Reactive chemistry, elimination

The combination of an anionic and a pericyclic process has found broad application in synthetic organic chemistry. In these transformations, a primary addition is frequently followed by an elimination to give a reactive intermediate, which is then... 

The most important contributions in this area, however, directly related to bond activation chemistry, and, undoubtedly triggered by theoretical considerations along the lines of Figure 1, were reported by Whitesides and coworkers in 1986 and 1988 [11]. It was shown that the bent, bisphosphine-coordinated platinum chelate complex [(dcpe)Pt(O)] (9) (dcpe = bis(dicyclohexylphosphino)ethane), which could be generated thermally as a "hot" reactive intermediate by reductive elimination of neopentane from its ris-neopentylhydride Pt(II) precursor at around 60-70°C in solution, was able to activate C-H bonds, even of unactivated alkanes. 

The gas-phase reaction of cationic zirconocene species, ZrMeCp2, with alkenes and alkynes was reported to involve two major reaction sequences, which are the migratory insertion of these unsaturated hydrocarbons into the Zr-Me bond (Eq. 3) and the activation of the C-H bond via er-bonds metathesis rather than /J-hydrogen shift/alkene elimination (Eq. 4) [130,131]. The insertion in the gas-phase closely parallels the solution chemistry of Zr(R)Cp2 and other isoelec-tronic complexes. Thus, the results derived from calculations based on this gas-phase reactivity should be correlated directly to the solution reactivity (vide infra). 

Many issues in one management area are bound to affect performance in other areas. For example, an inherent safety review may propose a change in the process chemistry that will allow a definite reduction in chemical reactivity hazards, perhaps by eliminating a reactive intermediate. Such changes will have to fit with product quality requirements, and the customer may need to be included in the process of changing to the inherently safer alternative. Effective communication among all parts of the management team will avoid many problems and help identify what works best. 

Industrially this diene is made the same way as ethylidenenorbomene from butadiene and ethene, but now isomerisation to 2,4-hexadiene should be prevented as the polymerisation should concern the terminal alkene only. In both systems nickel or titanium hydride species react with the more reactive diene first, then undergo ethene insertion followed by (3-hydride elimination. Both diene products are useful as the diene component in EPDM rubbers (ethene, propene, diene). The nickel hydride chemistry with butadiene represents one of the early examples of organometallic reactions studied in great detail [22] (Figure 9.14). 

Post-crosslinkable and substrate reactive polymers are widely used to Improve water and solvent resistance, strength, substrate adhesion and block resistance In binders, adhesives and coatings. The surprisingly rich chemistry of a new class of functional monomers (eg. 1 and 2) related to standard amide/aldehyde (amlnoplast) condensates, but which eliminate aldehyde emissions, was elucidated by monomeric model and mechanistic studies and discussed In the preceeding paper (1). Results with these monomers In copolymer systems are reported here. 

Over the past two decades, important contributions to the chemistry of thiocarbonyl ylides were made by Huisgen et al. (27). By carrying out the reaction of thiobenzophenone with diazomethane at low temperature, formation of 2,5-dihydro-l,3,4-thiadiazole (15) with subsequent elimination of N2 was established as the route to the reactive thiobenzophenone (S)-methylide (16) (17,28). In the absence of intercepting reagents, 16 undergoes electrocyclization to give 17 or head-to-head dimerization to yield 1,4-dithiane 18 (Scheme 5.3). 

---