Protective clothing toxic chemicals handling

Most carrier-active compounds ate based on aromatic chemicals with characteristic odor. An exception is the phthalate esters, which are often preferred when ambient odor is objectionable or residual odor on the fabric caimot be tolerated. The toxicity of carrier-active compounds and of their ultimate compositions varies with the chemical or chemicals involved. The environment surrounding the dyeing equipment where carriers are used should always be weU-ventilated, and operators should wear protective clothing (eg, mbber gloves, aprons, and safety glasses or face shields, and possibly an appropriate respirator). Specific handling information can be obtained from the suppHer or manufacturer. 

A highly toxic chemical (e.g., a pesticide) may be used without causing harmful effect if it is handled with care and caution. Exposure to pesticides can be minimized by wearing protective clothing and equipment and by learning to handle pesticides carefully. If the exposure to the pesticide is low or even nil, the risk is reduced, even when handling highly toxic pesticides. 

Toxicity On exposure, chlorobenzenes are known to cause irritation to the skin, conjunctiva, and mucous membranes of upper respiratory tract. Prolonged and repeated exposure with liquid chlorobenzene causes skin burns. Acute exposure to chlorobenzenes causes drowsiness, incoordination, gait disturbances, and unconsciousness. In view of this, workers are advised to handle the chemical with proper protective clothing and under qualified supervision.122123... 

Laboratory safety is absolutely essential for any organization. The protection of human health is foremost when dealing with toxic chemicals. Proper protective clothing and equipment should be used by all who may be exposed to these chemicals. Correct storage and handling procedures should always be employed in the laboratory. Emergency plans should be developed and made aware to all involved in case of an accidental exposure. 

Toxicity of Tertiary Amine Cataiysts. The liquid tertiary aliphatic amines used as catalysts in the manufacture of polyurethanes can cause contact dermatitis and severe damage to the eye. Inhalation can produce moderate to severe irritation of the upper respiratory tracts and the limgs. Ventilation, protective clothing, and safety glasses are mandatory when handling these chemicals. 

Some of the surface preparation treatments use chemicals that have serious health effects, unless used with extreme caution. As with all chemicals, consult the Material Safety Data Sheet (MSDS) before using. Organic solvents must be handled with care because their use may raise a fire and/or toxic hazard. Read the material safety data sheet before handling. Acids and sodium hydroxide are aggressive (corrosive) chemicals. Always wear protective clothing and a face shield when using. Read material safety data sheets of all materials before using. Never add water directly to an acid always add acid to water slowly. 

Many chemical substances used in a laboratory are toxic to humans when ingested or inhaled. Precautions must be taken with these substances to keep them out of the mouth, nose, eyes, and the skin. It is important to wear protective clothing, gloves, and safety glasses when handling toxic or corrosive chemicals. 

Chemicals — storage, handling, transportation, spills, disposals, amounts used, labeling, toxicity or other harmful effects, warning signs, supervision, training, protective clothing and equipment, hazard communication requirements. 

Care and precautions In view of its potential toxicity, 2-nitropropane should be handled in the workplace as a potential human carcinogen. Strict chemical management should be observed at all levels. Industrial workers should be provided with approved personal respiratory protective devices and full-body clothing for protection against splashes. ... 

Chlorine is listed as a toxic and reactive highly hazardous chemical in Title 29 CFR Part 1910 of the U.S. Occupational Safety and Health Standards. The requirements for handling chlorine are well documented. Protective equipment is required to prevent inhalation and contact with eyes, skin, and clothing. Chlorine is often handled in confined areas to prevent accidental releases. These areas require continuous monitoring to detect chlorine leaks, air scrubbers. 

---