Poly effect mechanical properties

The presence of three oxyethylene units in the spacer of PTEB slows down the crystallization from the meso-phase, which is a very rapid process in the analogous polybibenzoate with an all-methylene spacer, P8MB [13]. Other effects of the presence of ether groups in the spacer are the change from a monotropic behavior in P8MB to an enantiotropic one in PTEB, as well as the reduction in the glass transition temperature. This rather interesting behavior led us to perform a detailed study of the dynamic mechanical properties of copolymers of these two poly bibenzoates [41]. 

As an organic polymer, poly(tetramethylene oxide) was also used for the preparation of ceramers. The mechanical properties in these cases were much improved in comparison with those for hybrids from polysiloxanes. In these poly (tetramethylene oxide)-silica hybrids, the effect of the number of functional triethoxysilyl groups was examined [13]. As shown in Fig. 2, more multifunctional organic polymer produced more crosslinked hybrid networks. This means that the more rigid the structure in the hybrids is, the higher the modulus and the lower swelling property. 

This article is an overview of the novel technology of self-reinforced LCPs with polyesters, poly(ethylene terephthalate) (PET) and poly(ethylene naphtha-late) (PEN) [10-13, 21, 23], LCP/polyester blends in a polyester matrix form in situ fibrils which improve the mechanical properties. LCPs have an inherently low melt viscosity, and provide LCP/polyester blends that effectively lower the melt viscosity during melt spinning [24], and fast injection-molding cycles. The miscibility between the LCP and polyesters can be controlled by the degree of transesterification [25] in the reactive extrusion step, and fibril formation in LCP-reinforced polyester fibers has been studied. 

FIGURE 14.9 Influence of temperature on the stress-strain behavior of a sample of poly(methyl methacrylate). (Modeled after Carswell, T.S. and Nason, H.K. Effects of Environmental Conditions on the Mechanical Properties of Organic Plastics, 1944. Copyright, ASTM, Philadelphia, PA. With permission.)... 

Wang S, Huang Y, Cong G (1997) Study on nitrile-butadiene rubber/poly(propylene carbonate) elastomer as coupling agent of poly(vinyl chloride)/poly(propylene carbonate) blends I. Effect on mechanical properties of blends. J Appl Polym Sci 63 1107-1 111... 

S.C. Tjong and Y.Z. Meng, Effect of reactive compatibilizers on the mechanical properties of polycarbonate/poly(acrylonitrile-buta-diene-styrene) blends, Enr. Polym. J., 36(1) 123-129, January 2000. 

The purpose of this paper is to investigate the mechanical properties (plastic deformation, micromechanisms of deformation, fracture) of several amorphous polymers considered in [1], i.e. poly(methyl methacrylate) and its maleimide and glutarimide copolymers, bisphenol A polycarbonate, aryl-aliphatic copolyamides. Then to analyse, in each polymer series, the effect of chemical structure on mechanical properties and, finally, to relate the latter to the motions involved in the secondary transitions identified in [ 1] (in most cases, the p transition). 

---