Polymers treeing

Polymer tree radicals foimed by heat, radiation,... 

An (/,m)-cluster has Z - 1 cross-links connecting / constituent polymer chains, and fl — 2/ -t-2 unreacted functional groups, m of which are hydrated by solvent molecules. The combinatorial factor is given by f toi for the connection of the /-functional polymers into a tree, where a>i = fl—Z) // (/Z—2/ -b 2) is the Stockmayer factor (3.19). For each type of the polymer tree, m attaching sites must be chosen from f I —21+2 open sites for hydration. This selection gives a binomial factor fi-ii+iCm- The total combinatorial free energy change then takes the form... 

Consider a branched polymer stmeture that does not involve any cycles (an example of such polymer tree strurture is shown in Figure 1(g)). Each strand (arm) of the polymer is an ideal Gaussian chain. For each pair i, J of units (heads) in this structure there is one and only one connerting linear strand hence (] ) -n] ) = b riip where n,j is the number of bonds in the connecting strand. Equation [20] then simplifies to... 

Sunder A, Heinemann J, Frey H (2000) Controlling the growth of polymer trees concepts and perspectives for hyperbranched polymers. Chem Eur J 6(14) 2499-2506... 

Some 500 years ago during Columbuss second voyage to what are now the Americas he and his crew saw children playing with balls made from the latex of trees that grew there Later Joseph Priest ley called this material rubber to describe its ability to erase pencil marks by rubbing and in 1823 Charles Macintosh demonstrated how rubber could be used to make waterproof coats and shoes Shortly there after Michael Faraday determined an empirical for mula of CsHs for rubber It was eventually determined that rubber is a polymer of 2 methyl 1 3 butadiene... 

The ceUulose polymer and its conversion routes have already proved to be capable of adaptation to meet a wide range of market demands. The advances being made in getting ceUulose into solution with minimal environmental impact augur weU for the development of streamlined routes from tree to fiber or fabric. 

The carbon black in semiconductive shields is composed of complex aggregates (clusters) that are grape-like stmctures of very small primary particles in the 10 to 70 nanometer size range (see Carbon, carbon black). The optimum concentration of carbon black is a compromise between conductivity and processibiUty and can vary from about 30 to 60 parts per hundred of polymer (phr) depending on the black. If the black concentration is higher than 60 phr for most blacks, the compound is no longer easily extmded into a thin continuous layer on the cable and its physical properties are sacrificed. Ionic contaminants in carbon black may produce tree channels in the insulation close to the conductor shield. 

Natural resins are generally described as solid or semisolid amorphous, fusible, organic substances that are formed in plant secretions. They are usually transparent or translucent yeUow-to-brown colored, and are soluble in organic solvents but not in water. The principal uses for natural resins are in varnishes, printing inks, adhesives, paper size, and polymer compositions. The term natural resins includes tree and plant exudates, fossil resins, mined resins, and shellac. They often have been altered from their original state during isolation and processing. For some appHcations, the resins have been chemically modified to increase their industrial utiUty. 

People have used polymers for far longer than metals. From the earliest times, wood, leather, wool and cotton have been used for shelter and clothing. Many natural polymers are cheap and plentiful (not all, though think of silk) and remarkably strong. But they evolved for specific natural purposes - to support a tree, to protect an animal -and are not always in the form best suited to meet the needs of engineering. 

The SCB distribution (SCBD) has been extensively studied by fractionation based on compositional difference as well as molecular size. The analysis by cross fractionation, which involves stepwise separation of the molecules on the basis of composition and molecular size, has provided information of inter- and intramolecular SCBD in much detail. The temperature-rising elution fractionation (TREE) method, which separates polymer molecules according to their composition, has been used for HP LDPE it has been found that SCB composition is more or less uniform [24,25]. It can be observed from the appearance of only one melt endotherm peak in the analysis by differential scanning calorimetry (DSC) (Fig. 1) [26]. Wild et al. [27] reported that HP LDPE prepared by tubular reactor exhibits broader SCBD than that prepared by an autoclave reactor. The SCBD can also be varied by changing the polymerization conditions. From the cross fractionation of commercial HP LDPE samples, it has been found that low-MW species generally have more SCBs [13,24]. 

