Polyethylene terephthalate mechanical properties

In this review recent theoretical developments which enable quantitative measures of molecular orientation in polymers to be obtained from infra-red and Raman spectroscopy and nuclear magnetic resonance have been discussed in some detail. Although this is clearly a subject of some complexity, it has been possible to show that the systematic application of these techniques to polyethylene terephthalate and polytetramethylene terephthalate can provide unique information of considerable value. This information can be used on the one hand to gain an understanding of the mechanisms of deformation, and on the other to provide a structural understanding of physical properties, especially mechanical properties. 

The effect of incorporating p-hydroxybenzoic acid (I) into the structures of various unsaturated polyesters synthesised from polyethylene terephthalate (PET) waste depolymerised by glycolysis at three different diethylene glycol (DEG) ratios with Mn acetate as transesterification catalyst, was studied. Copolyesters of PET modified using various I mole ratios showed excellent mechanical and chemical properties because of their liquid crystalline behaviour. The oligoesters obtained from the twelve modified unsaturated polyesters (MUP) were reacted with I and maleic anhydride, with variation of the I ratio with a view to determining the effect on mechanical... 

The performance properties of PEN present opportunities for replacement of rayon or polyamide in carcass construction. The use of PEN cord in these applications is currently being evaluated in both Asia and Europe. PEN has demonstrated acceptable flexural fatigue equivalent to polyethylene terephthalate (PET) and rayon. It has equivalent toughness to rayon, which is important for sidewall impact resistance. PEN s superior mechanical properties also afford opportunities to use less fiber in carcass construction enabling production of lighter-weight, more fuel-efficient tires. 

Most of the polymer s characteristics stem from its molecular structure, which like POE, promotes solubility in a variety of solvents in addition to water. It exhibits Newtonian rheology and is mechanically stable relative to other thermoplastics. It also forms miscible blends with a variety of other polymers. The water solubility and hot meltable characteristics promote adhesion in a number of applications. PEOX has been observed to promote adhesion comparable with PVP and PVA on aluminum foil, cellophane, nylon, poly(methyl methacrylate), and polyethylene terephthalate), and in composite systems improved tensile strength and Izod impact properties have been noted. 

Another motivation for measurement of the microhardness of materials is the correlation of microhardness with other mechanical properties. For example, the microhardness value for a pyramid indenter producing plastic flow is approximately three times the yield stress, i.e. // 3T (Tabor, 1951). This is the basic relation between indentation microhardness and bulk properties. It is, however, only applicable to an ideally plastic solid showing no elastic strains. The correlation between H and Y is given in Fig. 1.1 for linear polyethylene (PE) and poly(ethylene terephthalate) (PET) samples with different morphologies. The lower hardness values of 30-45 MPa obtained for melt-crystallized PE materials fall below the /// T cu 3 value, which may be related to a lower stiff-compliant ratio for these lamellar structures (BaM Calleja, 1985b). PE annealed at ca 130 °C... 

Sanchez-Solis, A. Estrada, M.R. Cruz, J. Manero, O. On the properties and processing of polyethylene terephthalate/styrene-butadiene rubber blend. Polym. Eng. Sci. 2000,40 (5), 1216-1225. Luzinov, I. Xi, K. Pagnoulle, C. Huynh-Ba, G. Jerome, R. Composition effect on the core-shell morphology and mechanical properties of ternary polystyrene/styrene butadiene rubber polyethylene blends. Polymer 1999, 40 (10), 2511-2520. 

Polyethylene terephthalate is a low-cost polymer that exhibits excellent optical and mechanical properties. PET is commonly used in the field of packaging, specifically plastic bottles. PET is also used as flexible substrate in organic solar cells. Exposing this polymer to environmental atmosphere changes its external appearance, modifies its surface, and degrades its properties. 

Bicomponent stretch fiber such as T400 also can be used in the classification of stretch and recovery properties, which positions it between elastane and standard mechanically textured yams. Self-crimp fibers behave like natural wool with a textured appearance. The crimps are from a composite of two parallel attached fibers with differing shrinkage or expansion properties. Usually, the crimp is generated by either false-twist or air-texturing on the fiber via mechanical deformation of the fiber as a 2D zig-zag crimp. A combination of various polyester materials can be used, for example, PET (polyethylene terephthalate), PTT, and PBT. 

K.A. Tawab, S.M. Ibrahim, M.M. Magida, The effect of gamma irradiation on mechanical, and thermal properties of recycling polyethylene terephthalate and low density polyethylene (R-PET/LDPE) blend compatibilized by ethylene vinyl acetate (EVA). J. Radioanal. Nucl. Chem. 295, 1313-1319 (2013)... 

Li et al. reported that immiscible high-density polyethylene (HDPE)/ poly(ethylene terephthalate) (PET) blends, prepared by means of melt extrusion with ethylene-butyl acrylate-glycidyl methacrylate (EBAGMA) terpoly-mer as a reactive compatibilizer, can exhibit shape memory effects [32]. They observed that the compatibilized blends showed improved shape memory effects along with better mechanical properties as compared to the simple binary blends. In the blend, HDPE acts as a reversible phase, and the response temperature in the shape recovery process is determined by of HDPE. The shape-recovery ratio of the 90/10/5 HDPE/PET/EBAGMA blend reached nearly 100%. Similar behavior was observed for immiscible HDPE/ nylon 6 blends [33]. The addition of maleated polyethylene-octene copolymer (POE-g-MAH) increases compatibility and phase-interfacial adhesion between HDPE and nylon 6, and shape memory property was improved. The shape recovery rate of HDPE/nylon 6/POE-g-MAH (80/20/10) blend is 96.5% when the stretch ratio is 75%. 

---