Pyridine thiourea

Oxygen can be transferred from the arene oxides to nitrogen-, sulfur-, or phosphorus-containing substrates like pyridine, thiourea, N-methyl-benzothiazol-2-thione, thioacetamide, thiosemicarbazide, thiols, thio ethers, triphenylphosphine,21,160,161 etc. Parent hydrocarbons are formed as products.162 Thus the dimethoxycarbonyl oxide 269 on heating with pyridine produces 9,10-dimethoxycarbonylphenanthrene (270). The reaction of 1 or its... 

The zwitterionic iodonium phenolate 253 is photochemically reactive and a variety of products can be obtained depending upon the substrate in which the reactions are carried out. The mechanism of formation of these products could be an electrophilic reaction of the iodonium species or could involve fission of the I—C bond to yield the phenolate zwitterion 254, which itself could undergo electrophilic reactions. Regardless of the route, addition of 254 to alkenes yields 255, to aUtynes gives 256 and to arenes produces the arylated products 257. Pyridine, thiourea, phenyliminobenzoxathiole and phenyl isocyanate also act as addends. ... 

Corrosion inhibitors (e.g. pyridine, thiourea, and phytic acid) adsorbed on the surface of Mg alloys to slow down the dissolution of Mg ". They also form complexes with Mg " to stabilize the solution and control the conversion layer formation rate. 

Bromo-4-piperidone hydrochloride condensed with thiourea 3 days at 20°C give the 2-amino-4,5,6,7-tetrahydrothiazolo[5,4c]pyridine (119) (Scheme 55) (648). 

The synthesis of these disubstituied thioureas takes place in three steps. First the alkyl bromide is prepared by the action of hydrobromic acid on the corresponding alcohol (518). Then the dialkylcyanamide is obtained by treatment at 25°C with calcium cyanamide. The yields are of the order of 30 to 60%. Thioureas are obtained in a third step from the cyanamide by reaction at 40 C with HjS in the presence of pyridine. Yields ranged from 57 to 90% (518),... 

Furium. N[4-(5-Nitro-2-furanyl)-2-thia2olyl]acetamide, has demonstrated activity against baciUi and pathogenic enterobacteria (24). The product, prepared from thiourea and 2-bromo-l-(5-nitro-2-furanyl)ethanone followed by acetylation of the intermediate aminothia2ole with acetic anhydride in pyridine (25), is marketed in several countries for both human and veterinary use. 

Nitrogen nucleophiles used to diplace the 3 -acetoxy group include substituted pyridines, quinolines, pyrimidines, triazoles, pyrazoles, azide, and even aniline and methylaniline if the pH is controlled at 7.5. Sulfur nucleophiles include aLkylthiols, thiosulfate, thio and dithio acids, carbamates and carbonates, thioureas, thioamides, and most importandy, from a biological viewpoint, heterocycHc thiols. The yields of the displacement reactions vary widely. Two general approaches for improving 3 -acetoxy displacement have been reported. One approach involves initial, or in situ conversion of the acetoxy moiety to a more facile leaving group. The other approach utilizes Lewis or Brmnsted acid activation (87). 

The simplest [3 + 3] reactions in the pyridine series involve reaction of o-chloropyridinecarboxylic acid derivatives with three-atom fragments such as urea, thiourea(s), amidines and guanidines, e.g. (240) (241). Examples are known mainly in... 

The DPA ester is formed from the acid chloride in pyridine (40-96% yield). It is cleaved oxidatively by treatment with NBS followed by thiourea (40-88% yield). ... 

DCCI reacts with hydrazone derivatives or with the thiourea 83 to give nitrogen ylides such as 84 and hence by protonation 3-aminotriazolopyridines (88CC506, 93JCS(P1)705). A solution of iodine in pyridine reacts with propional... 

Direct measurements on metals such as iron, nickel and stainless steel have shown that adsorption occurs from acid solutions of inhibitors such as iodide ions, carbon monoxide and organic compounds such as amines , thioureas , sulphoxides , sulphidesand mer-captans. These studies have shown that the efficiency of inhibition (expressed as the relative reduction in corrosion rate) can be qualitatively related to the amount of adsorbed inhibitor on the metal surface. However, no detailed quantitative correlation has yet been achieved between these parameters. There is some evidence that adsorption of inhibitor species at low surface coverage d (for complete surface coverage 0=1) may be more effective in producing inhibition than adsorption at high surface coverage. In particular, the adsorption of polyvinyl pyridine on iron in hydrochloric acid at 0 < 0 -1 monolayer has been found to produce an 80% reduction in corrosion rate . 

Carbodiimides have been prepared by desulfurization of thioureas by metal oxides, by sodium hypochlorite,4 or by ethyl chloroformate in the presence of a tertiary amine by halogena-tion of ureas or thioureas followed by dehydrohalogenation of the N,N -disubstituted carbamic chloride 8 and by dehydration of disubstituted ureas using -toluenesulfonyl chloride and pyridine.7 The method described above is a modification of that of Campbell and Verbanc. ... 

Salts of dithiocarbamic acid can be prepared by the addition of primary or secondary amines to carbon disulfide. This reaction is similar to 16-9. Hydrogen sulfide can be eliminated from the product, directly or indirectly, to give isothiocyanates (RNCS). Isothiocyanates can be obtained directly by the reaction of primary amines and CS2 in pyridine in the presence of DCC. ° In the presence of diphenyl phosphite and pyridine, primary amines add to CO2 and to CS2 to give, respectively, symmetrically substituted ureas and thioureas ... 

High density brine completion fluids also often require the use of corrosion inhibitors (8,9). Blends of thioglycolates and thiourea alkyl, alkenyl, or alkynyl phosphonium salts thiocyanate salts mercaptoacetic acid and its salts and the reaction products of pyridine or pyrazine derivatives with dicarboxylic acid monoanhydrides have been used as high density brine corrosion inhibitors. 

The earliest NLO studies involving metal pyridyl complexes were reported by Frazier et al. in 1986 who investigated the SHG properties of various group 6 metal pyridyl carbonyls.63 Although most of the complexes tested show little or no activity, (6) and (7) have respective SHG efficiencies of 0.2 and 1.0 times ADP using a 1,064 nm laser.63 Shortly after, Calabrese and Tam reported SHG from the Re1 complex (8).64 Subsequent studies by Eaton and Tam et al.65,66 describe the preparation of inclusion compounds of various metal complexes with thiourea or tris-ort/ o-thymotide. Unfortunately, none of the complexes [W(CO)5L] (L = pyridine, py, or a 4-substituted py) produce SHG-active materials.65,66... 

Some 2-(chloromethyl) derivatives of kojic acid form quaternary salts with tertiary aliphatic amines80-86 and with thiourea.83 Quaternary pyridin-ium salts (LXII) were obtained by Looker and Okamoto81 from LX and LXI in dry pyridine. Water-insoluble derivatives of kojic acid could be rendered water-soluble by these quaternizations. 

---