Polyether ether ketones thermosetting resin

The primary resin of interest is epoxy. Carbon-fiber-epoxy composites represent about 90% of CFRP production. The attractions of epoxy resins are that they polymerize without the generation of condensation products that can cause porosity, they exhibit little volumetric shrinkage during cure which reduces internal stresses, and they are resistant to most chemical environments. Other matrix resins of interest for carbon fibers include the thermosetting phenolics, polyimides, and polybismaleimides, as well as high-temperature thermoplastics such as polyether ether ketone (PEEK), polyethersulfone (PES), and polyphenylene sulfide. 

Matrix materials for commercial composites are mainly liquid thermosetting resins such as polyesters, vinyl esters, epoxy resins, and bismaleimide resins. Thermoplastic composites are made from polyamides, polyether ether ketone (PEEK), polyphenylene sulfide (PPS), polysulfone, polyetherim-ide (PEI), and polyamide-imide (PAI). 

Besides graphite, carbon and glass fibers, organic fibers, e.g., Kevlar, have also been used to reinforce thermosetting resins, e.g., epoxy resin (38). One of the newest developments is fiber-reinforced thermoplastics, e.g., carbon fiber-reinforced polyether ether ketone (PEEK) ( ). These materials are rather tough as demonstrated in the interlaminar toughness values (Table... 

Thermosetting resins are the polymers (polyester, vinylester, epoxies) that are generally used to manufacture parts of the machines to produce sustainable energy generators. In addition, thermoplastic resins such as polyether ether ketone (PEEK), polyether sulphone (PES) and various liquid crystal polymers (LCP) are also used. The latter high-performance polymers also meet stringent out-gassing (relevant to space environments) and flammability requirements. 

The resin matrix is usually a formulated thermoset system (i.e. a reactive matrix, which on the application of heat and pressure, chemically reacts to form an infusible reinforced laminate). The thermosetting matrices are most often based on epoxy chemistries although there are plenty of examples of phenolic, bismaleimide and polyimide matrices (for example, the HexPly range from Hexcel Composites) and a few where the resin is based on cyanate esters. Thermoplastic matrices are also encountered (i.e. matrices that can change from a solidus to a liquidus form by tbe application of heat and pressure and then revert to the solid state on cooUng) which are usually, but not exclusively, based on polysulphone, polyetbersulphone or polyether ether ketone chemistries. 

In the last twenty years, many polymers have been used to make polymer nanocomposites. Thermoplastic polymers include nylon, polyaniline (PANI), " poly(s-caprolactone), polycarbonate (PC), polyether ether ketone (PEEK), polyethylene (PE), poly(ethyl acrylate) (PEA), polyisoprene (PI), polylactide (PLA), poly(methyl methacrylate) (PMMA), " polypropylene (PP), polypyrrole (PPy)," polystyrene (ps)/ i i7,27,30,49-64 poiy inyl acetate) (PVAc), poly(vinyl alcohol) (PVA), poly(vinyl chloride) (PVC) and thermoplastic polyurethane (TPU), and thermosets include Bakelite, butadiene rubber, epoxy,polydimethylsiloxane (PDMS), polyurethane (PU), styrene-butadiene rubber (SBR) and unsaturated polyester resin. 

---