Plastics rigidity

ISO 178 2004 Plastics - Determination of flexural properties ISO 1209-1 1990 Cellular plastics, rigid - Flexural tests - Part 1 Bending test ISO 1209-2 1990 Cellular plastics, rigid - Flexural tests - Part 2 Determination of flexural properties... [Pg.172]

ISO 2285 2001 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load ISO 7616 1986 Cellular plastics, rigid - Determination of compressive creep under specified load and temperature conditions... [Pg.176]

Rigidity or plasticization rigid or unplasticized PVC (PVC-U), semi-rigid PVC, flexible or soft PVC. [Pg.310]

Fig. 1-10 Stress-strain plots for a typical elastomer, flexible plastic, rigid plastic, and fiber.

Describe the differences in the properties and uses of flexible plastics, rigid plastics, fibers, and elastomers. What types of chemical structures are typical of each ... [Pg.38]

For cellular elastomers and cellular plastics, rigid or flexible, the back and sides of the test specimen must be wrapped with aluminum foil and asbestos cement board used as backing. Other special requirements for cellular materials are also in effect. [Pg.380]

ISO 1209 - Part 1-90 Cellular Plastics, Rigid Flexural Tests —Part 1 Bending Test, First Edition, 6 pp... [Pg.448]

ISO 2796-86 Cellular Plastics, Rigid Test For Dimensional Stability, 3 PP... [Pg.449]

ISO 2896-87, Cellular Plastics, Rigid — Determination of Water Absorption, 1 pp... [Pg.450]

ISO 7616-86 Cellular Plastics, Rigid —Determination of Compressive Creep Under Specified Load and Temperature Conditions, 4 pp... [Pg.452]

ISO 8873-87 Cellular Plastics, Rigid - ray Applied Polyurathane Foam for Thermal Insulation of Buildings - Specification, 8 pp... [Pg.452]

Because Formula (2.45) is identical to the experimentally obtained Formula (2.41), it is obvious that the structural diagram (Figure 2.44) adequately describes the behavior of rubber concretes at compression and can be added to the basis of the creep equation of these materials. (The similar diagram corresponds to a number of plastic [rigid PVC, polyethylene] and furan polymeric concrete.)... [Pg.68]

Below is the infrared spectra of traditional bis (2-ethyUiexyl) phthalate (DEHP) plasticized rigid PVC and PVC materials used in medical infusion equipment. [Pg.177]

ISO 2796, Cellular plastics, rigid—Test for dimensional stability, 1986. [Pg.169]

ISO 1209 2. Cellular plastics, rigid-flexural tests Part 2. Determination of flexural properties. 1990. [Pg.404]

ISO 2896. Cellular plastics, rigid—Determination of water absorption. 1987. [Pg.405]

Chem. Descrip. Aluminum hydroxide CAS 21645-51-2 EINECS/ELINCS 244-492-7 Uses Eiller, flame retardant for thermoplastics and thermoplastic elastomers (PP, PE and copolymers, EVA), PVC (plasticized, rigid, foam), crosslinked elastomer cable and conveyor belts, powd. coatings Properties Powd. 1.3-2.6 pm median particle size dens. 2.4 g/cc bulk dens. 400 kg/m surf, area 3-5 mVg oil absorp. 25-30 cc/100 g brightness (TAPPI) > 94 ref. index 1.58 pH 9 1 conduct. < 100 pS/cm 99.6% act. [Pg.508]

Chem. Descrip. Calcium carbonate coated by org. media CAS 471-34-1 EINECS/ELINCS 207-439-9 Uses Eiller in plastics (rigid PVC, window profiles, cables, calendered sheets, profiles, pipes, moldings, polyolefins, wh. masterbatches), paints (high-gloss enamels), elastomers... [Pg.529]

Chem. Descrip. Calcium carbonate coated by org. media CAS 471-34-1 EINECS/ELINCS 207-439-9 Uses Eiller in plastics (rigid PVC, cables, calendered sheets, moldings, polyolefins, wh. masterbatches), paints (gloss enamels), elastomers Features Completely compat. with organic media easily dispersed Properties Wh. rhombohedral ctyst. fineness 57% < 2 p dens. 2.7 g/ cm bulk dens. 1.1 g/cm (packed) oil absorp. 15/100 g powd. brightness 97.5% ref. index 1.59 pH 9 hardness (Mohs) 3 Microblanc TMB [Microfill K. Zafranas]... [Pg.529]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...