3-Picoline catalyst

Picoline Catalyst from Atom % deuterium Average No. of deuterium atoms at Deuterium distribution ... 

A solution of sodamide in liquid ammonia (essentially the amide NHj ion) is a very powerful alkylation catalyst, enabling condensations to be carried out with ease and in good yield which are otherwise either impossible or proceed with difficulty and are accompanied by considerable by-products. Thus 3-alkylpjTidines, otherwise inaccessible, are easily prepared from 3-picoline (see 3-n-amylpyridine in Section V,20). Also benzyl cyanide (I) and cyclohexyX bromide give a- r/ohexylphenylacetonitrile (II) ... 

Reactions with Ammonia and Amines. Acetaldehyde readily adds ammonia to form acetaldehyde—ammonia. Diethyl amine [109-87-7] is obtained when acetaldehyde is added to a saturated aqueous or alcohoHc solution of ammonia and the mixture is heated to 50—75°C in the presence of a nickel catalyst and hydrogen at 1.2 MPa (12 atm). Pyridine [110-86-1] and pyridine derivatives are made from paraldehyde and aqueous ammonia in the presence of a catalyst at elevated temperatures (62) acetaldehyde may also be used but the yields of pyridine are generally lower than when paraldehyde is the starting material. The vapor-phase reaction of formaldehyde, acetaldehyde, and ammonia at 360°C over oxide catalyst was studied a 49% yield of pyridine and picolines was obtained using an activated siHca—alumina catalyst (63). Brown polymers result when acetaldehyde reacts with ammonia or amines at a pH of 6—7 and temperature of 3—25°C (64). Primary amines and acetaldehyde condense to give Schiff bases CH2CH=NR. The Schiff base reverts to the starting materials in the presence of acids. 

Reaction with Ammonia. Although the Hquid-phase reaction of acrolein with ammonia produces polymers of Htde interest, the vapor-phase reaction, in the presence of a dehydration catalyst, produces high yields of [ -picoline [108-99-6] and pyridine [110-86-4] n.2L mXio of approximately 2/1. 

Reaction of formaldehyde, methanol, acetaldehyde, and ammonia over a siUca alumina catalyst at 500°C gives pyridine [110-86-1] and 3-picoline... 

Acrolein and ammonia give P-picoline (3, R — H) (eq. 17). Acrolein, ammonia, and acetaldehyde give pyridine (1) (eq. 19). Acrolein, ammonia, and propionaldehyde give (3) (eq. 20) (52—56). Reactions are performed in the vapor phase with proprietary catalysts. 

Another of the few selective syntheses of aLkylpyridines is one for a-picoline (2) (76). This is a two-step process (eq. 24) where acrylonitrile is used to monocyanoethylate acetone in the Hquid phase at 180°C and at autogenous pressure, 2 MPa (300 psig). The monoadduct, 5-cyano-2-pentanone, is then passed over a palladium-containing catalyst to reduce, cyclize, and dehydrogenate, in sequence. 

Phenols. Phenols are unreactive toward chloroformates at room temperature and at elevated temperatures the yields of carbonates are relatively poor (< 10%) in the absence of catalysis. Many catalysts have been claimed in the patent Hterature that lead to high yields of carbonates from phenol and chloroformates. The use of catalyst is even more essential in the reaction of phenols and aryl chloroformates. Among the catalysts claimed are amphoteric metals or thek haUdes (16), magnesium haUdes (17), magnesium or manganese (18), secondary or tertiary amines such as imidazole (19), pyridine, quinoline, picoline (20—22), heterocycHc basic compounds (23) and carbonamides, thiocarbonamides, phosphoroamides, and sulfonamides (24). 

The formation of trace amounts of 2,2 -bipyridine following reaction between pyridine and ammonia in the presence of a variety of catalysts led Wibaut and Willink to develop a method for the preparation of 2,2 -bipyridine from pyridine under the influence of a nickel-alumina catalyst. Using a pyridine-to-catalyst ratio of 10 1, temperatures between 320° and 325°C, and pressures between 42 and 44 atm, 2,2 -bipyridine was formed in yields of 0.30-0.67 gm per gram of catalyst. This method w as later applied to -picoline, to quino-line, - and to some of its derivatives, ... 

Reaction of -picoline with a nickel-alumina catalyst has been reported to give a mixture of four isomeric dimethylbipyridines, one of which has been identified at 6,6 -dimethyl-2,2 -bipyridine. With palladium-on-carbon, 2,4-lutidine was found to be more reactive than pyridine,and the isolated biaryl has been assigned the structure (2). However, some confusion arises from the statement that this... 

Several products other than 2,2 -biaryls have been isolated following reaction of pyridines with metal catalysts. From the reaction of a-picoline with nickel-alumina, Willink and Wibaut isolated three dimethylbipyridines in addition to the 6,6 -dimethyl-2,2 -bipyridine but their structures have not been elucidated. From the reaction of quinaldine with palladium-on-carbon, Rapoport and his co-workers " obtained a by-product which they regarded as l,2-di(2-quinolyl)-ethane. From the reactions of pyridines and quinolines with degassed Raney nickel several different types of by-product have been identified. The structures and modes of formation of these compounds are of interest as they lead to a better insight into the processes occurring when pyridines interact with metal catalysts. 