Shellac [124,125] is a natural resin used in very old times for varnishes and moulding compounds. The resin secreted by the lac insect, Kerriar paca, is collected by scraping the shellac-encrusted trees found in southern parts of Asia. It consists of a complex mixture of cross-linked polyesters derived from hydroxy acids, principally aleuritic acid (9,10,16-trihydroxyhexadecanoic acid). From a structural point of view, it appears that this material can be used as a crosslinking agent and/or as a monomer for developing dentrite-like polymers. The question is whether it is possible to produce this material from shellac by controlled hydrolysis. 

Rubber—an unusual name for an unusual substance—is a naturally occurring aikene polymer produced by more than 400 different plants. The major source is the so-called rubber tree, Hevea brasiliensis, from which the crude material is harvested as it drips from a slice made through the bark. The name rubber was coined by Joseph Priestley, the discoverer of oxygen and early researcher of rubber chemistry, for the simple reason that one of rubber s early uses was to tub out pencil marks on paper. 

The remainder of this chapter will deal with natural polymers. These are large molecules, produced by plants and animals, that carry out the many life-sustaining processes in a living cell. The cell membranes of plants and the woody structure of trees are composed in large part of cellulose, a polymeric carbohydrate. We will look at the structures of a variety of different carbohydrates in Section 23.3. Another class of natural polymers are the proteins. Section 23.4 deals with these polymeric materials that make up our tissues, bone, blood, and even hair. ... 

Rubber is a polymer of isoprene (15). Natural rubber is obtained from the bark of the rubber tree as a milky white liquid, which is called latex (Fig. 19.8) and consists of a suspension of rubber particles in water. The rubber itself is a soft white solid that becomes even softer when warm. It is used for pencil erasers and was once used as crepe rubber for the soles of shoes. 

The stems of the tree were foimd to contain polysaccharides consisting of arabinose, galactose and galacturonic acid and only minor amoimts of rham-nose. Structural studies indicate that the polymeric material consists of 1,4-linked galacturonic acid residues, terminal, 1,4-, 1,6- and 1,3,6 galactose units and terminal and 1,5-linked arabinofuranose residues. Further studies must be performed on this in order to determine what type of pectin it can be classified as. The Hnkage data indicate that both AG-I and AG-II are present. This polymer was shown to activate polyclonal B-cells [78]. 

Rubber is obtained from the juice of various tropical trees, mainly the tree Hevea brasiliensis. The juice is a latex consisting of a dispersion of polymer phase at a concentration of about 35% by mass, together with traces of proteins, sterols, fats, and salts. The rubber is obtained either by coagulation of the latex with acid, either ethanoic or methanoic, or by evaporation in air or over a flame. The material that results from this process is a crumbly, cheeselike substance, sometimes called raw rubber or caoutchouc. In order to... 

The synthesis and study of dendrimers is a relatively new branch of macro-molecular chemistry. It began in 1985 with the publication of two landmark papers (D.A. Tomalia, H. Baker, J. Dewald, J.M. Hall, G. Kallos, R. Martin and J. Ryder, Polym. J., 1985,17,117-132 and G.R. Newkome, Z. Yao, G.R. Baker and V.K. Gupta, J. Org. Chem., 1985, 50, 2003-2004), and has grown to become a very vibrant research field. The word dendrimer comes from the Greek word dendra, meaning tree, and was applied to these compounds by Tomalia et al. in their very first paper. Newkome s team, by contrast, called their molecules arborols from the Latin word arbor, which also means a tree. The term cascade molecule has also been used, but the word dendrimer is the one that is used most widely throughout the literature, and is also used in the present chapter. 

The first alkene polymer to be used in society was polyisoprene, a natural product extracted from the sap of rubber trees. See our Box for a description of the history of rubber. The monomer from which this polymer is constructed... 

---