Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Pyridines catalytic

Nickel-bpy and nickel-pyridine catalytic systems have been applied to numerous electroreductive reactions,202 such as synthesis of ketones by heterocoupling of acyl and benzyl halides,210,213 addition of aryl bromides to activated alkenes,212,214 synthesis of conjugated dienes, unsaturated esters, ketones, and nitriles by homo- and cross-coupling involving alkenyl halides,215 reductive polymerization of aromatic and heteroaromatic dibromides,216-221 or cleavage of the C-0 bond in allyl ethers.222... [Pg.486]

The absence of a reactirai between the magnesium alkyl complex and the heterocycles is noteworthy due to the precedent for the nucleophilic addition of calcium alkyls to pyridine and substituted pyridines. Catalytic dearomatization and hydrosilylation of these heterocycles employing magnesium hydrides and magnsium alkyls as precatalysts have yet to be reported. Under catalytic craiditions the observed decomposition of the magnesium intermediates at elevated temperatures may be responsible for the lack of catalytic turnover. [Pg.222]

The oxidative coupling of toluene using Pd(OAc)2 via />-tolylmercury(II) acetate (428) forms bitolyl[384]. The aryl-aryl coupling proceeds with copper and a catalytic amount of PdCl2 in pyridine[385]. Conjugated dienes are obtained by the coupling of alkenylmercury(II) chlorides[386]. [Pg.82]

Alkoxythiazoles are prepared by heterocyclization (274, 462). The Williamson method using catalytic amounts of KI and cupric oxide is also possible (278. 288, 306). 5-Acetoxy-4-alkenylthiazoles are obtained by treatment of 242 with acetyl chloride and triethylamine or with acetic anhydride and pyridine (450). Similarly, the reaction of diphenylketene with 242 affords 5-acyloxy-4-alkenylthiazoles (243) (Scheme 120) (450). The readiness of these o-acetylations suggests that 4-alkylidene thiazoline-5-one might be in equilibrium with 4-alkenyl-5-hydroxythiazoles (450). [Pg.436]

The alkylation of pyridine [110-86-1] takes place through nucleophiUc or homolytic substitution because the TT-electron-deficient pyridine nucleus does not allow electrophiUc substitution, eg, Friedel-Crafts alkylation. NucleophiUc substitution, which occurs with alkah or alkaline metal compounds, and free-radical processes are not attractive for commercial appHcations. Commercially, catalytic alkylation processes via homolytic substitution of pyridine rings are important. The catalysts effective for this reaction include boron phosphate, alumina, siHca—alurnina, and Raney nickel (122). [Pg.54]

In Europe, where an abundant supply of anthracene has usually been available, the preferred method for the manufacture of anthraquinone has been, and stiU is, the catalytic oxidation of anthracene. The main problem has been that of obtaining anthracene, C H q, practically free of such contaminants as carbazole and phenanthrene. Many processes have been developed for the purification of anthracene. Generally these foUow the scheme of taking the cmde anthracene oil, redistilling, and recrystaUizing it from a variety of solvents, such as pyridine (22). The purest anthracene may be obtained by azeotropic distillation with ethylene glycol (23). [Pg.421]

These precursors are prepared by reaction of fuming nitric acid in excess acetic anhydride at low temperatures with 2-furancarboxaldehyde [98-01-1] (furfural) or its diacetate (16) followed by treatment of an intermediate 2-acetoxy-2,5-dihydrofuran [63848-92-0] with pyridine (17). This process has been improved by the use of concentrated nitric acid (18,19), as well as catalytic amounts of phosphoms pentoxide, trichloride, and oxychloride (20), and sulfuric acid (21). Orthophosphoric acid, -toluenesulfonic acid, arsenic acid, boric acid, and stibonic acid, among others are useful additives for the nitration of furfural with acetyl nitrate. Hydrolysis of 5-nitro-2-furancarboxyaldehyde diacetate [92-55-7] with aqueous mineral acids provides the aldehyde which is suitable for use without additional purification. [Pg.460]

The same strategy can be used to relate chemical reactivity, catalytic abiUty, and bioactivity (10) of pyridine compounds with their stmcture. [Pg.324]

Reduction. Quinoline may be reduced rather selectively, depending on the reaction conditions. Raney nickel at 70—100°C and 6—7 MPa (60—70 atm) results in a 70% yield of 1,2,3,4-tetrahydroquinoline (32). Temperatures of 210—270°C produce only a slightly lower yield of decahydroquinoline [2051-28-7]. Catalytic reduction with platinum oxide in strongly acidic solution at ambient temperature and moderate pressure also gives a 70% yield of 5,6,7,8-tetrahydroquinoline [10500-57-9] (33). Further reduction of this material with sodium—ethanol produces 90% of /ra/ j -decahydroquinoline [767-92-0] (34). Reductions of the quinoline heterocycHc ring accompanied by alkylation have been reported (35). Yields vary widely sodium borohydride—acetic acid gives 17% of l,2,3,4-tetrahydro-l-(trifluoromethyl)quinoline [57928-03-7] and 79% of 1,2,3,4-tetrahydro-l-isopropylquinoline [21863-25-2]. This latter compound is obtained in the presence of acetone the use of cyanoborohydride reduces the pyridine ring without alkylation. [Pg.390]

Organic amines, eg, pyridine and piperidine, have also been used successfully as catalysts in the reactions of organosilanes with alcohols and silanols. The reactions of organosilanes with organosilanols lead to formation of siloxane bonds. Nickel, zinc, and tin also exhibit a catalytic effect. [Pg.26]

