermediate 26 as a crystalline solid in 82 % yield and in >99 % diastereomeric purity after recrystallization. Guided by transition state allylic strain conformational control elements5d (see Scheme 4), the action of sodium bis(trimethylsilyl)amide on 21 affords chelated (Z)-enolate 25. Chelation of the type illustrated in 25 prevents rotation about the nitrogen-carbon bond and renders... [Pg.491]

Another example of reagent-induced asymmetric synthesis is the enantioselective preparation of phosphoramides 6 by addition of dialkylzine reagents to A-diphenylphosphinoylimincs 4 in the presence of the enantiomerically pure 1,2-amino alcohols 5a or 5 b (diethylzinc does not add to A-silyl- or A-phenylimines)12. Phosphoramides 6 (crystalline solids) are obtained in moderate to good yield and good enantioselectivity. The latter can be enhanced by recrystallization. Acidic hydrolysis with dilute 3 M hydrochloric acid/tetrahydrofuran provides the corresponding amines 7 without any racemization. [Pg.701]

The method illustrated here does have, however, several excellent features.10 The peptide yields are very good even in the synthesis of asparaginyl and glutaminyl peptides, which are ordinarily very difficult to prepare in reasonable yield. Furthermore, the by-products are all water-soluble and, therefore, easily removed from the product peptide derivative. One recrystallization, even under conditions of almost... [Pg.93]

Chiral alcohols have also been used in an asymmetric synthesis of sulphoxides based on halogenation of sulphides. Johnson and coworkers have found319 that the reaction of benzyl p-tolyl sulphide with JV-chlorobenzotriazole (NCBT) followed by addition of (—) menthol and silver tetrafluoroborate afforded diastereoisomeric menthoxysulphonium salts 267 which, upon recrystallization and hydrolysis, gave benzyl p-tolyl sulphoxide with 87% optical purity (equation 145). More recently, Oae and coworkers reported320 that optically active diaryl sulphoxides (e.e. up to 20%) were formed either by hydrolysis or thermolysis of the corresponding diaryl menthoxysulphonium salts prepared in situ from diaryl sulphides using ( —) menthol and t-butyl hypochlorite. [Pg.295]

The aqueous layer remaining after extraction with n-butanol was acidified (to pH 1) by the addition of 50% sulfuric acid, giving a precipitate of adipic acid which was collected by filtration, washed with 120 parts of water in two equal portions, and dried at 110° C. The crude adipic acid obtained was recrystallized from twice its weight of water to provide adipic acid in 90.2% yield, which was pure enough to be used in the synthesis of adiponitrile. [Pg.567]

Isoquinoline must be completely dissolved prior to the addition of N-bromosuccinimide. N-Bromosuccinimide (99%) was purchased from Aldrich Chemical Company, Inc. and recrystallized2 and air-dried prior to use. Recrystallization is essential in order to obtain high yield and pure product. The use of more NBS than stated (i.e., more than 1.1 equiv for the synthesis of 5-bromoisoquinoline and 1.3 equiv for the synthesis of 5-bromo-8-nitroisoquinoline) to obtain complete transformation of isoquinoline should be avoided as this leads to formation of 5,8-dibromoisoquinoline, which cannot easily be separated from 5-bromoisoquinoline and which will also lead to a lower yield of 5-bromo-8-nitroisoquinoline. [Pg.51]

Enantiopure (R)- and (S)-nipecotic acid (Nip) derivatives 64 were obtained following classical resolution of ethyl nipecotate with either enantiomer of tartaric acid and successive recrystallization of the corresponding salts [153, 154, 156] or by resolution of racemic nipecotic acid with enantiomerically pure camphorsul-fonic acid [154]. N-Boc protected pyrrolidine-3-carboxylic acid (PCA) 65 for the synthesis of homo-ohgomers [155] was prepared by GeUman from trans-4-hydroxy-L-prohne according to a known procedure [157]. [Pg.49]

The same phosphine-borane used for the synthesis of BisP acted as the starting materials of the construction of MiniPHOS, the next smaller analogue to BisP (Scheme 13). The chirally induced lithium salt was treated with alkylphos-phorus dichloride, methylmagnesium bromide, and borane-THF complex to afford enantiomerically pure MiniPHOS-borane 82a. Recrystallization enabled elimination of a small amount of corresponding raeso-diastereomer formed [29]. Yields were generally low, ranging from 13 to 28%. [Pg.21]

