Propanol flash point

Zirconium Tetra-n-propylate. Zirconium tetra- -propoxide [23519-77-9], TunipQ ]) mol wt 327.6, is a colorless soHd, melting point, 214°C (95). The commercial product contains about 28% Zr02 and propanol it is a yellow-brown Hquid, density, 65] = 1.05 g/mL solidification point below —70°C flammable, flash point below 21°C, soluble in hydrocarbons. [Pg.27]

Propanol is defined as a flammable Hquid. Its flash point is below 38°C. OSHA defines 1-propanol as hazardous according to 29 CFR 1910.1200 for the... [Pg.119]

The substitution of one hydroxyl radical for a hydrogen atom in propane produces propyl alcohol, or propanol, which has several uses. Its molecular formula is C3H7OH. Propyl alcohol has a flash point of 77°F and, like all the alcohols, bums with a pale blue flame. More commonly known is the isomer of propyl alcohol, isopropyl alcohol. Since it is an isomer, it has the same molecular formula as propyl alcohol but a different structural formula. Isopropyl alcohol has a flash point of 53 F. Its ignition temperamre is 850°F, while propyl alcohol s ignition temperature is 700 F, another effect of the different stmcture. Isopropyl alcohol, or 2-propanol (its proper name) is used in the manufacture of many different chemicals, but is best known as rubbing alcohol. [Pg.198]

Amino,2-methyl,1-propanol (AMP), also known as Isobutanolamine (IBA), (CH3)2CNH2CH2OH, MW = 89. Available as a 95% solution (AMP-95 ) from Angus Chemical Company. Sp. gr. = 0.942. Flash point = 87 °C/188 °F (PMCC). Boiling point = 329 °F. Suitable for short to medium steam-condensate pipe runs provided the operating pressure is at least 75 psig. A safe replacement for morpholine. Reasonable thermal stability. [Pg.518]

A flammable chemical substance is a solid, liquid, vapor, or gas that ignites easily and burns rapidly in air. Many of the flammable chemicals used in laboratories are flammable liquids and organic solvents. The vapors of these chemical substances form ignitable mixtures with air. Based on the flash points of these chemicals, classifications are made. The flash point of a chemical substance is defined as the lowest temperature at which a fuel-air mixture present above the surface of a liquid will ignite, if an ignition source is present. The common flammable chemical substances include, but are not restricted to, acetone, benzene, cyclohexane, ethanol, ethyl acetate, ethyl ether, gasoline, hexane, isopropyl alcohol, methanol, propanol, tetrahydro-furan and toluene, and xylene. [Pg.253]

AMINO-2-METHYL-1-PROPANOL (90% or less) (124-68-5) C4H NO Combustible liquid (flash point 153°F/67°C Fire Rating 2). Aqueous solution is a strong organic base. Violent reaction with strong oxidizers nitric acid. May form heat-sensitive explosive materials with digold ketenide. Incompatible with acids, acid... [Pg.58]

AMINO-l-PROPANOL (156-87-6) C3H9NO Combustible liquid (flash point 175°F/79°C). Violent reaction with strong oxidizers, strong acids, isopropyl percarbonate, nitrosyl perchlorate. Contact... [Pg.62]

EPOXY-l-PROPANOL or 2,3-EPOXYPROPANOL (556-52-5) C3H 02 The pure material or a solution in water is sensitive to moisture, light, and temperature it may polymerize when heated above room temperature. Combustible and polymerizable liquid (flash point 158°F/70°C). Reacts violently wiflt strong oxidizers. Contact with strong acids, bases, caustics, chemically active metals (aluminum, copper, zinc, etc.), metal salts, trichloroethylene, especially in the presence of heat, can cause polymerization or exothermic deconpo-sition. Incompatible with nitrates. Attacks some plastics, rubber, and coatings. [Pg.433]

METHYL-l-PROPANOL (78-83-1) C HioO (CH3)2CHCH,0H Highly flammable liquid. Forms explosive mixture with air [explosion limits in air (vol %) 1.2 to 11.0 flash point 82°F/28°C autoignition... [Pg.728]

AMINO-l-PROPANOL (156-87-6) Combustible liquid (flash point I75°F/79°C). Violent reaction with strong oxidizers, strong acids, isopropyl percarbonate, nitrosyl perchlorate. Incompatible with aldehydes, nonoxidizing mineral acids, cellulose nitrate (of high surface area), eresols. isocyanates, nitrates, nitric acid, organic anhydrides, phenols, sulfuric acid. Attacks aluminum, copper, zine. or their alloys, and galvanized steel. [Pg.90]

BUTANONE (78-93-3) Forms explosive mixture with air (flash point 30°F/—1°C also reported at 16°F/—9°C). Violent reaction with strong oxidizers, aldehydes, nitric acid, perchloric acid, potassium fcrt-butoxide, oleum. Incompatible with inorganic acids, aliphatic amines, ammonia, caustics, isocyanates, pyridines, chlorosulfonic acid. Able to form unstable peroxides in storage, or on contact with 2-propanol or hydrogen peroxide. Attacks some plastics. Flow or agitation of substance may generate electrostatic charges due to low conductivity. [Pg.215]

DIBROMO-l-PROPANOL PHOSPHATE or (2,3-DIBROMOPROPYL) PHOSPHATE (126-72-7) May be combustible (flash point >230 F/> 110°C). Incompatible with acids, bases, strong oxidizers. [Pg.392]

METHOXY-2-PROPANOL (107-98-2) Forms explosive mixture with air (flash point 90°F/32°C). Violent reaction with strong oxidizers, alkalis. Incompatible with aliphatic amines, boranes, sulfuric acid, nitric acid, perchloric acid, caustic materials, isocyanates. [Pg.758]

METHOXY-2-PROPANOL ACETATE (108-65-6) Forms explosive mixture with air (flash point 108°F/42°C cc). Unless inhibited, polymerization may occur avoid exposure to high temperatures, UV light, free-radical initiators. Strong oxidizers may cause fire and explosions. Reacts violently with sodium peroxide, uranium fluoride. Incompatible with strong acids, nitrates, oxidizers. Incompatible with sulfuric acid, nitric acid, caustics, aliphatic amines, isocyanates, boranes. [Pg.758]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...