Polymers and electrodes

By 1988, a number of devices such as a MOSFET transistor had been developed by the use of poly(acetylene) (Burroughes et al. 1988), but further advances in the following decade led to field-effect transistors and, most notably, to the exploitation of electroluminescence in polymer devices, mentioned in Friend s 1994 survey but much more fully described in a later, particularly clear paper (Friend et al. 1999). The polymeric light-emitting diodes (LEDs) described here consist in essence of a polymer film between two electrodes, one of them transparent, with careful control of the interfaces between polymer and electrodes (which are coated with appropriate films). PPV is the polymer of choice. 

Redox-Active Polymer and Electrode Comprising the Same... 

Solid Polymer E,kctroljte. The electrolyte in soHd polymer electrolyte (SPE) units is Nafion, a soHd polymer developed by Du Pont, which has sulfonic acid groups attached to the polymer backbone. Electrodes are deposited on each side of the polymer sheet. H" ions produced at the anode move across the polymer to the cathode, and produce hydrogen. The OH ions at the anode produce oxygen. These units have relatively low internal resistances and can operate at higher temperatures than conventional alkaline electrolysis units. SPE units are now offered commercially. 

Electrochemical polymeriza tion of heterocycles is useful in the preparation of conducting composite materials. One technique employed involves the electro-polymerization of pyrrole into a swollen polymer previously deposited on the electrode surface (148—153). This method allows variation of the physical properties of the material by control of the amount of conducting polymer incorporated into the matrix film. If the matrix polymer is an ionomer such as Nation (154—158) it contributes the dopant ion for the oxidized conducting polymer and acts as an effective medium for ion transport during electrochemical switching of the material. 

The changes in the optical absorption spectra of conducting polymers can be monitored using optoelectrochemical techniques. The optical spectmm of a thin polymer film, mounted on a transparent electrode, such as indium tin oxide (ITO) coated glass, is recorded. The cell is fitted with a counter and reference electrode so that the potential at the polymer-coated electrode can be controlled electrochemically. The absorption spectmm is recorded as a function of electrode potential, and the evolution of the polymer s band stmcture can be observed as it changes from insulating to conducting (11). 

It is well known today that the SEI on both lithium and carbonaceous electrodes consists of many different materials including LiF, Li2C03, LiC02R, Li20, lithium alkoxides, nonconductive polymers, and more. These materials form simultaneously and precipitate on the electrode as a mosaic of microphases [5, 6], These phases may, under certain conditions, form separate layers, but in general it is more appropriate to treat them as het-eropolymicrophases. We believe that Fig. 13(a) is the most accurate representation of the SEI. 

Kaneko,M. and Wdhrie,D. Polymer-Coated Electrodes New Materials for Science and Industry. Vol. 84, pp. 141 — 228. 

The presence of polymer, solvent, and ionic components in conducting polymers reminds one of the composition of the materials chosen by nature to produce muscles, neurons, and skin in living creatures. We will describe here some devices ready for commercial applications, such as artificial muscles, smart windows, or smart membranes other industrial products such as polymeric batteries or smart mirrors and processes and devices under development, such as biocompatible nervous system interfaces, smart membranes, and electron-ion transducers, all of them based on the electrochemical behavior of electrodes that are three dimensional at the molecular level. During the discussion we will emphasize the analogies between these electrochemical systems and analogous biological systems. Our aim is to introduce an electrochemistry for conducting polymers, and by extension, for any electrodic process where the structure of the electrode is taken into account. 

---