Poly crosslinking groups

Title Process for Preparing Poly(Arylene Ethers) with Pendant Crosslinkable Groups... 

BMI was also used as a crosslinking agent for poly(iminoethylene). The Michael addition takes place with the nucleophilic nitrogen of the imino group and the double bonds of the electrophilic BMI. The Michael addition of BMI is now adopted as a crosslinking reaction for polymers with amino end groups [2]. 

As an organic polymer, poly(tetramethylene oxide) was also used for the preparation of ceramers. The mechanical properties in these cases were much improved in comparison with those for hybrids from polysiloxanes. In these poly (tetramethylene oxide)-silica hybrids, the effect of the number of functional triethoxysilyl groups was examined [13]. As shown in Fig. 2, more multifunctional organic polymer produced more crosslinked hybrid networks. This means that the more rigid the structure in the hybrids is, the higher the modulus and the lower swelling property. 

Polyurethanes are thermoset polymers formed from di-isocyanates and poly functional compounds containing numerous hydroxy-groups. Typically the starting materials are themselves polymeric, but comprise relatively few monomer units in the molecule. Low relative molar mass species of this kind are known generally as oligomers. Typical oligomers for the preparation of polyurethanes are polyesters and poly ethers. These are usually prepared to include a small proportion of monomeric trifunctional hydroxy compounds, such as trimethylolpropane, in the backbone, so that they contain pendant hydroxyls which act as the sites of crosslinking. A number of different diisocyanates are used commercially typical examples are shown in Table 1.2. 

Aryloxyphosphazene copolymers can also confer fireproof properties to flammable materials when blended. Dieck [591] have used the copolymers III, and IV containing small amounts of reactive unsaturated groups to prepare blends with compatible organic polymers crosslinkable by the same mechanism which crosslinks the polyphosphazene, e.g. ethylene-propylene and butadiene-acrylonitrile copolymers, poly(vinyl chloride), unsaturated urethane rubber. These blends were used to prepare foams exhibiting excellent fire retardance and producing low smoke levels or no smoke when heated in an open flame. Oxygen index values of 27-56 were obtained. 

A recent development has been the synthesis of bioerodible poly-phosphazenes that bear glyceryl side groups (35). The synthesis of these polymers requires a protection-deprotection sequence to reduce the functionality of the glycerol and prevent crosslinking. 

In summary, we have examined several new methods for cleaving ester groups in poly(styrene-b-alkyl methacrylates). Short blocks of methyl methacrylate are very difficult to hydrolyze, but can be cleaved with reagents such as lithium iodide and potassium trimethylsilanolate. These latter reagents, however, result in side-reactions which appear to crosslink the polymer. 

---