Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Polymer addition chain

Flame Retardants. Bromine compounds make up an important segment of the market for flame retardants used in polymers. Additive flame retardants are added to polymers during processing reactive flame retardants react chemically to become part of the polymer chain itself. In addition to the compounds Hsted in Table 3, a number of proprietary mixtures and phosphoms—bromine-containing flame retardants are also sold (see Elame RETARDANTS, HALOGENATED, FLAAffi RETARDANTS). [Pg.298]

Paint Driers and Polymer Additives. Paints based on alkyd resins (qv) dry by the oxidation and cross-linking of unsaturated side chains. Metal catalysts are included in paint formulations to promote this drying. Cerium carboxylates, eg, the naphthenate, are used as through driers, ie, to promote drying in the body of the paint film rather than at the film s surface (44). [Pg.371]

The molecular chains of plastics are formed by condensation or addition polymerization,. V condensation polymer forms by stepwise reacting molecules with each other and eliminating small molecules such as water. Addition polymer forms chains by the linking without elimin.ating small molecules,... [Pg.277]

Polymer and chain formation is another property of chalcogen-nitrogen compounds that distinguishes them from their oxygen analogues. In addition to the unique, superconducting poly(sulfur nitride) (SN) (1.24) (Section 14.2), a variety of poly(thiazyl) chains such as RS5N4R (1.25) (Section 14.3) have been characterized. Interest in these chains stems from their possible use as models for the behaviour of (SN) and as components in molecular materials, e.g., as molecular wires. [Pg.8]

Ring opening polymerization may also occur by an addition chain reaction. For example, a ring opening reaction polymerizes trioxane to a polyacetal in the presence of an acid catalyst. Formaldehyde also produces the same polymer ... [Pg.314]

So far, we have not introduced a specific model of the polymer network chains. This problem can be rigorously solved for cross-linked polymer networks consisting of phantom chains [13], or even in the more general case of filled networks where the chains interact, additionally, with spherical hard filler particles [15]. [Pg.610]

For polymer/additive analysis complete dissolution is not a prerequisite. Rather, the solvent should at least swell the polymer by diffusion, which allows the physically blended additives to dissolve. True dissolution occurs predominantly when polymer chain lengths are small, on the order of 5000-10 000 Da. Solvent choice for dissolution or extraction should take into account restrictions imposed by further analysis steps (compatibility with chromatographic and/or spectroscopic requirements). When microwave extraction of additives from a polymer is followed by HPLC analysis, the solvent must be compatible with the HPLC mobile phase so that solvent exchange is not required before analysis. [Pg.57]

The application of partial relaxation FTNMR in the determination of unreacted monomers, solvent, water, and additives in polymers, polymer degradation, and functional group and chain structure characterisation has been reviewed [255]. Hummel [95] underestimates the contribution of NMR to polymer/additive analysis. [Pg.336]

Since the depolymerization process is the opposite of the polymerization process, the kinetic treatment of the degradation process is, in general, the opposite of that for polymerization. Additional considerations result from the way in which radicals interact with a polymer chain. In addition to the previously described initiation, propagation, branching and termination steps, and their associated rate constants, the kinetic treatment requires that chain transfer processes be included. To do this, a term is added to the mathematical rate function. This term describes the probability of a transfer event as a function of how likely initiation is. Also, since a polymer s chain length will affect the kinetics of its degradation, a kinetic chain length is also included in the model. [Pg.193]

The presence of four kinds of nuclear magnetic resonance (NMR) observable nuclei ( H, uB, 13C, and 29Si) allows poly(m-carborane-siloxane) to be readily investigated using NMR spectroscopy. In addition, H spin-echo NMR relaxation techniques can provide an insight into polymer segmental chain dynamics and therefore useful information on material viscoelastic characteristics. [Pg.105]

