Polyurethane elastomers cross-linking

Thermoset polyurethanes are cross-linked polymers, which are produced by casting or reaction injection molding (RIM). For cast elastomers, TDI in combination with 3,3,-dichloro-4,4,-diphen5lmethanediamine (MOCA) are often used. In the RIM technology, aromatic diamine chain extenders, such as diethyltoluenediamine (DETDA), are used to produce poly(urethane ureas) (47), and replacement of the polyether polyols with amine-terminated polyols produces polyureas (48). The aromatic diamines are soluble in the polyol and provide fast reaction rates. In 1985, internal mold release agents based on zinc stearate compatibilized with primary amines were introduced to the RIM process to minimize mold preparation and scrap from parts tom at demold. Some physical properties of RIM systems are listed in Table 7. 

Thermoset polyurethanes are cross-linked polymers, which are produced by casting or RIM. For cast elastomers, TDI in combination with 3,3 -dichloro-4,4 -diphenylmethanediamine (MOCA) are often used. 

The Hquid monomers are suitable for bulk polymerization processes. The reaction can be conducted in a mold (casting, reaction injection mol ding), continuously on a conveyor (block and panel foam production), or in an extmder (thermoplastic polyurethane elastomers and engineering thermoplastics). Also, spraying of the monomers onto the surface of suitable substrates provides insulation barriers or cross-linked coatings. 

An entirely new concept was iatroduced iato mbber technology with the idea of "castable" elastomers, ie, the use of Hquid, low molecular-weight polymers that could be linked together (chain-extended) and cross-linked iato mbbery networks. This was an appealing idea because it avoided the use of heavy machinery to masticate and mix a high viscosity mbber prior to mol ding and vulcanization. In this development three types of polymers have played a dominant role, ie, polyurethanes, polysulftdes, and thermoplastic elastomers. 

Where the polyurethane comprises <30% of the blend, the polyurethane remains in discrete droplets within the polyacetal matrix. In this range the particle size and particle size distribution of the elastomer particles are of importance. Where the elastomer component is in excess of 30%, interpenetrating polymer networks exist in the sense that there are two interpenetrating continuous phases (as opposed to two cross-linked interpenetrating polymer systems). 

The undesirable properties of thermoplastic polyurethane elastomer, i.e., softening at high temperatures and flow under pressure, which limit their use at elevated temperamres have been reduced by cross-linking with EB radiation. The cross-linked polyurethane shows good mechanical properties and also displays good resistance to aggressive chemicals, e.g., brake fluid [432 35]. 

Used industrially to manufacture polyurethane foams, elastomers, coatings used as a cross-linking agent. 

Toluene diisocyanate is commonly produced as a mixture of the 2,4- and 2,6-iso-niers, that is used as a monomer in the preparation of polyurethane foams, elastomers and coatings, as a cross-linking agent for nylon-6, and as a hardener in polyurethane adhesives and finishes. Polyurethane elastomers made from toluene diisocyanates are used in coated fabrics and clay-pipe seals. Polyurethane coatings made from toluene diisocyanates are used in floor finishes, wood finishes and sealers, and in coatings for aircraft, tank trucks, truck trailers and truck fleets (United States National Library of Medicine, 1997). 

When reacting either ethylene carbonate or propylene carbonate with an aliphatic diamine, a polyurethane can be produced (Figure 2.14). Polyethylene ether carbonate) diols (Harris et al., 1990), when fabricated into polyurethanes using MDI and BDO, produce elastomers that have polyester polyol features. This was shown using 13C NMR. The structure gives rise to potential for a very high virtual cross-linking density. These carbonate-derived polyesters have superior hydrolysis resistance compared to the traditional materials. 

Thermoplastic elastomers (TPE s) are characterized by the exceptional property that, without vulcanization, they behave as cross-linked rubbers. They are block-copolymers, in which blocks of the same nature assemble in hard domains, acting as cross-links between the rubbery parts of the chain. These hard domains lose their function when they reach their softening temperature, so that the material can then be processed as a thermoplast. One of the oldest member of the family of TPE s is SBS (styrene-butadiene-styrene block copolymer), but several other TPE s have been developed, i.a. on the basis of polyesters, polyurethanes and polyolefins. In their properties these polymers cover a broad range between conventional rubbers and soft thermoplastics. 

---