Polar functions vinylic copolymers

A long-standing goal in polyolefins is the synthesis of polymers bearing polar functional groups such as acrylate, esters, or vinyl ethers, etc [24,40]. These copolymers might endow polyolefins with useful properties such as adhesiveness, dyeability, paintability, and print-ibility. Advances have recently been made in polymerizing polar monomers with cationic metallocene catalysts... 

Rhodium precipitation in solubilized rhodium-phosphite complex catalyzed liquid recycle hydroformylation may be minimized or prevented by carrying out product recovery in the presence of an organic polymer containing polar functional groups such as amides, ketones, carbamates, ureas and carbonates.[20] Patent examples include the use of polyvinylpyrrolidone and vinylpyrrolidone-vinyl acetate copolymer with diorganophosphite-modified rhodium catalysts. 

By the use of the polymer-linking method with 20a, a variety of starshaped poly(vinyl ethers) have been synthesized (Scheme 12) [208-212]. A focus of these syntheses is to introduce polar functional groups, such as hydroxyl and carboxyl, into the multiarmed architectures. These functionalized star polymers include star block (23a,23b) [209,210], heteroarm (24) [211], and core-functionalized (25) [212] star polymers. Scheme 12 also shows the route for the amphiphilic star block polymers (23b) where each arm consists of an AB-block copolymer of 1BVE and HOVE [209] or a vinyl ether with a pendant carboxyl group [210], Thus, this is an expanded version of triarmed and tetraarmed amphiphilic block copolymers obtained by the multifunctional initiation (Section VI.B.2) and the multifunctional termination (Section VI.B.3). Note that, as in the previously discussed cases, the hydrophilic arm segments may be placed either the inner or the outer layers of the arms. 

Polyethylene (PE) is a family of addition polymers based on ethylene. Polyethylene can be linear or branched, homopolymer, or copolymer. In the case of a copolymer, the other comonomer can be an alkene such as propene, butene, hexene, or octene or a compound having a polar functional group such as vinyl acetate (VA), acrylic acid (AA), ethyl acrylate (EA), or methyl acrylate (MA). If the molar percent of the comonomer is less than 10%, the polymer can be classified as either a copolymer or homopolymer. Figure 4.1 presents a diagram of the family of polymers based on ethylene monomer. 

Ethylene can be copolymerized with alkene compounds or monomers containing polar functional groups, such as vinyl acetate and acrylic acid. Branched ethylene/ alkene copolymers are essentially the same as LDPE, since in commercial practice a certain amount of propylene or hexene is always added to aid in the control of molecular weight. 

The isopropyl group discourages P-H transfer, leading to the exclusive formation of Al-PEs. The Al-PEs can be readily transformed to a variety of functionalized PEs and to PE-based and polar polymer-based block and graft copolymers, using established methods. The selective synthesis of vinyl- and Al-terminated PEs with Zr-FI catalysts shows the critical importance of the substituent on the imine-N for polymerization catalysis. 

The results of the block copolymerization of St, MMA, AA, and VAc with the polymers obtained by 7 and 8 are shown in Table 3. The yields of the block copolymers with 42 and 43 were as high as 70-90%. These block copolymer syntheses are advantageous for the synthesis of the polymer consisting of many kinds of vinyl monomer units, especially polar and functional monomers. 

In PE/aluminium laminates, which are used for packaging, the bond strength can be improved by surface oxidation of the polymer. An alternative to surface oxidation is to use copolymers of ethylene and monomers containing polar groups that can provide stronger bonds to metal thus increasing adhesion [24,25]. The effects of three functional groups in ethylene copolymers, namely EVS [polyethylene-co-vinyl trimethoxy silane], EBA [polyethylene-co-butyl acrylate], EAA [polyethylene-co-acrylic acid) on the adhesion was studied [25]. The interface in polymer/metal laminates has been analysed by FT-IR... 

Most research into the study of dispersion polymerization involves common vinyl monomers such as styrene, (meth)acrylates, and their copolymers with stabilizers like polyvinylpyrrolidone (PVP) [33-40], poly(acrylic acid) (PAA) [18,41],poly(methacrylicacid) [42],or hydroxypropylcellulose (HPC) [43,44] in polar media (usually alcohols). However, dispersion polymerization is also used widely to prepare functional microspheres in different media [45, 46]. Some recent examples of these preparations include the (co-)polymerization of 2-hydroxyethyl methacrylate (HEMA) [47,48],4-vinylpyridine (4VP) [49], glycidyl methacrylate (GMA) [50-53], acrylamide (AAm) [54, 55], chloro-methylstyrene (CMS) [56, 57], vinylpyrrolidone (VPy) [58], Boc-p-amino-styrene (Boc-AMST) [59],andAT-vinylcarbazole (NVC) [60] (Table 1). Dispersion polymerization is usually carried out in organic liquids such as alcohols and cyclohexane, or mixed solvent-nonsolvents such as 2-butanol-toluene, alcohol-toluene, DMF-toluene, DMF-methanol, and ethanol-DMSO. In addition to conventional PVP, PAA, and PHC as dispersant, poly(vinyl methyl ether) (PVME) [54], partially hydrolyzed poly(vinyl alcohol) (hydrolysis=35%) [61], and poly(2-(dimethylamino)ethyl methacrylate-fo-butyl methacrylate)... 

---