Polypropylene bonding, solvent

Mor-Ad [Morton], TM for a series of adhesives consisting of solvent-free-one component urethane, cross-linked water-borne epoxy, and polypropylene bonding adhesives. 

Lamination Inks. This class of ink is a specialized group. In addition to conforming to the constraints described for flexo and gravure inks, these inks must not interfere with the bond formed when two or more films, eg, polypropylene and polyethylene, are joined with the use of an adhesive in order to obtain a stmcture that provides resistance properties not found in a single film. Laminations are commonly used for food applications such as candy and food wrappers. Resins used to make this type of ink caimot, therefore, exhibit any tendency to retain solvent vapor after the print has dried. Residual solvent would contaminate the packaged product making the product unsalable. 

Some of the most difficult heterophase systems to characterize are those based on hydrocarbon polymers such as mbber-toughened polypropylene or other blends of mbbers and polyolefins. Eecause of its selectivity, RuO staining has been found to be usehil in these cases (221,222,230). Also, OsO staining of the amorphous blend components has been reported after sorption of double-bond-containing molecules such as 1,7-octadiene (231) or styrene (232). In these cases, the solvent is preferentially sorbed into the amorphous phase, and the reaction with OsO renders contrast between the phases. 

Low surface energy substrates, such as polyethylene or polypropylene, are generally difficult to bond with adhesives. However, cyanoacrylate-based adhesives can be effectively utilized to bond polyolefins with the use of the proper primer/activa-tor on the surface. Primer materials include tertiary aliphatic and aromatic amines, trialkyl ammonium carboxylate salts, tetraalkyl ammonium salts, phosphines, and organometallic compounds, which are initiators for alkyl cyanoacrylate polymerization [33-36]. The primer is applied as a dilute solution to the polyolefin surface, solvent is allowed to evaporate, and the specimens are assembled with a small amount of the adhesive. With the use of primers, adhesive strength can be so strong that substrate failure occurs during the course of the shear tests, as shown in Fig. 11. 

Lithium and alkyllithiums in aliphatic hydrocarbon solvents are also used to initiate anionic polymerization of 1,3-butadiene and isoprene.120,183-187 As 1,3-butadiene has conjugated double bonds, homopolymerization of this compound can lead to several polymer structures. 1,4 Addition can produce cis-1,4- or tram-1,4-polybutadiene (19, 20). 1,2 Addition results in a polymer backbone with vinyl groups attached to chiral carbon atoms (21). All three spatial arrangements (isotactic, syndiotactic, atactic) discussed for polypropylene (see Section 13.2.4) are possible when polymerization to 1,2-polybutadiene takes place. Besides producing these structures, isoprene can react via 3,4 addition (22) to yield polymers with the three possible tacticites ... 

A solid plastic may be ground to a solid powder and then used to apply a plastic coating to a metal product, either for decorative reasons (color) or for functional performance such as insulation or corrosion resistance. Plastics most often used in this way include nylon, vinyl, acrylic, polyethylene, polypropylene, and epoxy. Coating without solvents is beneficial both economically and environmentally, and 100 percent utilization of material eliminates waste. After the powder is bonded to the metal surface, it is often reheated to flow into a more uniform coating and, in the case of thermosetting resins, to complete the cure reaction. 

Polyethylene and Polypropylene Acceptable bonds have been obtained between treated polyolefin surfaces with polar adhesives, such as epoxies, or solvent cements containing synthetic rubber or phenolic resin. The solvent adhesives are applied to both surfaces and the solvents allowed to evaporate before the parts are joined. Recommended epoxies are the anhydride-cured and amine-cured types. Also suitable is a two-component, polyamide-modified epoxy compound. Other adhesives that provide adequate bond strength to treated polyolefins include styrene-unsatmated polyester and solvent-type nitrile-phenolic (15). 

The use of these monomers for radiation cross-linking of polyethylene has been suggested [66]. With benzophenone as a photosensitizer, atactic as well as isotactic polypropylene is crosslinked with allyl acrylate by UV radiation. In this process both types of double bonds react [67]. Elastomers such as ethylene-vinyl acetate copolymer have been cross-linked with this monomer on a roller mill at 150°C using dicumyl peroxide as the initiator. Such cross-linked elastomers exhibit little or no swelling with aromatic solvents or chloroform after 24 hr at 30°C, conditions under which the uncured elastomers ordinarily dissolve [68]. Despite these interesting applications for such monomers, the bulk of the commercially produced allyl methacrylate finds application as a synthetic intermediate rather than as a monomer. 

Polypropylene is one of the lightest plastics, with a density of 0.905. The nonpolar nature of the polymer gives PP low water absorption. Polypropylene has good chemical resistance, but liquids such as chlorinated solvents, gasoline, and xylene can affect the material. Polypropylene has a low dielectric constant and is a good insulator. Difficulty in bonding to polypropylene can be overcome by the use of surface treatments to improve the adhesion characteristics. 

---