Polycarbonate, comparative properties

Properties of polycarbonates compared with some thermoplastics ... 

Polycarbonates are an unusual and extremely useful class of polymers. The vast majority of polycarbonates are based on bisphenol A [80-05-7] (BPA) and sold under the trade names Lexan (GE), Makrolon (Bayer), CaUbre (Dow), and Panlite (Idemitsu). BPA polycarbonates [25037-45-0] having glass-transition temperatures in the range of 145—155°C, are widely regarded for optical clarity and exceptional impact resistance and ductiUty at room temperature and below. Other properties, such as modulus, dielectric strength, or tensile strength are comparable to other amorphous thermoplastics at similar temperatures below their respective glass-transition temperatures, T. Whereas below their Ts most amorphous polymers are stiff and britde, polycarbonates retain their ductiUty. 

Hydrolysis studies compared a polycarbonate urethane with a poly(tetramethyl-ene adipate) urethane and a polyether urethane based on PTMEG. After 2 weeks in 80°C water, the polycarbonate urethane had the best retention of tensile properties [92], Polycarbonates can hydrolyze, although the mechanism of hydrolysis is not acid-catalyzed, as in the case of the polyesters. Polycarbonate polyurethanes have better hydrolysis resistance than do standard adipate polyurethanes, by virtue of the highest retention of tensile properties. It is interesting to note in the study that the PTMEG-based urethanes, renowned for excellent hydrolysis resistance, had lower retention of physical properties than did the polycarbonate urethanes. 

ABS has a specific gravity of 1.03 to 1.06 and a tensile strength in the range of 6 to 7.5 X 10 psi. These polymers are tough plastics with outstanding mechanical properties. A wide variety of ABS modifications are available with heat resistance comparable to or better than polysulfones and polycarbonates (noted later in this section). Another outstanding property of ABS is its ability to be alloyed with other thermoplastics for improved properties. For example, ABS is alloyed with rigid PVC for a product with better flame resistance. 

Traditionally, ultrafilters have been manufactured from cellulose acetate or cellulose nitrate. Several other materials, such as polyvinyl chloride and polycarbonate, are now also used in membrane manufacture. Such plastic-type membranes exhibit enhanced chemical and physical stability when compared with cellulose-based ultrafiltration membranes. An important prerequisite in manufacturing ultrafilters is that the material utilized exhibits low protein adsorptive properties. 

Polycarbonate is blended with a number of polymers including PET, PBT, acrylonitrile-butadiene-styrene terpolymer (ABS) rubber, and styrene-maleic anhydride (SMA) copolymer. The blends have lower costs compared to polycarbonate and, in addition, show some property improvement. PET and PBT impart better chemical resistance and processability, ABS imparts improved processability, and SMA imparts better retention of properties on aging at high temperature. Poly(phenylene oxide) blended with high-impact polystyrene (HIPS) (polybutadiene-gra/f-polystyrene) has improved toughness and processability. The impact strength of polyamides is improved by blending with an ethylene copolymer or ABS rubber. 

In Section I we introduce the gas-polymer-matrix model for gas sorption and transport in polymers (10, LI), which is based on the experimental evidence that even permanent gases interact with the polymeric chains, resulting in changes in the solubility and diffusion coefficients. Just as the dynamic properties of the matrix depend on gas-polymer-matrix composition, the matrix model predicts that the solubility and diffusion coefficients depend on gas concentration in the polymer. We present a mathematical description of the sorption and transport of gases in polymers (10, 11) that is based on the thermodynamic analysis of solubility (12), on the statistical mechanical model of diffusion (13), and on the theory of corresponding states (14). In Section II we use the matrix model to analyze the sorption, permeability and time-lag data for carbon dioxide in polycarbonate, and compare this analysis with the dual-mode model analysis (15). In Section III we comment on the physical implication of the gas-polymer-matrix model. 

---