Reagent coating process

The pH of the pulp to the flotation cells is carefliUy controlled by the addition of lime, which optimizes the action of all reagents and is used to depress pyrite. A frother, such as pine oil or a long-chain alcohol, is added to produce the froth, an important part of the flotation process. The ore minerals, coated with an oily collected layer, are hydrophobic and collect on the air bubbles the desired minerals float while the gangue sinks. Typical collectors are xanthates, dithiophosphates, or xanthate derivatives, whereas typical depressants are calcium or sodium cyanide [143-33-9] NaCN, andlime. 

The coating of the adsorbent layer with the reagent solution is more homogeneous than with even the most carefully carried out spraying process. 

A final category of encapsulating materials consists of reaction products of the nucleus material and a reagent. For example, pellets of nitronium perchlorate have been encapsulated in shells of the less reactive amm perchlorate (AP) by exposing the pellets to ammonia gas. The fragile AP shells were usually further protected by a top-coating of A1 or a polymer film (Ref 2). The most familiar example of this process is the natural one wherein A1 powders (or articles) become coated with a protective coating of A1 oxide thru exposure to atmospheric air... 

If the reactive species in the chemical activation step initiates a radical chain with a chain length CL, then the overall quantum yield based on the ultimate product is X CL, and can be greater than 1. Photons are rather expensive reagents, and are only used when the product is of substantial value or when the overall quantum yield is large. Examples are the use of photoinitiators for the curing of coatings (a radical-polymerization process (Section 7.3.1)), and the transformation of complex molecules as medications. 

Chlorination of natural rubber (NR) is carried out with chlorine in carbon tetrachloride solution at 60-90°C to yield a chlorinated rubber containing about 65% chlorine, which corresponds to 3.5 chlorine atoms per repeat unit. The process is complex and includes chlorine addition to the double bond, substitution at allylic positions, and cyclization. Chlorinated rubber has high moisture resistance and is resistant to most aqueous reagents (including mineral acids and bases). It is used in chemical- and corrosion-resistant paints, printing inks, and textile coatings. Bromination of butyl rubber is also practiced [Parent et al., 2002]. 

The CgQ surface coverage was determined to be 2.0 10 mol cm . The monolayer can be further modified with monomeric amine reagents, which demonstrates the potential of the self-assembly process for growing three-dimensional fullerene structures. Different surfaces such as quartz. Si-oxide [105] or ITO [102] were coated with multilayers of fullerene up to stacks of 9 layers. An imidirectional electron transfer is possible across the fullerene mulhlayers [102]. Not only can multiple layers of fullerenes be connected to a certain surface but amino-functionalized can also serve as a linker between two different surfaces. 3-Aminopropyl-tethered glass plates could be linked via a Cgg layer to 3-aminopropyl covered zeolite crystals [106]. 

---