Dichlorodibenzo-p-dioxin was prepared from isotopic potassium 2,4-dichlorophenate uniformly labeled with Ullman conditions gave a 20.5% yield. Small amounts of dichlorophenoxy chlorophenol were removed from the product by extraction with sodium hydroxide before purification by fractional sublimation and recrystallization from anisole. Chlorination of 2,7-dichlorodibenzo-p-dioxin in chloroform solution containing trace amounts of FeCls and 12 yielded a mixture of tri-, tetra-, and pentachloro substitution products. Purification by digestion in boiling chloroform, fractional sublimation, and recrystallization from anisole was effective in refining this product to 92% 2,3,7,8-tetrachloro isomer, which also contained 7% of the tri- and 1% of the penta-substituted dibenzo-p-dioxin. Mass spectroscopy was used exclusively to monitor the quality of the products during the synthesis. [Pg.1]

During the course of an attempted recrystallization of this complex from benzene containing chlorinated impurities the solution was exposed to light. The crystalline compound that formed from this solution was identified by X-ray crystallography as Mo(TPP)(Ph)Cl (Fig. 3). The complex contains Irons phenyl and chloro ligands, and the Mo—C and Mo—N4 plane distances are 2.241(1) and 0.125 A, respectively. A systematic synthesis of the complex could not subsequently be developed and consequently other spectroscopic and magnetic data were not collected. [Pg.243]

The feasibility of synthesizing oxovanadium phthalocyanine (VOPc) from vanadium oxide, dicyanobenzene, and ethylene ycol using the microwave synthesis was investigated by comparing reaction temperatures under the microwave irradiations with the same factors of conventional synthesis. The efficiency of microwave synthesis over the conventional synthesis was illustrated by the yield of crude VOPc. Polymorph of VOPc was obtained ttough the acid-treatment and recrystallization step. The VOPos synthesized in various conditions were characterized hy the means of an X-ray dif actometry (XRD), a scanning electron microscopy (SEM), and a transmission electron Microscopy (TEM). [Pg.801]

To prepare the charge generation material of photoreceptor used in xerography, the crude VOPc synthesized at 150 °C for 4 h in the microwave synthesis was acid-treated, and then recrystallized. As shown in Fig. 4, the amorphous VOPc can be obtainol from crude VOPc by acid-treatment and the fine crystal VOPc can he obtained fixim amorphous VOPc by recrystallization. From XRD results, it can be calculated that the crystallite size of fine crystal VOPc is about 18 nm. As shown in Fig. 5, the fine crystal VOPc is well dispersed with uniform size. It indicates that this fine crystal VOPC can be probably used as the chaige generation material of photoreceptor. Thus, further research will be required to measure the electrophotographic properties of fine crystal VOPc. [Pg.803]

The microwave synthesis described in the present paper has proven to be quite eifective due to its intense internal heating, compffl ed to conventional syndesis. The yield of crude VOPc increased with increasing the reaction temperature under both synthetic methods. Fine crystal VOPc was prepared successfiiUy from the crude VOPc obtained by microwave synthesis through the acid-treatment and recrystallization step. [Pg.804]

Scheme 4.19 Trost (—)-physostigmine synthesis plan (2006). (a) EtaN (72%) (b) (CH3)2SO (88%) (c) diallyl carbonate, LiOfBu, Mo, L (98%) (d) I/2OSO4, then Nal04 (92%) (e) recrystallization from iPrOH-cyclohexane (72%) (f) CH3NH2 HCI, then 1/2LiAlH4, 2H2O (88%) (g) BBra, 3H2O (79%) (h) Na, CH3N=C=0, then H2O (79%). Scheme 4.19 Trost (—)-physostigmine synthesis plan (2006). (a) EtaN (72%) (b) (CH3)2SO (88%) (c) diallyl carbonate, LiOfBu, Mo, L (98%) (d) I/2OSO4, then Nal04 (92%) (e) recrystallization from iPrOH-cyclohexane (72%) (f) CH3NH2 HCI, then 1/2LiAlH4, 2H2O (88%) (g) BBra, 3H2O (79%) (h) Na, CH3N=C=0, then H2O (79%).

See other pages where Recrystallization, synthesis is mentioned: [Pg.505]    [Pg.80]    [Pg.287]    [Pg.130]    [Pg.102]    [Pg.111]    [Pg.672]    [Pg.46]    [Pg.49]    [Pg.172]    [Pg.174]    [Pg.345]    [Pg.702]    [Pg.52]    [Pg.491]    [Pg.788]    [Pg.799]    [Pg.73]    [Pg.81]    [Pg.16]    [Pg.343]    [Pg.223]    [Pg.9]    [Pg.18]    [Pg.133]    [Pg.51]    [Pg.245]    [Pg.73]   


SEARCH



Recrystallization

Recrystallizations

Recrystallized

© 2024 chempedia.info