2,2-dimethyl-1,3-propanediol

Propanediol-2,2-dimethyl dibenzoate. See Neopentyl glycol dibenzoate... 

Substrates that are sparingly soluble in water should be dissolved in a relatively nontoxic, water-miscible solvent, such as ethanol, acetone, 1,2-propanediol, dimethyl sulfoxide, dimethylformamide or 2-methoxyethanol, prior to addition to the culture. Alternatively, solubility can be enhanced by the addition of an emulsifying agent (e.g., Tweens) or by grinding crystalline substrates to micron-size particles. 

CAS 126-30-7 EINECS/ELINCS 204-781-0 Synonyms 1,3-Dihydroxy-2,2-dimethylpropane Dimethylolpropane 2,2-Dimethyl-1,3-propanediol Dimethyl trimethylene glycol Neopentylene glycol NPG Empirical CsHi202 Formula H0CH2C(CH3)2CH20H... 

Neopentyl glycol, or 2,2-dimethyl-1,3-propanediol [126-30-7] (1) is a white crystalline soHd at room temperature, soluble ia water, alcohols, ethers, ketones, and toluene but relatively iasoluble ia alkanes (1). Two primary hydroxyl groups are provided by the 1,3-diol stmcture, making this glycol highly reactive as a chemical intermediate. The gem-A methy configuration is responsible for the exceptional hydrolytic, thermal, and uv stabiUty of neopentyl glycol derivatives. 

The flexibiHty of the final film is partiy controUed by the ratio of aromatic to aHphatic dibasic acids. The esters of highly substituted polyols such as neopentyl glycol (NPG) (2,2-dimethyl-l,3-propanediol) [126-30-7] 1,4-dimethylolcyclohexane (cyclohexanedimethanol (CHDM)) [27193-23-3] ... 

Aliphatic Glycidyl Ethers. Aliphatic epoxy resins have been synthesized by glycidylation of difunctional or polyfunctional polyols such as a 1,4-butanediol, 2,2-dimethyl-l,3-propanediol (neopentyl glycol), polypropylene glycols, glycerol, trimethylolpropane, and pentaerythritol. 

Due to the differences in the values relative to any one system, conclusions cannot easily be drawn from the activation parameters listed in Table 3. However, an analysis of the results relative to 1,2-ethanediol, 2,2-dimethyl-l,3-propanediol, 1,5-pentanediol, 1,10-decanediol and diethylene glycol shows that a slight difference can be observed between aromatic and aliphatic acids the activations enthalpies and entropies are in the ranges 70, 100 kJ mol"1 and -SO, -130 J K"1 mol-1 for aromatic acids, and in the ranges 50, 70 kJ mol"1 and -200, -100 J K"1 mol-1 for the aliphatic acids. 

Several authors studied the influence of substituents on activation parameters. Bad-dar et al.315 who studied the polyesterification of y-arylitaconic anhydrides and adds with 1,2-ethanediol found that in the non-catalyzed reaction a p-methoxy substituent decreases both the activation enthalpy and the entropy whereas an increase is observed with a p-chloro substituent. On the other hand, Huang et al., who studied the esterification of 2,2-dimethyl-l,3-propanediol with benzoic, butanedioic, hexanedioic, decanedioic and o-phthalic add found the same values since the activation enthalpy is 64 kJ mol-1 for the first reaction and 61 kJ mol-1 for the others. 

Acetalization or ketalization with silylated glycols or 1,3-propanediols and the formation of thioketals by use of silylated 1,2-ethylenedithiols and silylated 2-mer-captoethylamines have already been discussed in Sections 5.1.1 and 5.1.5. For cyclizations of ketones such as cyclohexanone or of benzaldehyde dimethyl acetal 121 with co-silyl oxyallyltrimethylsilanes 640 to form unsaturated spiro ethers 642 and substituted tetrahydrofurans such as 647, see also Section 5.1.4. (cf. also the reaction of 654 to give 655 in Section 5.2) Likewise, Sila-Pummerer cyclizations have been discussed in Chapter 8 (Schemes 8.17-8.20). 

Dynamic light-scattering experiments or the analysis of some physicochemical properties have shown that finite amounts of formamide, A-methylformamide, AA-dimethyl-formamide, ethylene glycol, glycerol, acetonitrile, methanol, and 1,2 propanediol can be entrapped within the micellar core of AOT-reversed micelles [33-36], The encapsulation of formamide and A-methylformamide nanoclusters in AOT-reversed micelles involves a significant breakage of the H-bond network characterizing their structure in the pure state. Moreover, from solvation dynamics measurements it was deduced that the intramicellar formamide is nearly completely immobilized [34,35],... 

The key step in the synthesis of A-ring fragment 50 [56] is the chelation-controlled addition of allylstannane 53 to aldehyde 52, which sets the C7 stereocenter and introduces the C8 gem-dimethyl moiety. Aldehyde 52 is itself prepared from 1,3-propanediol using the author s protocol for titanium-catalyzed enantioselective allylstannation [57], which sets the C5 stereocenter, followed by chelation-controlled Mukaiyama aldol addition [58] to establish the C3 stereocenter (Scheme 5.6). 

A two-stage process for the hydroformylation of butadiene to give good yields of a desired product—1,6-hexanediol—has been described (100). The first stage employed [(C6H5)3P]2Rh(CO)Br and excess triphen-ylphosphine as catalyst and reaction conditions of I20°C and 200 atm of 1/1 H2/CO in methanol as solvent. The principal product was 3-penten-l-al dimethyl acetal. This was treated with 1,3-propanediol to form a cyclic acetal, then hydroformylated with Co2(CO)8 and dodecyl-9-phospha-9-bicyclononane at 170°C and 80-110 atm of 2/1 H2/CO. The product of... 

PTT is made by the melt polycondensation of PDO with either terephthalic acid or dimethyl terephthalate. The chemical structure is shown in Figure 11.1. It is also called 3GT in the polyester industry, with G and T standing for glycol and terephthalate, respectively. The number preceding G stands for the number of methylene units in the glycol moiety. In the literature, polypropylene terephthalate) (PPT) is also frequently encountered however, this nomenclature does not distinguish whether the glycol moiety is made from a branched 1,2-propanediol or a linear 1,3-propanediol. Another abbreviation sometimes used in the literature is PTMT, which could be confused with poly(tetramethylene terephthalate),... 

---