Esters derived from the primary alcohols are the most stable and those derived from the tertiary alcohols are the least stable. The decomposition temperature is lower in polar solvents, eg, dimethyl sulfoxide (DMSO), with decomposition occurring at 20°C for esters derived from the tertiary alcohols (38). Esters of benzyl xanthic acid yield stilbenes on heating, and those from neopentyl alcohols thermally rearrange to the corresponding dithiol esters (39,40). The dialkyl xanthate esters catalytically rearrange to the dithiol esters with conventional Lewis acids or trifluoroacetic acid (41,42). The esters are also catalytically rearranged to the dithiolesters by pyridine Ai-oxide catalysts (43) ... [Pg.363]

The Perkin reaction is of importance for the iadustrial production of coumarin and a number of modifications have been studied to improve it, such as addition of a trace of iodine (46) addition of oxides or salts of metals such as iron, nickel, manganese, or cobalt (47) addition of catalytic amounts of pyridine (48) or piperidine (49) replacement of sodium acetate by potassium carbonate (50,51) or by cesium acetate (52) and use of alkaU metal biacetate... [Pg.321]

Nitro groups in the pyridine ring are reduced to amines catalytically, but side reactions can occur with dithionite, leading to, e.g. (92) (75JOC3608). [Pg.213]

Reduction of isoindoles with dissolving metals or catalytically occurs in the pyrrole ring. Reduction of indolizine with hydrogen and a platinum catalyst gives an octahydro derivative. With a palladium catalyst in neutral solution, reduction occurs in the pyridine ring but in the presence of acid, reduction occurs in the five-membered ring (Scheme 38). Reductive metallation of 1,3-diphenylisobenzofuran results in stereoselective formation of the cw-1,3-dihydro derivative (Scheme 39) (80JOC3982). [Pg.61]

Isoxazole compounds can be converted into the corresponding isothiazoles by successive catalytic hydrogenation, sulfuration with phosphorus pentasulfide and oxidation with chloranil (72AHC(14)l, 75SST(3)541). 2,1-Benzisoxazoles give the 2,1-benzisothiazoles directly, by the action of phosphorus pentasulfide in either pyridine or molten imidazole (73SST(2)556, 77SST(4)339). (See also Chapter 4.16 for further discussion of these topics.)... [Pg.170]

In spirooxaziridines like (114), /3-scission proceeds with ring opening. Stoichiometric amounts of iron(II) salt in acidic solution lead to the dicarboxylic acid derivative (115). The radical undergoes some interesting reactions with added unsaturated compounds. For example, pyridine yields a mixture of 2- and 4-alkylation products in 80% yield. Catalytic amounts of iron(II) ion are sufficient here since the adduct of the radical with pyridine is oxidized by iron(III) ion to the final product (116), thus regenerating iron(II) ion (68TL5609). [Pg.211]

Sulfonamides (R2NSO2R ) are prepared from an amine and sulfonyl chloride in the presence of pyridine or aqueous base. The sulfonamide is one of the most stable nitrogen protective groups. Arylsulfonamides are stable to alkaline hydrolysis, and to catalytic reduction they are cleaved by Na/NH3, Na/butanol, sodium naphthalenide, or sodium anthracenide, and by refluxing in acid (48% HBr/cat. phenol). Sulfonamides of less basic amines such as pyrroles and indoles are much easier to cleave than are those of the more basic alkyl amines. In fact, sulfonamides of the less basic amines (pyrroles, indoles, and imidazoles) can be cleaved by basic hydrolysis, which is almost impossible for the alkyl amines. Because of the inherent differences between the aromatic — NH group and simple aliphatic amines, the protection of these compounds (pyrroles, indoles, and imidazoles) will be described in a separate section. One appealing proj>erty of sulfonamides is that the derivatives are more crystalline than amides or carbamates. [Pg.379]

These rate constants are for the hydrolysis of cinnamic anhydride in carbonate buffer, pH 8.45, total buffer concentration 0.024 M, in the presence of the catalysts pyridine, A -methylimidazole (NMIM), or 4-dimethylaminopyridine (DMAP). In the absence of added catalyst, but the presence of buffer, the rate constant was 0.005 24 s . You may assume that only the conjugate base form of each catalyst is catalytically effective. Calculate the catalytic rate constant for the three catalysts. What is the catalytic power of NMIM and of DMAP relative to pyridine ... [Pg.308]


See other pages where Pyridines catalytic is mentioned: [Pg.150]    [Pg.481]    [Pg.30]    [Pg.101]    [Pg.95]    [Pg.26]    [Pg.150]    [Pg.481]    [Pg.30]    [Pg.101]    [Pg.95]    [Pg.26]    [Pg.421]    [Pg.2788]    [Pg.112]    [Pg.128]    [Pg.101]    [Pg.517]    [Pg.179]    [Pg.328]    [Pg.186]    [Pg.70]    [Pg.81]    [Pg.177]    [Pg.207]    [Pg.239]    [Pg.710]    [Pg.586]    [Pg.262]    [Pg.270]    [Pg.493]    [Pg.709]    [Pg.717]    [Pg.742]   
See also in sourсe #XX -- [ Pg.15 , Pg.161 , Pg.164 ]




SEARCH



Bromination using catalytic pyridine

Hydrogenation, catalytic pyridine

Pyridine catalytic action

Pyridine, 2-ethyl-, catalytic synthesis

Pyridines, 2-alkyl catalytic synthesis

© 2024 chempedia.info