Phenylboronic derivative

The crystalline phenylboronate derived by similar treatment of methyl a-L-fucopyranoside was shown to possess the 3,4-cyclic structure (25). This assignment is based on oxidation of compound 25 with methyl sulfoxide-acetic anhydride and the chromatographic identification of... 

A B—0 bond is broken in the case of phenylboron derivatives of o-hydroxybenzyl alcohol (147) where the loss of PhBO is observed,... 

Sowinski and Suffet 297) have used GC/MS to detect boron hydrides at trace levels, whereas Blum and Richter (298) have used capillary columns in the combined GC/MS of a series of phenylboronate derivatives. There have also been recent applications of GC/MS to the TMS derivatives of inorganic anions (299). The TMS derivatives of ammonium arsenates. 

The phenylboronic derivative 1 is particularly interesting as it might contract a dative bond with one of the distal lysine residues. This could noticeably reduce the k0ff constant upon binding to mGlu4 and provide a new pharmacological tool to study this receptor (especially if the lysine residue involved is in lobe 2, i.e. Lys317). Other series of molecules that we have selected for in vitro tests... 

Except for the adsorption of metal ions, chitosan gels can be applied in the adsorption of organic substances. Novel gels from phenylboronate derivatives of chitosan were prepared for the adsorption of saccharides hy Matsumoto et al. [40]. The adsorption characteristics of D-glucose and 1-methyl-a-D-glucoside on the gels were examined and compared with a commercial gel. The resulted showed that the chitosan gels were inferior to the commercial gel in their adsorption capacity. 

A/,A/ -3,5-Bis(trifluoromethyl)phenylboronic Acid Derivative, 594 A/-[Phenyl(pentacarbonylchromium- or-tungsten)]carbenyl, 595 A/-Copper or A/-Zinc Chelate, 595 18-Crown-6 Derivative, 596... 

The parent system 4 has also been jnepared employing a double reductive ring closure of a dinitrodiphenylbenzene derivative (Scheme 25). The required starting material, 195, was prepared using a palladium-catalyzed coupling of 1,4-dibromo-2,5-dinittobenzene with phenylboronic acid and after reaction with tri-ethylphosphite in hot tert-butylbenzene, 4 could be isolated in a moderate yield (92JHC1237). 

For the synthesis of a suitable arylboron compound, usually an aryl halide is converted to an aryllithium or aryl Grignard derivative, and then reacted with a trialkoxyborane to yield an arylboronic ester, e.g. the phenylboronic acid diisopropyl ester 13 from bromobenzene 11 ... 

Our initial studies were directed towards the synthesis and characterization of phenylboronate esters derived from methyl 6-deoxy-/ -D-allopyranoside, methyl a-L-rhamnopyranoside, methyl -L-fucopyranoside, and methyl 6-deoxy-/ -D-glucopyranoside. Previous work (14) in this laboratory indicated that the reaction of triphenylboroxole and methyl... 

Some other enantioselective approaches have been attempted, still with moderate enantioselectivities, by making use of in situ systems containing a chiral NHC precursor. Luo and co-workers reported on the use of the bidentate chiral imidazo-lium salt 16, derived from L-proUne, in combination with [RhCia-COCcod)], leading to an enantiometic excess of around 20% [30]. The use of chiral imidazolium salt 17 in combination with [RhCl(CH2=CHj)j]j by Aoyama afforded slightly better ee (Fig. 7.3) [31 ]. So far, Bohn and co-workers have obtained the best enantioselectivities (up to 38% ee) for the catalytic addition of phenylboronic acid to aromatic aldehydes by using planar chiral imidazolium salts 18, derived from paracyclophane, in combination with [Rh(OAc)2]2 [32]. 

Recently, Suzuki-type reactions in air and water have also been studied, first by Li and co-workers.117 They found that the Suzuki reaction proceeded smoothly in water under an atmosphere of air with either Pd(OAc)2 or Pd/C as catalyst (Eq. 6.36). Interestingly, the presence of phosphine ligands prevented the reaction. Subsequently, Suzuki-type reactions in air and water have been investigated under a variety of systems. These include the use of oxime-derived palladacycles118 and tuned catalysts (TunaCat).119 A preformed oxime-carbapalladacycle complex covalently anchored onto mercaptopropyl-modified silica is highly active (>99%) for the Suzuki reaction of p-chloroacetophenone and phenylboronic acid in water no leaching occurs and the same catalyst sample can be reused eight times without decreased activity.120... 

