Polymeric supports functionalization

New templated polymer support materials have been developed for use as re versed-phase packing materials. Pore size and particle size have not usually been precisely controlled by conventional suspension polymerization. A templated polymerization is used to obtain controllable pore size and particle-size distribution. In this technique, hydrophilic monomers and divinylbenzene are formulated and filled into pores in templated silica material, at room temperature. After polymerization, the templated silica material is removed by base hydrolysis. The surface of the polymer may be modified in various ways to obtain the desired functionality. The particles are useful in chromatography, adsorption, and ion exchange and as polymeric supports of catalysts (39,40). 

There is a whole spectrum of heterogeneous catalysts, but the most common types consist of an inorganic or polymeric support, which may be inert or have acid or basic functionality, together with a bound metal, often Pd, Pt, Ni or Co. Even if the support is inert its structure is of vital importance to the efficiency of the catal ic reaction. Since the reactants are in a different phase to the catalyst both diffusion and adsorption influence the overall rate, these factors to some extent depending on the nature and structure of the support. 

BAL chemistry is compatible with a wide range of functionalized polymeric supports, including PS, PEG-PS, and Synphase crowns. 

In conclusion, the BAL method is a novel and general strategy for solid-phase synthesis of peptides and peptide derivatives, is compatible with a wide range of functionalized polymeric supports, and is readily generalizable to other nitrogen-containing molecules.9... 

In the literature, fluorescence spectroscopy in OFD has been limited to the use of ultraviolet (UV) or visible dyes as molecular probes.(1) The most common fluorescent dye used in OFD is fluorescein and its derivatives/21 23) Fluorescein possesses a good fluorescence quantum yield and is commercially available with an isothiocyanate functionality for linking to the polymeric support/24-26 Additionally, selective laser excitation can be performed because the absorbance maximum of fluorescein coincides with the 499-nm laser line emitted from an argon laser. Unfortunately, argon lasers are costly and bulky, thus limiting the practicality of their use. Similar difficulties exist with other popular commercial dyes. 

The palladium-catalyzed coupling of boronic acids with aryl and alkenyl halides, the Suzuki reaction, is one of the most efficient C-C cross-coupling processes used in reactions on polymeric supports. These coupling reactions requires only gentle heating to 60-80 °C and the boronic acids used are nontoxic and stable towards air and water. The mild reaction conditions have made this reaction a powerful and widely used tool in the organic synthesis. When the Suzuki reaction is transferred to a solid support, the boronic add can be immobilized or used as a liquid reactant Carboni and Carreaux recently reported the preparation of the macroporous support that can be employed to efficiently immobilize and transform functionalized arylboronic adds (Scheme 3.12) [107, 246, 247]. 

Other functionalized supports that are able to serve in the asymmetric dihydroxylation of alkenes were reported by the groups of Sharpless (catalyst 25) [88], Sal-vadori (catalyst 26) [89-91] and Cmdden (catalyst 27) (Scheme 4.13) [92]. Commonly, the oxidations were carried out using K3Fe(CN)g as secondary oxidant in acetone/water or tert-butyl alcohol/water as solvents. For reasons of comparison, the dihydroxylation of trons-stilbene is depicted in Scheme 4.13. The polymeric catalysts could be reused but had to be regenerated after each experiment by treatment with small amounts of osmium tetroxide. A systematic study on the role of the polymeric support and the influence of the alkoxy or aryloxy group in the C-9 position of the immobilized cinchona alkaloids was conducted by Salvadori and coworkers [89-91]. Co-polymerization of a dihydroquinidine phthalazine derivative with hydroxyethylmethacrylate and ethylene glycol dimethacrylate afforded a functionalized polymer (26) with better swelling properties in polar solvents and hence improved performance in the dihydroxylation process [90]. 

Generally these globular dendritic architectures offer several advantages over other kinds of organic polymers, such as the full exposure of the catalytic centers to the environment. In contrast to linear or cross-Hnked polymeric supports, which can partially hide catalytic centers, the functional groups are located on the surface of the dendritic nanoparticle and diffusional Hmitations are less relevant Furthermore the close proximity of the catalytic centers on the surface of the dendritic polymer can enhance the catalytic activity by multiple complexation or even cooperativity. This behavior is described as positive dendritic effect. However, in some cases a negative dendritic effect was observed, which is caused by an undesired interaction or electron transfer between the neighboring catalytic centers on the surface of the dendrimer [70]. 

In principle, linker groups are polymer-enlarged versions of blocking functions used in regular solution-phase chemistry. Therefore, enzymatic transformations that may be employed for the removal of protecting groups in solution, in principle may also open up alternative opportunities for releasing compounds from polymeric supports. The linkers developed so far can be divided into exo- and endo-linkers (Fig. 10.1) cleavable by exo- respectively endo-enzymes, as proposed by Flitsch et al. [6]. 

TentaGelS-NH2 was chosen as the polymeric support, i.e. a polystyrene resin equipped with terminally NH2-functionalized oligoethylene glycol units. It has a polar surface and swells in aqueous solutions allowing the biocatalyst access to the polymer matrix [53]. 

POE 6000 was used as polymeric support, a soluble polyethylene glycol derivative functionalized at both termini with an amino group and with an average molecular mass of 6000 Da [62-63]. After completion of the homogeneous reactions it can be precipitated, filtered off, and washed with diethyl ether, thereby facilitating the separation of surplus reagents and the side products. Furthermore it allows for NMR spectroscopic monitoring of the reactions [64]. 

---