Phosphines dimethyl sulfoxide

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

The red and orange forms of RhCl[P(C6H5)3]3 have apparently identical chemical properties the difference is presumably due to different crystalline forms, and possibly bonding in the solid. The complex is soluble in chloroform and methylene chloride (dichloromethane) to about 20 g./l. at 25°. The solubility in benzene or toluene is about 2 g./l. at 25° but is very much lower in acetic acid, acetone, and other ketones, methanol, and lower aliphatic alcohols. In paraffins and cyclohexane, the complex is virtually insoluble. Donor solvents such as pyridine, dimethyl sulfoxide, or acetonitrile dissolve the complex with reaction, initially to give complexes of the type RhCl[P(C6H6)3]2L, but further reaction with displacement of phosphine may occur. 

Several reports have appeared on the effect of additives on the Pauson-Khand reaction employing an alkyne-Co2(CO)6 complex. For example, addition of phosphine oxide improves the yields of cyclopentenones 119], while addition of dimethyl sulfoxide accelerates the reaction considerably [20]. Furthermore, it has been reported that the Pauson-Khand reaction proceeds even at room temperature when a tertiary amine M-oxide, such as trimethylamine M-oxide or N-methylmorpholine M-oxide, is added to the alkyne-Co2(CO)6 complex in the presence of alkenes [21]. These results suggest that in the Pauson-Khand reaction generation of coordinatively unsaturated cobalt species by the attack of oxides on the carbonyl ligand of the alkyne-Co2(CO)6 complex [22] is the key step. With this knowledge in mind, we examined further the effect of various other additives on the reaction to obtain information on the mechanism of this rearrangement. 

In high polarity solvents, such as acetonitrile, dimethyl sulfoxide, methyl acetate, and methanol, the branched dimer, 4-methyl azelate precursor, is formed in high yield. In methanol, a methoxy dimer (CH302CCgH] 4(0013)0020113) is also formed in moderate yield. Heavies contain both an acyclic methyl, 4-pentadienoate trimeric product and high molecular weight methyl, 4-pentadienoate homopolymer. Polymerization in the absence of air(48) appears to be catalyzed by traces of the tertiary phosphine which is used to prepare the palladium dimerization catalyst. 

Other electrochemical processes of organic compounds on Pb electrodes or electrodes with UPD Pb have been studied - formaldehyde [323], oxalic acid [386], trichloro- and trifluoroethane [387], 1-phenylethylamine [388], 3-hydroxychi-nuclidine [388], dichlorodifluoromethane [389], polychlorobenzenes [390], 1-propa-nol [391], pyrrole polymerization [392], and inorganic compounds - phosphine [388] and sulfate(IV) ions [393]. Simultaneous catalytic or inhibiting influence of organic solvents - acetonitrile, dimethyl-sulfoxide, and Pb + presence on electrooxidation of small organic molecules on Pt electrodes has been studied using on-line mass spectroscopy [394],... 

Dimethyl sulfoxide, phosphine oxides and arsine oxides 753... 

Table 28 Complexes of Dimethyl Sulfoxide and Phosphine and Arsine Oxides...

Acoustic emission diazine metal complexes, 80 Acrylonitrile metal complexes, 263 Actinide complexes cupferron, 510 dimethyl sulfoxide IR spectra, 490 phosphines SHAB theory, 1040 phthalocyanines, 864 thiocyanates, 236 Actins, 973 Acylates H3-ligands... 

An ab initio method has been employed to study the mechanism of the thermal isomerization of buta-1,2-diene to buta-1,3-diene. The results of the study have indicated619 that the transformation proceeds in a stepwise manner via a radical intermediate. Experimental free energies of activation for the bond shift in halocyclooctatetraenes have been reported and analyzed by using ab initio MO calculations.620 The isomerization of hexene using a dihydridorhodium complex in dimethyl sulfoxide has been reported,621 and it has been suggested622 that the Pd(II)-catalysed homogeneous isomerization of hexenes proceeds by way of zr-allylic intermediates. A study has been made623 of alkene isomerization catalysed by the rhodium /-phosphine-tin dichloride dimeric complex, and the double-bond isomerization of olefinic amines over potassium amide loaded on alumina has been described.624... 

The solubility of rare earth hydrides in organic solvents is increased by appropriate additives, too. For this purpose the hydrides are reacted with electron-donor ligands such as alkyl benzoates, alkyl propionates, alkyl tolu-ates, dialkylethers, cyclic ethers, alkylated amines, N,N -dimclhylacelamide, AT-methyl-2-pyrrolidone, trialkyl and triaryl phosphines, trialkyl phosphates and triaryl phosphates, trialkyl phosphates, hexamethylphosphoric triamide, dimethyl sulfoxide, etc. Prior to use as a polymerization catalyst the prereacted mixture of the rare earth hydride plus the additive is prereacted with Al-alkyl-based Lewis acids in the temperature range of 60-100 °C for 10 min to 24 h [351,352]. 

Unsubstituted secondary phosphine 2 was obtained by the reaction of the dichloride 101 with phosphine PH3 in a toluene/dimethyl sulfoxide (DMSO)/water mixture (75% yield). The reactivity of the PH function of 2 and its BH3 adduct 3 was examined in deprotonation and alkylation reactions. Compounds 2 and 3 were shown to readily react with diphenyl(vinyl)phosphine and 2-vinylpyridine to give 4 and 5, respectively. Compound 5 was converted into free trisubstituted phosphine 6 upon treatment with diethylamine <1998IC6408>. 

SAFETY PROFILE Poison by inhalation and ingestion. A corrosive eye, skin, and mucous membrane irritant. Potentially explosive reaction with water evolves hydrogen chloride and phosphine, which then ignites. Explosive reaction with 2,6-dimethylpyridine N-oxide, dimethyl sulfoxide, ferrocene-1,1 -dicarboxylic acid, pyridine N-oxide (above 60°C), sodium -L heat. Violent reaction or ignition with BI3, carbon disulfide, 2,5-dimethyl pyrrole + dimethyl formamide, organic matter, zinc powder. Reacts with water or steam to produce heat and toxic and corrosive fumes. Incompatible with carbon disulfide, N,N-dimethyl-formamide, 2,5-dimethylpyrrole, 2,6-dimethylpyridine N-oxide, dimethylsulfoxide, ferrocene-1,1-dicarboxylic acid, water, zinc. When heated to decomposition it emits highly toxic fumes of Cl" and POx. 

Like other actinide tetrahalides, protactinium tetrachloride and tetrabromide form stable complexes with phosphine oxides (48, 55) and iV jAT -dimethylacetamide (24), but the tetrachloride-dimethyl sulfoxide... 

---