In fluorescence spectroscopy, the orientation distribution of the guest probe is not necessarily identical to the actual orientation of the polymer chains, even if it is added at very small concentrations (i.e., a probe with high fluorescence efficiency). As a matter of fact, it is generally assumed that long linear probes are parallel to the polymer main chain, but this is not necessarily the case. Nevertheless, if the relation between the distribution of the probe axes and those of the polymer axes is known, the ODF of the structural units can be calculated from that of the probe thanks to the Legendre s addition theorem. Finally, the added probe seems to be mainly located in the amorphous domains of the polymer [69] so that fluorescence spectroscopy provides information relative to the noncrystalline regions of the polymeric samples. [Pg.324]

Polypropylene is an example of chain-growth polymers (addition polymers) ... [Pg.524]

Oils of the three types are offered in a range of viscosities and this will influence their processing character to some extent, although there is little evidence that it will have much influence on the ultimate compound physical properties, at least in natural rubber compounds. The small additions of oil to a compound help with filler dispersion by lubricating the polymer molecular chains and thus increasing their mobility. There will also be some wetting out of the filler particles which enables them to achieve earlier compatibility with the rubber and improve their distribution and dispersion speed. [Pg.153]

The solution properties of dendrigraft polybutadienes are, as in the previous cases discussed, consistent with a hard sphere morphology. The intrinsic viscosity of arborescent-poly(butadienes) levels off for the G1 and G2 polymers. Additionally, the ratio of the radius of gyration in solution (Rg) to the hydrodynamic radius (Rb) of the molecules decreases from RJRb = 1.4 to 0.8 from G1 to G2. For linear polymer chains with a coiled conformation in solution, a ratio RJRb = 1.48-1.50 is expected. For rigid spheres, in comparison, a limiting value RJRb = 0.775 is predicted. [Pg.220]

There are two main chemical mechanisms by which a synthetic polymer may be produced namely by either a condensation (step growth) polymerisation or addition (chain) polymerisation. [Pg.157]

Nearly all synthetic polymers are synthesized by the polymerization or copolymerization of different "monomers." The chain growth process may involve the addition chain reactions of unsaturated small molecules, condensation reactions, or ringopening chain-coupling processes. In conventional polymer chemistry, the synthesis of a new polymer requires the use of a new monomer. This approach is often unsatisfactory for Inorganic systems, where relatively few monomers or cyclic oligomers can be Induced to polymerize, at least under conditions that have been studied to date. The main exception to this rule is the condensation-type growth that occurs with inorganic dl-hydroxy acids. [Pg.50]

There is a large, but not total, overlap between the terms condensation polymers and stepwise kinetics and the terms addition (or vinyl) polymers and chain kinetics. In this section we will look at each of these four terms and illustrate the similarities and differences between them. [Pg.83]

For many polymers, as one moves from a good solvent to poorer solvent, the extent of close coiling increases resulting in a decreased viscosity because the more tightly coiled polymer chains now reside in fewer flow planes (Figure 7.6). A similar phenomena can occur as the temperature is decreased (above Tg) since the available energy for chain extension becomes less. For some polymers additional specific mechanisms are in action. [Pg.230]


See other pages where Polymer addition chain is mentioned: [Pg.197]    [Pg.59]    [Pg.345]    [Pg.203]    [Pg.26]    [Pg.38]    [Pg.55]    [Pg.386]    [Pg.13]    [Pg.334]    [Pg.466]    [Pg.128]    [Pg.53]    [Pg.116]    [Pg.99]    [Pg.10]    [Pg.171]    [Pg.392]    [Pg.255]    [Pg.18]    [Pg.202]    [Pg.55]    [Pg.579]    [Pg.23]    [Pg.247]    [Pg.141]    [Pg.215]    [Pg.69]    [Pg.285]    [Pg.140]    [Pg.234]    [Pg.203]   
See also in sourсe #XX -- [ Pg.157 ]




SEARCH



Addition or chain-growth polymers

Addition polymers polymer

Additives to Modify Polymer Chain Structures

Chain Polymerization, Addition Polymers

Chain addition

Chain-growth polymers. See Addition

Polymer additives

Polymer additives, Incorporation chains

Polymers chain reaction/addition

Polymers, addition

Preparation of Addition or Chain-Growth Polymers

Radical Additions to Alkenes Chain-Growth Polymers

© 2024 chempedia.info