Phenols, alkylation thiocyanation

An interesting application of the electrochemical oxidation of thiocyanate ion is the preparation of alkyl and aryl thiocyanates via anodically generated thiocyanogen. Alcohols have been converted to the corresponding thiocyanates by constant current electrolysis of NaSCN in CH2CI2 containing triphenylphosphite and 2,6-lutidinium perchlorate. The yields were fair to good for the primary and secondary alcohols, but no thiocyanate formation was observed with tertiary ones. Similarly, various aromatic amines and phenols were thiocyanated in a two-step procedure, namely electrochemical preparation of (SCN)2 and subsequent reaction with the substrates k... 

Effluents from the manufacture of Pb(CH3)4 can be treated with an alkali metal borohydride, e.g., NaBH4 at pH 8 to 11 to substantially reduce the level of dissolved lead compounds, like [Pb(CH3)3][145, 146]. Zn can also be used [147]. Liquid NH3 and toluene are used to remove solid NH4Clfrom the apparatus for producing Pb(CH3)4 by the NH3- or amine-catalyzed reaction of CH3CI with a PbNa alloy [148]. Stabilization of Pb(CH3)4, and of antiknock fluids containing Pb(CH3)4, is accomplished by addition of compounds, like toluene [149], xylene [141, 150], styrenes [151], naphthalenes [149, 151, 152], anthracenes [152], substituted phenols [141, 152 to 155], olefinic hydrocarbons [152], alcohols [141, 152], amines [155], hydroquinones [156], ethers [141], saturated or unsaturated carboxylic acids [141, 152], esters of phosphoric acid [152], or of sulfuric acid [157], or of sulfonic acids [141], imidazoles [158], alkyl halides and alkyl thiocyanates [141], or tall oil [159] see also Organolead Compounds , Vol. 2, Section 1.1.1.2, to be published. 

Cyanide and thiocyanate anions in aqueous solution can be determined as cyanogen bromide after reaction with bromine [686]. The thiocyanate anion can be quantitatively determined in the presence of cyanide by adding an excess of formaldehyde solution to the sample, which converts the cyanide ion to the unreactive cyanohydrin. The detection limits for the cyanide and thiocyanate anions were less than 0.01 ppm with an electron-capture detector. Iodine in acid solution reacts with acetone to form monoiodoacetone, which can be detected at high sensitivity with an electron-capture detector [687]. The reaction is specific for iodine, iodide being determined after oxidation with iodate. The nitrate anion can be determined in aqueous solution after conversion to nitrobenzene by reaction with benzene in the presence of sulfuric acid [688,689]. The detection limit for the nitrate anion was less than 0.1 ppm. The nitrite anion can be determined after oxidation to nitrate with potassium permanganate. Nitrite can be determined directly by alkylation with an alkaline solution of pentafluorobenzyl bromide [690]. The yield of derivative was about 80t.with a detection limit of 0.46 ng in 0.1 ml of aqueous sample. Pentafluorobenzyl p-toluenesulfonate has been used to derivatize carboxylate and phenolate anions and to simultaneously derivatize bromide, iodide, cyanide, thiocyanate, nitrite, nitrate and sulfide in a two-phase system using tetrapentylammonium cWoride as a phase transfer catalyst [691]. Detection limits wer Hi the ppm range. 

Acrylates/VA copolymer Adipic acid Albumen Alkyl phenol disulfide Ami noethyl piperazine Ammonium lignosulfonate Ammonium perchlorate Ammonium polyacrylate Ammonium thiocyanate Ammonium zirconium carbonate Beeswax Benzidine dihydrochloride N-Benzyldimethylamine Boron trifluoride 1,3-Butanediol dimethacrylate Butyl acetoxystearate Butyl lactate t-Butyl methacrylate Calcium naphthenate p-Carboxyethyi acryiate... 

---