Polymer solution properties, model

Prediction of Polymer Solution Properties from a Model of Chain Conformations and Interactions... 

Equation-of-state approaches are preferred concepts for a quantitative representation of polymer solution properties. They are able to correlate experimental VLE data over wide ranges of pressure and temperature and allow for physically meaningful extrapolation of experimental data into unmeasured regions of interest for application. Based on the experience of the author about the application of the COR equation-of-state model to many polymer-solvent systems, it is possible, for example, to measure some vapor pressures at temperatures between 50 and 100 C and concentrations between 50 and 80 wt% polymer by isopiestic sorption together with some infinite dilution data (limiting activity coefficients, Henry s constants) at temperatures between 100 and 200 C by IGC and then to calculate the complete vapor-liquid equilibrium region between room temperature and about 350 C, pressures between 0.1 mbar and 10 bar, and solvent concentration between the common polymer solution of about 75-95 wt% solvent and the ppm-region where the final solvent and/or monomer devolatilization process takes place. Equivalent results can be obtained with any other comparable equation of state model like PHC, SAFT, PHSC, etc. 

Empirical kinetics are useful if they allow us to develop chemical models of interfacial reactions from which we can design experimental conditions of synthesis to obtain thick films of conducting polymers having properties tailored for specific applications. Even when those properties are electrochemical, the coated electrode has to be extracted from the solution of synthesis, rinsed, and then immersed in a new solution in which the electrochemical properties are studied. So only the polymer attached to the electrode after it is rinsed is useful for applications. Only this polymer has to be considered as the final product of the electrochemical reaction of synthesis from the point of view of polymeric applications. 

The dynamical properties of polymer molecules in solution have been investigated using MPC dynamics [75-77]. Polymer transport properties are strongly influenced by hydrodynamic interactions. These effects manifest themselves in both the center-of-mass diffusion coefficients and the dynamic structure factors of polymer molecules in solution. For example, if hydrodynamic interactions are neglected, the diffusion coefficient scales with the number of monomers as D Dq /Nb, where Do is the diffusion coefficient of a polymer bead and N), is the number of beads in the polymer. If hydrodynamic interactions are included, the diffusion coefficient adopts a Stokes-Einstein formD kltT/cnr NlJ2, where c is a factor that depends on the polymer chain model. This scaling has been confirmed in MPC simulations of the polymer dynamics [75]. 

Based on the solution property of poly (DMAEMA-co-AAm) in response to temperature, the temperature dependence of equilibrium swelling of poly (DMAEMA-c6>-AAm) gel as a function of chemical composition was observed as shown in Figure 6. The transition temperature of copolymer gel between the shrunken and swollen state was shifted to the lower temperature with increases in AAm content in the gel network. This is attributed to the hydrogen bond in the copolymer gel network and its hydrophobic contribution to the LCST Copolymer II gel was selected as a model polymer network for permeation study because it showed the sharp swelling transition around 34°C. 

Properties of peroxide cross-linked polyethylene foams manufactured by a nitrogen solution process, were examined for thermal conductivity, cellular structure and matrix polymer morphology. Theoretical models were used to determine the relative contributions of each heat transfer mechanism to the total thermal conductivity. Thermal radiation was found to contribute some 22-34% of the total and this was related to the foam s mean cell structure and the presence of any carbon black filler. There was no clear trend of thermal conductivity with density, but mainly by cell size. 27 refs. 

This article reviews the following solution properties of liquid-crystalline stiff-chain polymers (1) osmotic pressure and osmotic compressibility, (2) phase behavior involving liquid crystal phasefs), (3) orientational order parameter, (4) translational and rotational diffusion coefficients, (5) zero-shear viscosity, and (6) rheological behavior in the liquid crystal state. Among the related theories, the scaled particle theory is chosen to compare with experimental results for properties (1H3), the fuzzy cylinder model theory for properties (4) and (5), and Doi s theory for property (6). In most cases the agreement between experiment and theory is satisfactory, enabling one to predict solution properties from basic molecular parameters. Procedures for data analysis are described in detail. 

The distinct properties of liquid-crystalline polymer solutions arise mainly from extended conformations of the polymers. Thus it is reasonable to start theoretical considerations of liquid-crystalline polymers from those of straight rods. Long ago, Onsager [2] and Flory [3] worked out statistical thermodynamic theories for rodlike polymer solutions, which aimed at explaining the isotropic-liquid crystal phase behavior of liquid-crystalline polymer solutions. Dynamical properties of these systems have often been discussed by using the tube model theory for rodlike polymer solutions due originally to Doi and Edwards [4], This theory, the counterpart of Doi and Edward s tube model theory for flexible polymers, can intuitively explain the dynamic difference between rodlike and flexible polymers in concentrated systems [4]. 

In the present article, we focus on the scaled particle theory as the theoretical basis for interpreting the static solution properties of liquid-crystalline polymers. It is a statistical mechanical theory originally proposed to formulate the equation of state of hard sphere fluids [11], and has been applied to obtain approximate analytical expressions for the thermodynamic quantities of solutions of hard (sphero)cylinders [12-16] or wormlike hard spherocylinders [17, 18]. Its superiority to the Onsager theory lies in that it takes higher virial terms into account, and it is distinctive from the Flory theory in that it uses no artificial lattice model. We survey this theory for wormlike hard spherocylinders in Sect. 2, and compare its predictions with typical data of various static solution properties of liquid-crystalline polymers in Sects. 3-5. As is well known, the wormlike chain (or wormlike cylinder) is a simple yet adequate model for describing dilute solution properties of stiff or semiflexible polymers. 

In this article, we have surveyed typical properties of isotropic and liquid crystal solutions of liquid-crystalline stiff-chain polymers. It had already been shown that dilute solution properties of these polymers can be successfully described by the wormlike chain (or wormlike cylinder) model. We have here concerned ourselves with the properties of their concentrated solutions, with the main interest in the applicability of two molecular theories to them. They are the scaled particle theory for static properties and the fuzzy cylinder model theory for dynamical properties, both formulated on the wormlike cylinder model. In most cases, the calculated results were shown to describe representative experimental data successfully in terms of the parameters equal or close to those derived from dilute solution data. 

Dilute Solution Properties of Model Branched Polymers... 

---