Phase-transfer catalytic oxidation medium

Phase Transfer Catalytic Oxidation in an Aqueous/Supercritical CO2 Medium... 

Antibody catalysts, role in environmentally benign synthesis of chemicals, 125-126 Aqueous-supercritical carbon dioxide medium, phase-transfer catalytic oxidation, 144-145 Arene cw-dihydrodiols, biocatalytic conversion of aromatics to optically pure synthons for pharmaceutical industry, 180-195... 

Figure 12 Phase transfer catalytic oxidation of cyclohexene to adipic acid in an aque-0US/SCCO2 medium. (From Ref. 24.)...

Epoxides such as ethylene oxide and higher olefin oxides may be produced by the catalytic oxidation of olefins in gas-liquid-particle operations of the slurry type (S7). The finely divided catalyst (for example, silver oxide on silica gel carrier) is suspended in a chemically inactive liquid, such as dibutyl-phthalate. The liquid functions as a heat sink and a heat-transfer medium, as in the three-phase Fischer-Tropsch processes. It is claimed that the process, because of the superior heat-transfer properties of the slurry reactor, may be operated at high olefin concentrations in the gaseous process stream without loss with respect to yield and selectivity, and that propylene oxide and higher... 

Wacker oxidation of olefins to ketones catalyzed by palladium complexes is a well-known process which has been applied to numerous olefins [120]. However, selective oxidation of Cg-Cig a-olefins remains a challenge. Recently, Mortreux et al. have developed a new catalytic system for the quantitative and selective oxidation of higher a-olefins in an aqueous medium [121-123]. For example, 1-decene was oxidized to 2-decanone in 98% yield using PdS04/ H9PV6M06O40/CUSO4 as the catalyst in the presence of per(2,6-di-0-methyl)-j9-cyclodextrin, which probably played the role of a reverse phase transfer reagent [Eq. (22)]. 

Supercritical carbon dioxide represents an inexpensive, environmentally benign alternative to conventional solvents for chemical synthesis. In this chapter, we delineate the range of reactions for which supercritical CO2 represents a potentially viable replacement solvent based on solubility considerations and describe the reactors and associated equipment used to explore catalytic and other synthetic reactions in this medium. Three examples of homogeneous catalytic reactions in supercritical CC are presented the copolymerization of CO2 with epoxides, ruthenium>mediated phase transfer oxidation of olefins in a supercritical COa/aqueous system, and the catalyic asymmetric hydrogenation of enamides. The first two classes of reactions proceed in supercritical CO2, but no improvement in reactivity over conventional solvents was observed. Hythogenation reactions, however, exhibit enantioselectivities superior to conventional solvents for several substrates. 

In three-phase reactors, one of the main problems is often the mass transport limitations, which may reflect internal as well as external mass transfer resistances. The use of filamentous catalytic materials for multiphase reactions may help reduce or even avoid mass transfer limitations [63,132,133]. Filamentous woven cloths made of glass, composite mixed oxides, metallic alloys, or activated carbon (Figure 18) can be used as supports for active components such as platinum, palladium, or transition metal oxides. The diameters of the filaments are of the order of several micrometers and correspond to the typical diameters of catalysts that are suspended in the reaction medium. By using such small diameters, internal mass transfer limitations can be avoided. 

---