Phenol acid-catalyzed

Let us look, for example, at the reaction of ethylene oxide with phenol. Acid catalyzes reaction by converting the epoxide into the highly reactive protonated epoxide. Base catalyzes reaction by converting the phenol into the more strongly nucleophilic phenoxide ion. 

Two synthetic bridged nitrogen heterocycles are also prepared on a commercial scale. The pentazocine synthesis consists of a reductive alkylation of a pyridinium ring, a remarkable and puzzling addition to the most hindered position, hydrogenation of an enamine, and acid-catalyzed substitution of a phenol derivative. The synthesis is an application of the reactivity rules discussed in the alkaloid section. The same applies for clidinium bromide. 

One of the mdustnal processes for the preparation of phenol discussed in Section 24 6 includes an acid catalyzed rearrangement of cumene hydroperoxide as a key step This reaction proceeds by way of an intermediate hemiacetal... 

Fig. 23. Representative protecting groups for phenolic and carboxylic acid-based systems, (a) The polymer-based protecting groups are fisted in order of increasing activation energy for acid-catalyzed deprotection, (b) Acid-labile monomeric dissolution inhibitors, a bifunctional system based on protected bisphenol A. (c) Another system that combines the function of dissolution inhibitor and PAG in a single unit.

Substitution Reactions on Side Chains. Because the benzyl carbon is the most reactive site on the propanoid side chain, many substitution reactions occur at this position. Typically, substitution reactions occur by attack of a nucleophilic reagent on a benzyl carbon present in the form of a carbonium ion or a methine group in a quinonemethide stmeture. In a reversal of the ether cleavage reactions described, benzyl alcohols and ethers may be transformed to alkyl or aryl ethers by acid-catalyzed etherifications or transetherifications with alcohol or phenol. The conversion of a benzyl alcohol or ether to a sulfonic acid group is among the most important side chain modification reactions because it is essential to the solubilization of lignin in the sulfite pulping process (17). 

Living VE polymerization is usually terminated by addition of alcohols, phenols, amines, etc, that can replace iodide. Without some base present to neutralize generated HI, an aldehyde end group forms if moisture is present because of acid-catalyzed hydrolysis (41). 

The oxidation of cyclohexane to a mixture of cyclohexanol and cyclohexanone, known as KA-od (ketone—alcohol, cyclohexanone—cyclohexanol cmde mixture), is used for most production (1). The earlier technology that used an oxidation catalyst such as cobalt naphthenate at 180—250°C at low conversions (2) has been improved. Cyclohexanol can be obtained through a boric acid-catalyzed cyclohexane oxidation at 140—180°C with up to 10% conversion (3). Unreacted cyclohexane is recycled and the product mixture is separated by vacuum distillation. The hydrogenation of phenol to a mixture of cyclohexanol and cyclohexanone is usually carried out at elevated temperatures and pressure ia either the Hquid (4) or ia the vapor phase (5) catalyzed by nickel. 

FRIES Phenol Esier Rearrangement Rearrangement ol phenol esters to o or p ketophenols Lewis acid catalyzed... 

An ether that would not undergo rearrangement to a 3-alkyl derivative during acid-catalyzed removal of — NH protective groups was required to protect the phenol group in tyrosine. Four compounds were investigated (9-cyclohexyl-, (9-isobomyl-, 0-[l-(5-pentamethylcyclopentadienyl)ethyl]-, and O-isopropyltyro-sine. 

CF3COOH, 2.5% phenol, 30°, 2 h, 65% yield. Zervas and co-workers tried many conditions for the acid-catalyzed formation and removal of the 5-diphenyl methyl, 5-4,4 -dimethoxydiphenylmethyl, and 5-tripheny I methyl thioethers. The best conditions for the 5-diphenylmethyl thioether are shown above. Phenol or anisole act as cation scavengers. 

The ethoxyethyl ether is prepared by acid catalysis from a phenol and ethyl vinyl ether and is cleaved by acid-catalyzed methanolysis. ... 

