INDEX radiation

Wave vector of a scattered radiation (index f for final)... 

Stability class is determined as a function of wind speed and the net radiation index and is listed in Table III. The net radiation index ranges from 4 to —2. An index of 4 is given to the highest positive net radiation, which is radia-... 

Ifthe total cloud cover is lO/lOand the ceiling is less than 7000 ft, use net radiation index equal to 0 (whether day or night). 

Use the net radiation index in Table HI corresponding to the modified insolation class number. 

Photo courtesy of OSHA website, www.osha.gov/SLTC/radiation/index.html... 

In order to maintain high energy efficiency and ensure a long service life of the materials of construction in the combustion chamber, turbine and jet nozzle, a clean burning flame must be obtained that minimizes the heat exchange by radiation and limits the formation of carbon deposits. These qualities are determined by two procedures that determine respectively the smoke point and the luminometer index. 

Up to this point, we have calculated the linear response of the medium, a polarization oscillating at the frequency m of the applied field. This polarization produces its own radiation field that interferes with the applied optical field. Two familiar effects result a change in tlie speed of the light wave and its attenuation as it propagates. These properties may be related directly to the linear susceptibility The index of... 

Figure 10.3 Schematic illustration showing the bending of light and the decrease in wavelength as the radiation passes from a vacuum to a medium of refractive index h.

Under the same conditions. Maxwell s theory of radiation shows that the refractive index and the relative dielectric constant are simply related by... 

Figure 3.18 Total reflection of radiation in a medium of refractive index 2 by a thin film of refractive index wj, where 2...

The major use of vinylpyrrohdinone is as a monomer in manufacture of poly(vinylpyrrohdinone) (PVP) homopolymer and in various copolymers, where it frequendy imparts hydrophilic properties. When PVP was first produced, its principal use was as a blood plasma substitute and extender, a use no longer sanctioned. These polymers are used in pharmaceutical and cosmetic appHcations, soft contact lenses, and viscosity index improvers. The monomer serves as a component in radiation-cured polymer compositions, serving as a reactive diluent that reduces viscosity and increases cross-linking rates (see... 

Source sampling of particulates requites isokinetic removal of a composite sample from the stack or vent effluent to determine representative emission rates. Samples are coUected either extractively or using an in-stack filter EPA Method 5 is representative of extractive sampling, EPA Method 17 of in-stack filtration. Other means of source sampling have been used, but they have been largely supplanted by EPA methods. Continuous in-stack monitors of opacity utilize attenuation of radiation across the effluent. Opacity measurements are affected by the particle size, shape, size distribution, refractive index, and the wavelength of the radiation (25,26). 

Optical Properties. Teflon FEP fluorocarbon film transmits more ultraviolet, visible light, and infrared radiation than ordinary window glass. The refractive index of FEP film is 1.341—1.347 (74). 

Alkylated aromatics have excellent low temperature fluidity and low pour points. The viscosity indexes are lower than most mineral oils. These materials are less volatile than comparably viscous mineral oils, and more stable to high temperatures, hydrolysis, and nuclear radiation. Oxidation stabihty depends strongly on the stmcture of the alkyl groups (10). However it is difficult to incorporate inhibitors and the lubrication properties of specific stmctures maybe poor. The alkylated aromatics also are compatible with mineral oils and systems designed for mineral oils (see Benzene Toulene Xylenes and ethylbenzene). ... 

Additions to the PLM include monochromatic filters or a monochromator to obtain dispersion data (eg, the variation in refractive index with wavelength). By the middle of the twentieth century, ultraviolet and infrared radiation were used to increase the identification parameters. In 1995 the FTIR microscope gives a view of the sample and an infrared absorption pattern on selected 100-p.m areas (about 2—5-ng samples) (37). 

---