Purification adsorbents

Purification. See also Impurities Refining Wastewater treatment Water purification adsorbents for, 7 612 adsorption processes for, 7 612-613 aminophenols, 2 660-661 benzoic acid, 3 627-628 of carbide-generated acetylene, 7 207-208... 

Liquid Purifications (adsorbate concentration in the feed <3% wt.) Adsorbent... 

Filterfold. [Bamebey Sutcliffe] Activated carbon air purification adsorbers. 

The enhanced concentration at the surface accounts, in part, for the catalytic activity shown by many solid surfaces, and it is also the basis of the application of adsorbents for low pressure storage of permanent gases such as methane. However, most of the important applications of adsorption depend on the selectivity, ie, the difference in the affinity of the surface for different components. As a result of this selectivity, adsorption offers, at least in principle, a relatively straightforward means of purification (removal of an undesirable trace component from a fluid mixture) and a potentially useflil means of bulk separation. 

Although most appHcations of fixed bed have multiple adsorber beds to treat continuous streams, batch operation using a single adsorber bed is an alternative. For purification appHcations, where one vessel can contain enough adsorbent to provide treatment for days, weeks, or even months, the cost savings and simplicity often justify the inconvenience of stopping adsorption treatment periodically for a short regeneration. 

Although chemisorbents are not used as extensively as physical adsorbents, a number of commercially significant processes employ chemisorption for gas purification. 

Recovery and Purification. The dalbaheptides are present in both the fermentation broth and the mycelial mass, from which they can be extracted with acetone or methanol, or by raising the pH of the harvested material, eg, to a pH of 10.5—11 for A47934 (16) (44) and A41030 (41) and actaplanin (Table 2) (28). A detailed review on the isolation of dalbaheptides has been written (14). Recovery from aqueous solution is made by ion pair (avoparcin) or butanol (teicoplanin) extraction. The described isolation schemes use ion-exchange matrices such as Dowex and Amberlite IR, acidic alumina, cross-linked polymeric adsorbents such as Diaion HP and Amberlite XAD, cation-exchange dextran gel (Sephadex), and polyamides in various sequences. Reverse-phase hplc, ion-exchange, or affinity resins may be used for further purification (14,89). 

Physica.1 Properties. Carbonyl sulfide [463-58-1] (carbon oxysulfide), COS, is a colorless gas that is odorless when pure however, it has been described as having a foul odor. Physical constants and thermodynamic properties are Hsted ia Table 1 (17,18). The vapor pressure has been fitted to an equation, and a detailed study has been made of the phase equiUbria of the carbonyl sulfide—propane system, which is important ia the purification of propane fuel (19,20). Carbonyl sulfide can be adsorbed on molecular sieves (qv) as a means for removal from propane (21). This approach has been compared to the use of various solvents and reagents (22). 

Polyethers are usually found in both the filtrate and the mycelial fraction, but in high yielding fermentations they are mosdy in the mycelium because of their low water-solubiUty (162). The high lipophilicity of both the free acid and the salt forms of the polyether antibiotics lends these compounds to efficient organic solvent extraction and chromatography (qv) on adsorbents such as siUca gel and alumina. Many of the production procedures utilize the separation of the mycelium followed by extraction using solvents such as methanol or acetone. A number of the polyethers can be readily crystallized, either as the free acid or as the sodium or potassium salt, after only minimal purification. 

Of the four commercial processes for the purification of carbon monoxide two processes are based on the absorption of carbon monoxide by salt solutions, the third uses either low temperature condensation or fractionation, and the fourth method utilizes the adsorption of carbon monoxide on a soHd adsorbent material. AH four processes use similar techniques to remove minor impurities. Particulates are removed in cyclones or by scmbbing. Scmbbing also removes any tars or heavy hydrocarbon fractions. Acid gases are removed by absorption in monoethanolamine, hot potassium carbonate, or by other patented removal processes. The purified gas stream is then sent to a carbon monoxide recovery section for final purification and by-product recovery. 

Chemical Applications. Cesium metal is used in carbon dioxide purification as an adsorbent of impurities in ferrous and nonferrous metallurgy (qv) it can be used as a scavenger of gases and other impurities. 

---