Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

277-Pyrrole, 1-oxides, 1,3-dipolar cycloaddition

Pyrrole 1-oxides are known they undergo 1,3-dipolar cycloaddition with DMAD and with A-phenylmaleimide (80TL1833). [Pg.84]

A family of interesting polycychc systems 106 related to pyrrolidines was obtained in a one-pot double intermolecular 1,3-dipolar cycloaddition, irradiating derivatives of o-allyl-sahcylaldehydes with microwaves in toluene for 10 min in presence of the TEA salt of glycine esters [71]. A very similar approach was previously proposed by Bashiardes and co-workers to obtain a one-pot multicomponent synthesis of benzopyrano-pyrrolidines 107 and pyrrole products 108 (Scheme 37). The latter cycloadducts were obtained when o-propargylic benzaldehydes were utihzed instead of o-allyhc benzalde-hydes, followed by in situ oxidation [72]. [Pg.234]

Dipolar cycloaddition reaction of azomethine ylides to alkynes or alkenes followed by oxidation is one of the standard methods for the preparation of pyrroles.54 Recently, this strategy has been used for the preparation of pyrroles with CF3 or Me3Si groups at the (3-positions.55 Addition of azomethine ylides to nitroalkenes followed by elimination of HN02 with base gives pyrroles in 96% yield (Eq. 10.48).56... [Pg.338]

Pyrrolyl)-4,5-dihydroisoxazole derivatives 402 have been synthesized (Scheme 1.48) in good yields (66%-78%) by regioselective 1,3-dipolar cycloaddition of nitrile oxides to 1-phenylsulfony 1-1,3-dienes, followed by Barton-Zard pyrrole annulation using ethyl isocyanoacetate anion (444). [Pg.85]

Dipolar cycloaddition of nitrile oxide 425 with allyl bromide followed by hydrogenation of dihydroisoxazole derivative 426 (Scheme 1.54) gives a pyrrol-substituted steroid derivative 427 (466). [Pg.92]

A study of the regioselectivity of the 1,3-dipolar cycloaddition of aliphatic nitrile oxides with cinnamic acid esters has been published. AMI MO studies on the gas-phase 1,3-dipolar cycloaddition of 1,2,4-triazepine and formonitrile oxide show that the mechanism leading to the most stable adduct is concerted. An ab initio study of the regiochemistry of 1,3-dipolar cycloadditions of diazomethane and formonitrile oxide with ethene, propene, and methyl vinyl ether has been presented. The 1,3-dipolar cycloaddition of mesitonitrile oxide with 4,7-phenanthroline yields both mono-and bis-adducts. Alkynyl(phenyl)iodonium triflates undergo 2 - - 3-cycloaddition with ethyl diazoacetate, Ai-f-butyl-a-phenyl nitrone and f-butyl nitrile oxide to produce substituted pyrroles, dihydroisoxazoles, and isoxazoles respectively." 2/3-Vinyl-franwoctahydro-l,3-benzoxazine (43) undergoes 1,3-dipolar cycloaddition with nitrile oxides with high diastereoselectivity (90% de) (Scheme IS)." " ... [Pg.460]

The auxihary acrylates 161 and 162 have been used in 1,3-dipolar cycloadditions with nitrile oxides. The camphor-derived acrylate 161 underwent a 1,3-dipolar cycloaddition with benzonitrile oxide with up to 56% de (Scheme 12.51) (263). The auxiliary in acrylate 162 is derived from naturally occurring L-quebrachitol, and provided an effective shielding of the re-face of the alkene in the reaction with benzonitrile oxide, as 90% de was obtained (273). Compound 163 was used in a reaction with the nitrone 1-pyrrole-1-oxide, and the reaction proceeded to give a complex mixture of products (274). [Pg.853]

Dipolar cycloaddition of 4-arylmethyleneisoxazol-5-ones 794 and 2-methyl-4-phenyl-5(4//)-oxazolone 795 leads to pyrrole-3-carboxyhc acids that have been isolated as hydroxamates 796. The authors carried out this cycloaddition-nitrile oxide addition as a one-pot reaction (Scheme 7.243). ... [Pg.289]

The [,4 + 2] cycloaddition of dienophiles with 1-substituted pyrroles is also a reversible reaction, which has been utilized in the synthesis of 3,4-disubstituted pyrroles (b-77MI305oq) and, via the initial reaction of the pyrrole with benzyne, for the synthesis of isoindoles (81 AHC(29>341). The retro-reaction can be controlled and aided by a 1,3-dipolar cycloaddition of the intermediate adduct with benzonitrile oxide (74TL2163, 76RTC67) (Scheme 61). [Pg.262]

Huisgen and coworkers have also described the cycloaddition behavior of the munchnones , unstable mesoionic A2-oxazolium 5-oxides with azomethine ylide character.166 Their reactions closely parallel those of the related sydnones. These mesoionic dipoles are readily prepared by cyclodehydration of N-acyl amino acids (216) with reagents such as acetic anhydride. The reaction of munchnones with alkynic dipolarophiles constitutes a pyrrole synthesis of broad scope.158-160 1,3-Dipolar cycloaddition of alkynes to the A2-oxazolium 5-oxide (217), followed by cycloreversion of carbon dioxide from the initially formed adduct (218), gives pyrrole derivative (219 Scheme 51) in good yield. Cycloaddition studies of munchnones with other dipolarophiles have resulted in practical, unique syntheses of numerous functionalized monocyclic and ring-annulated heterocycles.167-169... [Pg.1097]

