Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Polymers network type

A similar example is the formation of nonstoichiometric interpolymeric complexes between mutually complementary polyelectrolytes — polycation and polyanion [69,70], They behave like true polymer networks and are capable of swelling the interpolymeric complexes between PAAc and polyethylene piperazine swells, for instance, 16-18 times [70], Also advantageous in this case is the possibility to carry out this type of crosslinking in open systems, such as soil. [Pg.107]

Reactions of this type are quite popular and widely used to introduce hydrophilic and ionogenic groups into linear polymers as well as directly into polymer networks. These reactions include hydrolysis (PAAm, PAAc and their analogs from PAN, PVA from poly (vinyl acetate), oxyethylation and oxymethylation of starch and cellulose, sulfurization, and other reactions. These processes are of industrial importance, well studied and widely reviewed. [Pg.110]

In conclusion, the lesson learned from the research carried out to date on the subject of polycarbosilanes is that the general rule that linear, noncrosslinked polymers are not suitable preceramic polymers applies here as well. Crosslinked network-type polymers are needed. Such structures can be generated in more than one way, but in the case of the polycarbosilanes they have, to date, been obtained mainly by thermolytic routes thermal treatment (with or without other chemical additives) in the case of the Yajima polycarbosilanes and the thermolysis of tetramethylsilane in the case of the Bayer process-derived polycarbosilane. [Pg.34]

Philippova and Starodubtzev have also extensively studied the complex-ation behavior of polyacids and PEG, especially, the system of crosslinked of poly(methacrylic acid) and linear poly(ethylene glycol) (Philippova and Starodubtzev, 1995 Philippova et al., 1994). They observed that decreasing the molecular weight of PEG from 6000 to 1500 resulted in its slower diffusion into the swollen network of PMAA, and a drastic decrease in both the stability and equilibrium composition of the intermacromolecular complex. Analysis of dried polymer networks of PMAA with absorbed PEG chains by FT-IR spectroscopy revealed the presence of two types of hydrogen bonded structures (1) dimers of methacrylic acid at absorption frequency of 1700 cm-1 and (2) interpolymer complexes of PMAA and PEG at 1733 cm-1. In addition, they also suggested as a result of their studies, that the hydrogen bonded dimer of PMAA forms preferentially to the intermacromolecular complex between the PMAA network and PEG chains. [Pg.94]

Hydrolysis of PEHS in early stages also takes place. Then the products of hydrolysis interact with ATES. The preferable formation of polymeric network type depends on methods of the mixture preparation, treatment of the materials and etc. Besides the reaction with Ca(OH)2 takes place and as the result the polymer is fixed strongly in the treated materials. [Pg.222]

One method of achieving a polymerised polymer-network is by the use of two distinct types of compounds, a monomer and a crosslinker. A simple example of this combination is styrene as a monomer and divinyl... [Pg.202]

Materials known as interpenetrating polymer networks, IPN s, contain two or more polymers, each in network form (6 9), A practical restriction requires that at least one of the polymer networks has been formed (i.e. polymerized or crosslinked) in the immediate presence of the other. Two major types of synthesis have been explored, both yielding distinguishable materials with different morphologies and physical properties. [Pg.408]

Synthetic polymers This type of chiral selectors (polyacrylamides, polymethacrylamide, etc.) was first developed by the group of Blaschke by polymerization of chiral monomers with cross-linking agents to form a three-dimensional polymer network. [Pg.476]

The combination of various chemical types of polymer networks in different compositions, resulting frequently in controlled, different morphologies, has produced IPNs with synergistic behavior. Thus, synergistic properties may be obtained by IPNs such as enhanced tensile and impact strength, improved adhesion and, in some cases, greater sound and shock absorption (4-7). [Pg.298]

The synthesis and proposed cure mechanisms of this resin are described in reference 2. While the cure mechanism of the BCB terminated resin is not yet known, it is speculated that it reacts via one of two different routes. Initially the strained four member ring of the benzocyclobutene undergoes a thermally Induced ring opening. The opened rings then react with one another by a linear type addition to form a network type of structure or by cycloaddition to form linear polymer chains. An Illustration of the proposed polymerization mechanism of benzocyclobutene (BCB) terminated resins is shown below. [Pg.367]

Two systems of polymer nomenclature have been introduced - the source-based and the structure-based. The latter cannot be used for all types of macromolecule, e.g., statistieal copolymer molecules and polymer networks. lUPAC expresses no strong preference for the use of structure-based nomenclature versus source-based nomenclature, but for certain purposes one system of naming may be preferred to the other.. ... [Pg.261]

Models which also describe the molecular weight between crosslinks for neutral polymer networks but use a non-Gaussian chain distribution have also been derived. These models would be useful in cases of highly crosslinked polymer networks. Examples of these types of models include those of Peppas and Lucht [7], Kovac [8], and Galli and Brummage [9]. [Pg.132]

Polymer network structure is important in describing the transport through biomedical membranes [139, 140]. The mechanism of diffusion in membranes may be that of pure diffusion or convective transport depending on the mesh size of the polymer network. With this in mind, polymer membranes are typically divided into three major types described below [141]. [Pg.165]


See other pages where Polymers network type is mentioned: [Pg.329]    [Pg.329]    [Pg.16]    [Pg.68]    [Pg.251]    [Pg.251]    [Pg.151]    [Pg.128]    [Pg.281]    [Pg.19]    [Pg.546]    [Pg.35]    [Pg.66]    [Pg.430]    [Pg.169]    [Pg.530]    [Pg.77]    [Pg.30]    [Pg.108]    [Pg.46]    [Pg.115]    [Pg.32]    [Pg.27]    [Pg.369]    [Pg.108]    [Pg.151]    [Pg.155]    [Pg.208]    [Pg.3]    [Pg.169]    [Pg.269]    [Pg.297]    [Pg.440]    [Pg.87]    [Pg.224]    [Pg.20]    [Pg.95]   
See also in sourсe #XX -- [ Pg.236 ]




SEARCH



Cross-linked, network-type polymers

Interpenetrating polymer networks types

Networks Polymer network

Polymer networked

Polymer networks

Polymers types

© 2024 chempedia.info