As compounds exhibiting enhancing effects on CL reactions, a variety of phenols, e.g., firefly luciferin and 6-hydroxybenzothiazole derivatives [12,13], 4-iodophe-nol [14], 4-(4-hydroxyphenyl)thiazole [15], 2-(4,-hydroxy-3 -methoxy-benzyli-dene)-4-cyclopentene-l,3-dione (KIH-201) [16], and 2-(4-hydroxyphenyl)-4,5-diphenylimidazole (HDI) and 2-(4-hydroxyphenyl)-4,5-di(2-pyridyl)imidazole (HPI)[17] (Fig. 6A), and phenylboronic acid derivatives, e.g., 4-phenylylboronic acid [18], 4-iodophenylboronic acid [19], and4-[4,5-di(2-pyridyl)-l //-imidazol-2-yl]phenylboronic acid (DPPA) [20] (Fig. 6B), in the luminol/hydrogen peroxide/peroxidase system are well known. Rhodamine B and quinine are used as sensitizers in the CL-emitting reaction between cerium (IV) and thiol compounds. This CL reaction was successfully applied to the sensitive determination of various thiol drugs [21-32],... 

Indolyltriflates have been used in Suzuki couplings by Mdrour [138, 139]. Thus, the readily available l-(phenylsulfonyl)indol-2-yl triflate (131) smoothly couples with arylboronic acids in 65-91% yield. Similarly, Pd-catalyzed cross-coupling of phenylboronic acid with l-benzyl-2-carbomethoxyindol-3-yl triflate affords the 3-phenyl derivative (62% yield) [139]. 

An interesting asymmetric transformation is the asymmetric conjugate addition to a-acetamidoacryhc ester 30 giving phenylalanine derivative 31, which has been reported by Reetz (Scheme 3.10) [10]. The addition of phenylboronic acid 2m in the presence of a rhodium complex of l,T-binaphthol-based diphosphinite ligand 32 gave a quantitative yield of 31 with up to 11% enantiomeric excess. In this asymmetric reaction the stereochemical outcome is determined at the hydrolysis step of an oxa-7r-aUylrhodium intermediate, not at the insertion step (compare Scheme 3.7). 

A)-Pinanediol ethylboronate with (l,l-dichloroelhyl)lithium yields the (S)-a-chloro boronic ester (89 11 d.r.), which is converted by phenylmagnesium bromide to the (S)-tert-alkylboronate, the same isomer obtained from (S )-pinanediol phenylboronate. The enantiomeric excess of the derived (R)-2-phenyl-2-butanol is 70%. 

Surprisingly, when the same authors started from a 6,8-dichloropurine derivative, the course of the reaction depended on the reagent. Phenylboronic acid showed a marked preference for the 6-position again, while the iron catalyzed coupling of methylmagnesium chloride proceeded selectively in the 8-position (8.3.), The rationale behind the observed selectivity is still unclear.8... 

Polystyrene-derived phenylboronic acids have been used for the attachment of diols (carbohydrates) as boronic esters [667]. Cleavage was effected by treatment with acetone/water or THF/water. This high lability towards water and alcohols severely limits the range of reactions that can be performed without premature cleavage of this linker. Arylboronic acids esterified with resin-bound diols can be oxidatively cleaved to yield phenols (Entry 8, Table 3.36). Alcohols have also been prepared by nucleophilic allylation of aldehydes with polystyrene-bound, enantiomerically enriched allyl-silanes [668], as well as by Pummerer reaction followed by reduction of resin-bound sulfoxides [669]. 

The first work in this field was probably that of Piletsky et al. [84] that described a competitive FILA for the analysis of triazine using the fluorescent derivative 5-[(4,6-dichlorotriazin-2-yl)amino]fluorescein. The fluorescence of the supernatant after incubation was proportional to the triazine concentration and the assay was selective to triazine over atrazine and simazine. The same fluorescent triazine derivative was applied to competitive assays using atrazine-imprinted films [70]. To this end an oxidative polymerization was performed in the presence of the template, the monomer(s) 3-thiopheneboronic acid (TBA) or mixtures of 3-amino-phenylboronic acid (APBA) and TBA (10 1) in ethanol-water (1 1 v/v) where the template is more soluble. The polymers were grafted onto the surface of polystyrene microplates. The poly-TBA polymers yielded a detection limit of 8 pM atrazine whereas for the poly-TBA-APBA plates it was lowered to 0.7 pM after 5 h of incubation. However, a 10-20% decrease in the polymer affinity was observed after 2 months. 

---