AMI calculations have been used to explain the regioselectivities of the intermolecular asymmetric 1,3-dipolar cycloadditions of 2,2-dimethyl-3,4-dihydro-2//-pyrrole A-oxides with chiral a, /i-unsaturatcd esters.96 MO calculations have shown that only in-plane aromaticity is operating in transition structures+associated with the... [Pg.442]

A number of complex heterocycles have been assembled using dipolar cycloadditions (Fig. 6). The Affymax group [32] published an approach to the synthesis of tetrasubsti-tuted pyrrolidines by the reaction of azomethine ylids with electron-deficient olefins. A similar approach was described by researchers at Monsanto however, the aldehyde component was bound to the resin instead of the amino acid [33]. Kurth and co-workers [34] described a route to 2,5-disubstituted tetrahydrofurans using a nitrile oxide cycloaddition as the key reaction. Mjalli et al. [35] synthesized highly substituted pyrroles using the dipolar cycloaddition of intermediate 5 with mono- or disubstituted acetylenes. [Pg.33]

Modifying the aldehyde function in the pyrroles 1162 into 1,3-dipoles 1163 (nitrone) and 1167 (nitrile oxide) furnished tricyclic heterocycles 1164 and 1168 via intramolecular 1,3-dipolar cycloaddition reactions (Scheme 226) <2000T3013>. None of the isomeric bridged product 1165 is produced despite the preference for that regiochem-istry in the intermolecular reaction. Generated in situ (from the oximes 1166) nitrile oxides 1167 cyclized spontaneously to the dihydroisooxazole 1168 in quantitative yield at room temperature. [Pg.209]

Caldarelli et al. (240) have recently reported a five-step synthesis of substituted p)Trole libraries L22 and L23 using solid-supported reagents and scavengers. The synthesis involved oxidation of benzyl alcohols Mi to aldehydes (step a, Fig. 8.46), Henry reaction of aldehydes 8.91 with nitroalkanes M2 (step b), and acylation and elimination of nitroalcohols 8.93 (steps c and d) to give the nitrostyrenes 8.94, which were subjected to 1,3-dipolar cycloaddition with an isocyanoacetate (step e) to give the pyrroles 8.95. N-alkylation of these pyrroles with alkyl halides (step f) and final library-from-a-library hydrolysis/decarboxylation of L22 gave a library of trisub-stituted pyrroles L23 (step g. Fig. 8.46). [Pg.395]

An example of a third-generation cycloadduct 187 was synthesized via alternating 1,3-dipolar cycloaddition and oxidation steps starting from 3,4-dihydro-2//-pyrrole 1-oxide and furan-2(5//)-one (Scheme 44) <1997T2979>. [Pg.397]

Michael addition has been applied to the formation of cyclopropanic systems. Thus, the addition of phosphonate carbanions generated by LDA in THF, by NaH in THF, by thallium(I) ethoxide in refluxing THF, or by electrochemical technique to oc,P-unsaturated esters provides a preparation of substituted 2-(alkoxycarbonyl)cyclopropylphosphonates in moderate to good yields via a tandem Michael addition-cyclization sequence (Scheme 8.47). The cyclopropanation has also been achieved via oxidation with iodine in the presence of KF-AI2O3. Nitrile ylides prepared from acyl chlorides and diethyl isocyanomethylphosphonate in the presence of Et3N react with methyl acrylates by a 1,3-dipolar cycloaddition to give phosphoryl pyrrolines or pyrroles. ... [Pg.446]

The regioselective, Jt-extended pyrrole-fused porphyrinoids 13 have been prepared via the 1,3-dipolar cycloaddition ofmeso-alkylidene(benzi)-porphyrins (14CC9277) repeated cycloadditions, followed by oxidation-reduction of these pentaporphyrins gave Jt-extended porphyrin analogs. [Pg.580]

Acetylenic sulfones are reactive dipolarophiles. 1,3-Dipolar cycloaddition with nitrile oxide gave ester-linked isoxazoles (Scheme 11.47). However, the cycloadducts were cleaved from the resin with the sulfone moiety under alkaline hydrolysis. The method was applied later to the 1,3-dipolar cycloaddition reaction to prepare a wide selection of heterocycles, such as pyrroles, pyrazoles, 1,2,3-triazoles, and isoxazoles. " ... [Pg.376]


See other pages where 277-Pyrrole, 1-oxides, 1,3-dipolar cycloaddition is mentioned: [Pg.468]    [Pg.64]    [Pg.426]    [Pg.220]    [Pg.116]    [Pg.314]    [Pg.16]    [Pg.468]    [Pg.250]    [Pg.246]    [Pg.111]    [Pg.113]    [Pg.272]    [Pg.206]    [Pg.1504]    [Pg.28]    [Pg.192]    [Pg.356]    [Pg.398]    [Pg.142]    [Pg.267]   
See also in sourсe #XX -- [ Pg.334 ]




SEARCH



2/7-Pyrrole 1-oxides, 1,3-dipolar cycloaddition with DMAD

Cycloaddition oxide

Cycloadditions oxidative

Oxidative cycloaddition

Pyrrole oxidation

Pyrroles cycloaddition

Pyrroles cycloadditions

Pyrroles oxidation

© 2024 chempedia.info