Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alcohol propylic

Glycerol ct-dichlorohydrin, sym-dichloroiso-propyl alcohol, 1,3-dichloro-2-hydroxypropane, CH2CI-CHOH-CH2C1. Colourless liquid with an ethereal odour b.p. 174-175" C. Prepared by passing dry HCl into glycerin containing 2% elhanoic acid at 100-1 lO C. Converted to x-epichlorohydrin by K.OH, Used as a solvent for cellulose nitrate and resins. [Pg.192]

The student will doubtless be aware of the fact that methyl, ethyl, n-propyl and iso propyl alcohols are completely miscible with water. The solubilities of the higher aloohols decrease progressively as the carbon content increases. The solubilities of all types of alcohols with five carbon atoms or more are quite small. For the isomeric butyl alcohols the solubilities (g. per 100 g. of water at 20°) are n-butyl, 8 iso-butyl, 23 scc.-butyl, 13 ierl.-butyl, completely miscible. [Pg.260]

Carry out the Lucas test with iso-propyl alcohol, n-butyl alcohol, scc.-butyl alcohol, cycZohexanol and iert.-butyl alcohol. Obtain an unknown alcohol from the instructor for test. [Pg.262]

Propionaldehyde. Use 34 g. (42-6 ml.) of n propyl alcohol, and a solution containing 56 g. of sodium chromate dihydrate, 300 ml. of water and 40 ml. of concentrated sulphuric acid. The experimental details are identical with those for n-butyraldehyde, except that the addition of the dichromate solution occupies 20 minutes, the temperature at the top of the column is not allowed to rise above 70-75°, and during the subsequent heating for 15 minutes the liquid passing over below 80° is collected the receiver must be cooled in ice. The yield of propionaldehyde, b.p. 47-50°, is 12 g. [Pg.321]

Lactic acid iso-Propyl alcohol tso-Propyl lactate... [Pg.381]

Place a mixture of 25 5 g. of n-valerio acid (Sections 111,83 and 111,84), 30 g. (37 -5 ml.) of dry n-propyl alcohol, 50 ml. of sodium-dried benzene and 10 g. (5-5 ml.) of concentrated sulphuric acid in a 250 ml. round-bottomed flask equipped with a vertical condenser, and reflux for 36 hours. Pour into 250 ml. of water and separate the upper layer. Extract the aqueous layer with ether, and add the extract to the benzene solution. Wash the combined extracts with saturated sodium bicarbonate solution until effervescence ceases, then with water, and dry with anhydrous magnesium sulphate. Remove the low boiling point solvents by distillation (use the apparatus of Fig. II, 13,4 but with a Claisen flask replacing the distilling flask) the temperature will rise abruptly and the fi-propyl n-valerate will pass over at 163-164°. The yield is 28 g. [Pg.387]

If desired, the alcohol may be identified as the 3 5-dinitrobenzoate (Section 111,27) it is then best to repeat the experiment on a larger scale and to replace the dilute hydrochloric acid by dilute sulphuric acid. It must, however, be pointed out that the reaction is not always so simple as indicated in the above equation. Olefine formation and rearrangement of the alcohol sometimes occur thus n-prop3 lamine yields n-propyl alcohol, isopropyl alcohol and propylene. [Pg.420]

Esters of the homologous acids are prepared by adding silver oxide in portions rather than in one lot to a hot solution or suspension of the diazo ketone in an anhydrous alcohol (methyl, ethyl or n-propyl alcohol) methanol is generally used and the silver oxide is reduced to metallic silver, which usually deposits as a mirror on the sides of the flask. The production of the ester may frequently be carried out in a homogeneous medium by treating a solution of the diazo ketone in the alcohol with a solution of silver benzoate in triethylamlne. [Pg.903]

What happens during hydrolysis is that the OH forms and the elemicin propyl alcohol drops out of solution and forms its own oil layer. Of course one won t see this because the solution is a big old brown mess, lousy with emulsion particles. Emulsions suck But can be dealt with effectively by adding a little acid or base, or filtration and the like. Anyway, after a little work up one gets some really pure phenylpropyl compound. And if Strike had Strike s way. Strike would have that OH stuck right on the middle (beta) carbon of the species. Work could then progress on using that OH to get an amphetamine (Sob Strike had so much about that subject that Strike was prepared to put in this book ). [Pg.51]


See other pages where Alcohol propylic is mentioned: [Pg.328]    [Pg.330]    [Pg.10]    [Pg.170]    [Pg.262]    [Pg.270]    [Pg.279]    [Pg.282]    [Pg.287]    [Pg.322]    [Pg.381]    [Pg.383]    [Pg.383]    [Pg.385]    [Pg.780]    [Pg.782]    [Pg.916]    [Pg.1012]    [Pg.1012]    [Pg.1045]    [Pg.279]    [Pg.693]    [Pg.989]    [Pg.989]    [Pg.3]    [Pg.20]    [Pg.37]    [Pg.51]    [Pg.65]    [Pg.66]    [Pg.141]    [Pg.164]    [Pg.165]    [Pg.166]    [Pg.174]    [Pg.198]    [Pg.199]    [Pg.231]    [Pg.233]    [Pg.249]   
See also in sourсe #XX -- [ Pg.372 ]




SEARCH



1-Propanol: Propyl alcohol

2- propyl carbonates protect alcohols

B-Propyl alcohol

H-Tetrafluoro-1 -Propyl Alcohol

Iso-Propyl alcohol

Iso-Propyl alcohol, recovery removal of peroxides

M-Propyl alcohol

Methyl alcohol propyl ether

Methyl ethyl-propyl alcohol

N-Propanol — Propyl alcohol

N-Propyl alcohol

N-Propyl alcohol, absolute

Normal Propyl Alcohol

Phenyl propyl alcohol

Propiolic propyl alcohol

Propionic aldehyde Propyl alcohols

Propyl Alcohol (C3H7OH)

Propyl Alcohol (C3II-OH)

Propyl acetate alcohol

Propyl alcohol conductivity

Propyl alcohol flash point

Propyl alcohol manufacture

Propyl alcohol toxicity

Propyl alcohol vapour pressure

Propyl alcohol viscosity

Propyl alcohol water miscibility

Propyl alcohol —

Propyl alcohol —

Sec-Propyl alcohol

W-Propyl alcohol

Wo-Propyl alcohol

© 2024 chempedia.info