During this work the presence of small quantities of piperidine and -picoline were also noticed. The exact mode of formation of these products remains to be elucidated, but the formation of piperidine shows that sufficient hydrogen remains on the catalyst to bring about some hydrogenation of the pyridine. 

In 1965, Breslow and Chipman discovered that zinc or nickel ion complexes of (E)-2-pyridinecarbaldehyde oxime (5) are remarkably active catalyst for the hydrolysis of 8-acetoxyquinoline 5-sulfonate l2). Some years later, Sigman and Jorgensen showed that the zinc ion complex of N-(2-hydroxyethyl)ethylenediamine (3) is very active in the transesterification from p-nitrophenyl picolinate (7)13). In the latter case, noteworthy is a change of the reaction mode at the aminolysis in the absence of zinc ion to the alcoholysis in the presence of zinc ion. Thus, the zinc ion in the complex greatly enhances the nucleophilic activity of the hydroxy group of 3. In search for more powerful complexes for the release of p-nitrophenol from 7, we examined the activities of the metal ion complexes of ligand 2-72 14,15). 

Interesting hydrocarbon oxidations have been observed using Fe(II) catalysts with oxygen or hydrogen peroxide as the oxidant. These catalytic systems have become known as Gif chemistry after the location of their discovery in France.287 An Oxidations improved system involving Fe(III), picolinic acid, and H202 has been developed. The... 

These results strongly indicated that the minimum requirements for the ligand were two amides and one nitrogen atom on picoline. However, the real active Mo catalyst is not clear. 

Besides direct reduction, a one-pot reductive amination of aldehydes and ketones with a-picoline-borane in methanol, in water, and in neat conditions gives the corresponding amine products (Scheme 8.2).40 The synthesis of primary amines can be performed via the reductive amination of the corresponding carbonyl compounds with aqueous ammonia with soluble Rh-catalyst (Eq. 8.17).41 Up to an 86% yield and a 97% selectivity for benzylamines were obtained for the reaction of various benzaldehydes. The use of a bimetallic catalyst based on Rh/Ir is preferable for aliphatic aldehydes. 

In 1991, Lima Neto, Pardey, Ford and coworkers121 reported a detailed kinetics investigation of the RhCl3 catalyst in aqueous picoline using a continuously stirred tank reactor (CSTR). Some of the data are tabulated in Table 31. The activation energy (80-120 °C) was 7.4 kcal/mol (31 kJ/mol). 

Very interestingly, contrary to the water-gas rates, the most active catalysts for the reduction of nitrobenzene to aniline in water-gas shift conditions were those containing the sterically hindered 2-picoline and 2,6-lutidine. 

The water-gas shift rates are obviously much lower when heterogenized in comparison with the Rh complexes in homogeneous solutions of the amines (also see Tables 30-33). Kinetics for nitrobenzene reduction were performed for the cis-[Rh(CO)2(2-picoline)2]PF6 catalyst, and reported in 2000. Kinetics displayed a first order dependence on Pco over the range 0-1.9 atm in the temperature range 80-120 °C. As with the kinetics previously reported by Lima Neto and coworkers,121 it was suggested that the CO addition preceded the rate limiting step. A non-linear dependence on the rate versus Rh concentration, as with the previous study, suggested participation by both mononuclear and polynuclear species. 

Lead difluoride is used in low melting glasses in glass coatings to reflect infrared rays in phosphors for television-tuhe screens for nickel plating on glass and as a catalyst for the manufacture of picoline. 

Optimized reaction conditions call for the use of Wilkinson s catalyst in conjunction with the organocatalyst 2-amino-3-picoline (60) and a Br0nsted add. Jun and coworkers have demonstrated the effectiveness of this catalyst mixture for a number of reactions induding hydroacylation and C—H bond fundionalization [25]. Whereas, in most cases, the Lewis basic pyridyl nitrogen of the cocatalyst ads to dired the insertion of rhodium into a bond of interest, in this case the opposite is true - the pyridyl nitrogen direds the attack of cocatalyst onto an organorhodium spedes (Scheme 9.11). Hydroamination of the vinylidene complex 61 by 3-amino-2-picoline gives the chelated amino-carbene complex 62, which is in equilibrium with a-bound hydrido-rhodium tautomers 63 and 64. 

As seen in many of the above examples, acetic anhydride and zinc chloride each make effective condensation catalysts for the free bases, presumably by efficient coordination with the ring nitrogen. The quaternary salts condense readily in the presence of piperidine. Potassium hydroxide, methoxide or piperidinium acetate are suitable for condensations with 2- and 4-methylpyridine AAoxides. For example, the Claisen condensation is effective with these Af-oxides using ethoxide catalyst (Scheme 45) but the reaction fails with the parent picolines unless activated by nitro substitution (69JHC775). 

---