Phenol-formaldehyde resins are the oldest thermosetting polymers. They are produced by a condensation reaction between phenol and formaldehyde. Although many attempts were made to use the product and control the conditions for the acid-catalyzed reaction described by Bayer in 1872, there was no commercial production of the resin until the exhaustive work by Baekeland was published in 1909. In this paper, he describes the product as far superior to amber for pipe stem and similar articles, less flexible but more durable than celluloid, odorless, and fire-resistant. ° The reaction between phenol and formaldehyde is either base or acid catalyzed, and the polymers are termed resols (for the base catalyzed) and novalacs (for the acid catalyzed). 

The acid-catalyzed reaction occurs by an electrophilic substitution where formaldehyde is the electrophile. Condensation between the methylol groups and the benzene rings results in the formation of methylene bridges. Usually, the ratio of formaldehyde to phenol is kept less than unity to produce a linear fusible polymer in the first stage. Crosslinking of the formed polymer can occur by adding more formaldehyde and a small amount of hexamethylene tetramine (hexamine. 

Mechanism of the formation of phenol by acid-catalyzed rearrangement of cumene hydroperoxide. 

Unlike the acid-catalyzed ether cleavage reaction discussed in the previous section, which is general to all ethers, the Claisen rearrangement is specific to allyl aryl ethers, Ar—O—CH2CH = CH2. Treatment of a phenoxide ion with 3-bromopropene (allyl bromide) results in a Williamson ether synthesis and formation of an allyl aryl ether. Heating the allyl aryl ether to 200 to 250 °C then effects Claisen rearrangement, leading to an o-allylphenol. The net result is alkylation of the phenol in an ortho position. 

Problem 31,11 Propose a mechanism to account for the formation of Bakelite from acid-catalyzed polymerization of phenol and formaldehyde. 

Caglioti et al.201 suggested a mechanism for the action of hexachlorocydotriphos-photriazene in the polyesterification of carboxylic acids with phenols. Higashi291 catalyzed the reaction of various aromatic acids and alcohols by poly(ethyl phosphate). Both Caglioti201 and Higashi291 studied the influence of tertiary amines on the reactivity. 

Phenolic resins were discovered by Baeyer in 1872 through acid-catalyzed reactions of phenols and acetaldehyde. Kleeberg found in 1891 that resinous products could also be formed by reacting phenol with formaldehyde. But it was Baekeland who was granted patents in 1909 describing both base-catalyzed resoles (known as Bakelite resins) and acid-catalyzed novolac products.2... 

The most common precursor to phenolic resins is phenol. More than 95% of phenol is produced via the cumene process developed by Hock and Lang (Fig. 7.1). Cumene is obtained from the reaction of propylene and benzene through acid-catalyzed alkylation. Oxidation of cumene in air gives rise to cumene hydroperoxide, which decomposes rapidly at elevated temperatures under acidic conditions to form phenol and acetone. A small amount of phenol is also derived from coal. 

Alkyl-substituted phenols have different reactivities than phenol toward reaction with formaldehyde. Relative reactivities determined by monitoring the disappearance of formaldehyde in phenol-paraformaldehyde reactions (Table 7.3) show that, under basic conditions, meta-cresol reacts with formaldehyde approximately three times faster titan phenol while ortho- and para-cresols react at approximately one-third the rate of phenol.18 Similar trends were observed for the reactivities of acid-catalyzed phenolic monomers with formaldehyde. 

In general acid catalysis, the rate is increased not only by an increase in [SH ] but also by an increase in the concentration of other acids (e.g., in water by phenols or carboxylic acids). These other acids increase the rate even when [SH ] is held constant. In this type of catalysis the strongest acids catalyze best, so that, in the example given, an increase in the phenol concentration catalyzes the reaction much less than a similar increase in [H30 ]. This relationship between acid strength of the catalyst and its catalytic ability can be expressed by the Breasted catalysis equation ... 

The addition of alcohols and phenols to double bonds is catalyzed by acids or bases. When the reactions are acid catalyzed, the mechanism is electrophilic, with H as the attacking species. The resulting carbocation combines with a molecule of alcohol ... 

Method and device for production of phenol and acetone by means of acid-catalyzed, homogeneous decoposition of cumd-hydroperoxid, WO 01/30732, Phenol-chemie GmbH, Priority 22.10.99. 

---